プラスチック製チャンネルインサート、XEシリーズレール用


  • Use as Dust Cover, Cable Router, or Panel Holder
  • Compatible with Channels on 25 mm, 50 mm, and 75 mm Rails
  • 2 m Long Polypropylene Extrusion

XE25S2

Channel Insert for XE Rail,
2 m Long

Application Idea

The inserts are reversible and can be used as dust covers, panel holders, or to route cables up Ø4.5 mm.

Related Items


Please Wait
Compatible Optical Rails
25 mm Rails
50 mm Rails
75 mm Rails

特長

  • ケーブルの配線、ダストカバー、筐体用パネルホルダなどとして使用可能なリバーシブルのインサート
  • 25 mm50 mmおよび75 mmレールのTスロットに対応
  • 押出成型されたポリプロピレン製

チャンネルインサートXE25S2はXEシリーズのレールの溝に取付けられ、ダストカバーやパネルホルダとして、あるいはケーブル配線用としてご使用いただけます。フラットな面を外側にして挿入すると、押出成型されたプラスチックでレール溝のTスロットがカバーされるため、クリーンな状態を必要とする用途において、ほこりや汚れの蓄積を防ぐことができます。これと同じ向きで挿入して、最大径4.5 mmまでのケーブルやワイヤの配線経路としてもご利用いただけます。また、反対向きに挿入して、Tスロット内で厚さ2~3.2 mmのパネルを支えるホルダとしても利用可能です(上の写真参照)。インサートはフレキシブルで、ハサミまたはナイフ等で簡単にカットできます。


Posted Comments:
Tamir y  (posted 2021-05-26 23:35:01.907)
I had 4 25mm Rails in a square, with 1 TB4 uncut, used as a lid for a system, when moved, the TB4 was loose inside the rails so I wanted to use the XE25S2 in the rails to hold it steady. unfortunately I did not fit (tried sliding it, fitting the insert on the panel, fitting the panel on the insert inside a rail) together with the TB4 and I had to cut in half (along the length) of the XE25S2 to use as a small insert.
cwright  (posted 2021-05-27 08:25:00.0)
Response from Charles at Thorlabs: Thank you for your feedback. The XE25S2 insert is to suit panels 2.0-3.2 mm thick while TB4 is 4.76 mm thick. If fully inserted into the insert this may be a little thick to ensure a smooth fit.
Back to Top

プラスチック製チャンネルインサート、XEシリーズレール用

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
XE25S2 Support Documentation
XE25S2チャンネルインサート、XEシリーズレール用、長さ2 m
¥1,207
Today