Products Home高さ調整式V字型クランプ
- Securely Mounts Optics Ranging from Ø1/2" (13 mm) to Ø3.5" (89 mm)
- Locking Screw with V-Shaped Swivel Head Provides Clamping Force
- Simple One-Handed Operation
‘V’ Clamping Screw with Swivel Head
8-32 (M4) Tapped Hole
VG100 Shown Holding a Ø1" Plano-Convex Lens
Application Idea
VG100
Please Wait
特長
- Ø13 mm～Ø89 mmまでの光学素子を取付け
- 幅7 mmの光学素子用溝
- V字型クランプ設計により光学素子をしっかり保持
- 簡単な片手操作
この光学クランプは、厚さ7 mmまでのØ13 mm～Ø89 mmの光学素子をしっかりと保持します。上部プレートの操作によって、さまざまなサイズの光学素子の高さを 素早く調整することができます。上部プレートには便利なスイベル式V字型Delrin®*製チップの付いた調整ネジがあるので、光学部品をしっかり固定します。ポストに取付けが可能なベースには、安定性を高めるためにV溝加工が施されています。全体的に薄型のマウントなので、コンパクトな光学機器の構築に適しています。厚さ7 mm以上の光学部品を保持する用途には、V字型マウントのご使用をお勧めします。
*DelrinはDuPont Polymers社の登録商標です。
| Posted Comments: | |
Jakob Birkhölzer
(posted 2022-11-10 10:22:11.917) I purchased this item.
The construction seems to me not completely metric.
I measured the clamping screw because i plan to make a second tapped bore for it.
It seems to me it is not M5 but #10-32 UNF as read from the STP file.
I would appreciate if this was made clear also in the item description.
When i puchase a "metric" part, i assume ALL the threads are metric. cdolbashian
(posted 2022-11-16 11:34:31.0) Thank you for reaching out to us Jakob. I am sorry for the misunderstanding. For all of our metric vs imperial parts on our website, the differences are minor. Typically the changes are limited to the spacing and threading of mounting holes. As you assessed, the thread is indeed #10-32-2B UNF. We have some information here regarding the differences between our metric and imperial components: https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=9015 yoav.romach
(posted 2017-02-27 19:40:14.303) Is it possible to have an even larger version of this item? We have a 100mm round optic... jlow
(posted 2017-02-27 11:42:53.0) Response from Jeremy at Thorlabs: We have the LMR100(/M), which can be found at https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=1433, to mount 100mm optic. |
V字型、Ø12 mm～12.7 mmポスト用高さ調整