プラスチック製チャンネルインサート、XEシリーズレール用
- Use as Dust Cover, Cable Router, or Panel Holder
- Compatible with Channels on 25 mm, 50 mm, and 75 mm Rails
- 2 m Long Polypropylene Extrusion
XE25S2
Channel Insert for XE Rail,
2 m Long
Application Idea
The inserts are reversible and can be used as dust covers, panel holders, or to route cables up Ø4.5 mm.
Please Wait
Compatible Optical Rails | ||
---|---|---|
25 mm Rails | ||
50 mm Rails | ||
75 mm Rails |
特長
チャンネルインサートXE25S2はXEシリーズのレールの溝に取付けられ、ダストカバーやパネルホルダとして、あるいはケーブル配線用としてご使用いただけます。フラットな面を外側にして挿入すると、押出成型されたプラスチックでレール溝のTスロットがカバーされるため、クリーンな状態を必要とする用途において、ほこりや汚れの蓄積を防ぐことができます。これと同じ向きで挿入して、最大径4.5 mmまでのケーブルやワイヤの配線経路としてもご利用いただけます。また、反対向きに挿入して、Tスロット内で厚さ2~3.2 mmのパネルを支えるホルダとしても利用可能です(上の写真参照)。インサートはフレキシブルで、ハサミまたはナイフ等で簡単にカットできます。
Posted Comments: | |
Tamir y
 (posted 2021-05-26 23:35:01.907) I had 4 25mm Rails in a square, with 1 TB4 uncut, used as a lid for a system, when moved, the TB4 was loose inside the rails so I wanted to use the XE25S2 in the rails to hold it steady. unfortunately I did not fit (tried sliding it, fitting the insert on the panel, fitting the panel on the insert inside a rail) together with the TB4 and I had to cut in half (along the length) of the XE25S2 to use as a small insert. cwright
 (posted 2021-05-27 08:25:00.0) Response from Charles at Thorlabs: Thank you for your feedback. The XE25S2 insert is to suit panels 2.0-3.2 mm thick while TB4 is 4.76 mm thick. If fully inserted into the insert this may be a little thick to ensure a smooth fit. |