Products Home偏光プリズム用マウント
- Full Clear Aperture on All 4 Ports
- Rotating Cover Blocks Unwanted Beams
- Directly Mounts to SM1 & SM05 Series Lens Tubes
SM1PM15
(GL15 Prism Sold Separately)
SM1PM10
(GL10 Prism
Sold Separately)
SM05PM5
(GL5 Prism
Sold Separately)
PRM1GL10
(GL10 Prism
Sold Separately)
SM1PM10 Disassembled
Please Wait
| Item # | SM05PM5 PRM05GL5 | SM1PM10 PRM1GL10 | SM1PM15 |
|---|---|---|---|
| Compatible Polarizer | GL5 (-x) GLB5 (-x) GT5 (-x) GTR5-MIR | GL10 (-x) GLB10 (-x) GT10 (-x) GTR8-MIR | GL15 (-x) GT15 (-x) |
| Threading | External SM05 (0.535"-40) | External SM1 (1.035"-40) | |
特長
- 4ポート全て貫通開口
- 回転カバーが不要なビームを遮蔽
- プリズムは別売り
これらのプリズム用マウントは当社のグランレーザ偏光プリズム、 グランテーラ偏光プリズム、 ルチル偏光プリズムを収納するように設計されています。マウントにプリズムを設置するには、回転カバーを外して横から止めネジ(セットスクリュ)で締め付けてしっかりと固定します。側面の2つの開口部が必要ない時は回転カバーを使って蓋をしてください。
SM1PM10とSM1PM15の筺体にはSM1外ネジが付いており、SM05PM5の筺体にはSM05外ネジが付いています。これらのネジによって、当社の手動、 電動、 精密、およびケージシステム 回転マウントとこのプリズムマウントを直接つなげることができます。
PRM05GL5/MおよびPRM1GL10/Mは、それぞれプリズムマウントSM05PM5またはSM1PM10と12 mm～12.7 mm(1/2インチ)(PRM05/M)または25 mm～25.4 mm(1インチ)(PRM1/M)精密回転マウントのセットです。
| Posted Comments: | |
user
(posted 2022-08-13 14:22:42.857) Can the actuator be replaced with any of your motorized models? ksosnowski
(posted 2022-08-15 04:45:57.0) Thanks for reaching out to Thorlabs. The stock micrometer used on the PRM1GL10 and 1/2" version have too small of a barrel to adapt to our other motorized options. You can instead obtain the Lens Tube mount SM1PM10 and attach this to our motorized version of the PRM1 mount, the PRM1Z8. The 1/2" versions could be attached with an SM1A6 adapter to fit the SM1 threads on the motorized version. Anitta Rose Thomas
(posted 2020-01-15 05:23:50.127) Would it possible to mount PBS101 to SM1PM10 mounts?
Thanks
Anitta YLohia
(posted 2020-01-15 08:42:25.0) Hello Anitta, thank you for contacting Thorlabs. The SM1PM10 cannot be used to mount the PBS101 since the mount is designed for our mounted polarizing prisms, which have a height of 15.9mm. basapc
(posted 2017-11-15 17:32:04.59) Would it be possible to mount a MRA15-E02 15mm 45° mirror?
Thank you very much,
Bassem Salem nbayconich
(posted 2018-01-17 11:11:44.0) Thank you for contacting Thorlabs. The SM1PM10 can be used to mount 15mm right angle prisms such as MRA15-E02. The internal clearance for the height of the prism is about 16.12mm which is compensated by using the adjustable setscrew. The SM1PM15 is too large to mount a 15mm right angle prism. Please note that the clearance holes are not intended for a 90 degree turn of your beam so only small diameter beams can be used with this prism mount. ssss6909
(posted 2016-03-24 14:22:47.44) I want to know about dimension of inner size (mount position) when it is disassembled as CAD pdf. besembeson
(posted 2016-03-24 03:24:57.0) Response from Bweh at Thorlabs USA: I will provide these dimensions to you by email. aklossek
(posted 2014-05-05 07:00:30.533) Dear ladies and gentlemen,
I am planing to use a laser polarizer just to control the laser power. Therefore it would be helpful if the other polarized beam, which is reflected at the interface between the prism is blocked by the mounts.
Do you have something for this application? Of course the material should survive the laser radiation.
Best regards
André Klossek jlow
(posted 2014-05-08 03:57:04.0) Response from Jeremy at Thorlabs: The cover on the lens tube mount can be rotated so you can block the unwanted beam. technicalmarketing
(posted 2008-01-17 12:44:35.0) We have added all the missing drawings and apologize for the inconvenience of not having them readily available. ghegenbart
(posted 2008-01-16 05:39:24.0) Most drawings for these three mounts are missing |
Additional 結晶偏光子
 グランテーラ＆グランレーザ偏光プリズム用マウント |