30 mmケージシステム用調整機能付きメカニカルスリット


  • Through Holes for 30 mm Cage System
  • Fine Micrometer Adjustment of Slit Width
  • Central SM05-Threaded Bore

Application Idea

VA100CP Variable Slit with Attached SM05 Lens Tube in a 30 mm Cage System 

VA100CP

Back View
Slit Open

Front View
Slit Nearly Closed

Back View
Slit Closed

Related Items


Please Wait
Variable slit and shutter
Click to Enlarge
View Imperial Product List
型番数量Description
CFH2R130 mmケージシステム用フィルターホルダ、Ø1インチ光学素子用、プレート&ホルダ付属、#8-32タップ穴(インチ規格)
CFH2-V1可変減衰器インサート、CFH2R/M&光ファイバーフィルターマウント用 (ミリ&インチ共用)
ER2-P41Ø6 mmケージアセンブリーロッド、長さ 50.8 mm、4個入り
TR31Ø1/2インチポスト、#8-32ネジ、1/4”-20タップ穴付き、長さ3インチ(インチ規格)
PH21Ø1/2インチポストホルダ、バネ付き六角固定つまみネジ付き、長さ2インチ(インチ規格)
VA100CP130 mmケージシステム用調整機能付きスリット、#8-32タップ穴、インチ規格マイクロメータ(インチ規格)
View Metric Product List
型番数量Description
CFH2R/M130 mmケージシステム用フィルターホルダ、Ø25 mm~Ø25.4 mm光学素子用、プレート&ホルダ付属、M4タップ穴(ミリ規格)
CFH2-V1可変減衰器インサート、CFH2R/M&光ファイバーフィルターマウント用 (ミリ&インチ共用)
ER2-P41Ø6 mmケージアセンブリーロッド、長さ 50.8 mm、4個入り
TR75/M1Ø12.7 mmポスト、M4ネジ、M6タップ穴付き、長さ75 mm(ミリ規格)
PH50/M1Ø12 mm~Ø12.7 mmポストホルダ、バネ付き六角固定つまみネジ付き、長さ50 mm(ミリ規格)
VA100CP/M130 mmケージシステム用調整機能付きスリット、M4タップ穴、ミリ規格マイクロメータ(ミリ規格)
30 mm ケージシステムに組み込んだ調整機能付きスリットVA100CP(/M)および可変減衰器インサートCFH2-V
Item #VA100CPVA100CP/M
Micrometer Graduation0.001" per Division10 µm per Division
Slit Width Adjustment per Rev0.025"0.5 mm
Slit Centering Tolerance±0.003"±0.08 mm
Mounting Hole Tap8-32M4

特長

  • 30 mmケージシステムに垂直ならびに水平方向に配置可能
  • マイクロメータとスリット幅調整は1対1で対応
  • スリットはSM05ネジ付き貫通穴の中心に
  • スリット幅:0.0~6.0 mm
  • M4タップ穴でポストに垂直方向に取付け可能

30 mmケージシステム用メカニカルスリットVA100CP/Mは2枚のA2ツールスチール製のブレードで構成されており、スリット幅はマイクロメータで精密に調整できます。スリットの筐体には30 mmケージロッド用に4つの貫通穴が付いています。各ロッドは2.0 mm六角レンチまたはボール(六角)ドライバを使用して止めネジ(セットスクリュ)で固定します。ケージシステムに取り付ける際の貫通穴の位置によって、スリットは垂直方向か、または水平方向になります。

スリット自体はSM05ネジ付き貫通穴の中心にあり、スリットの幅は組込みのマイクロメータで調整できます。このマウントの独特な設計により、精密マイクロメーターアクチュエータによる調整とその結果としてのスリット幅との間には、20 µm以内で1対1の相関関係が得られています。実際のスリット幅は、完全に閉じられている状態から6.0 mmの幅まで変化します。マイクロメータ1回転あたりでのスリット幅の変化は0.5 mmです。完全に閉じた位置では、2枚のブレードは接触します。しかし、ブレードの不完全性や平行性の程度により、最大25 µmの隙間が生じる場合があります。スリット幅が変化しても、開口部はSM05ネジ付き貫通穴の中心にとどまります。

マウントは薄型なので、コンパクトな光学アセンブリでの使用に適しています。また筐体とブレードは黒色仕上げで、不要な反射を抑えています。底部のM4取付け穴は当社のØ12 mm~Ø12.7 mm(Ø1/2インチ)ポストに対応し、スリットを垂直方向に取付けることができます。貫通穴はSM05ネジ付きでØ12 mm~Ø12.7 mm(Ø1/2インチ)のレンズチューブを含む当社の様々な製品が取り付けられます。当社では標準型の調整機能付きメカニカルスリット(ケージシステム非対応)もご用意しております。


Posted Comments:
user  (posted 2024-03-26 10:01:13.837)
Is there a possibility to have 60 mm cage system adjustable slit?
Robert Turner  (posted 2024-03-22 10:26:50.817)
Not feedback per se, but rather a question: Is it possible to have the VA100/CP with imperial taps and a metric micrometer?
jdelia  (posted 2024-03-22 11:26:04.0)
Thank you for contacting Thorlabs. I have reached out to you directly to discuss the feasibility of this customized item request. For future custom requests, you can email techsales@thorlabs.com.
zhi wang  (posted 2020-06-22 10:12:26.143)
solid works file cannot be opened by solidworks edition 2013, do you have the iges/stp file type of the VA100C
YLohia  (posted 2020-06-22 09:50:20.0)
Thank you for contacting Thorlabs. We will reach out to you directly with these filetypes.
eplingb  (posted 2019-02-01 11:29:52.913)
I'm interested in using your Piezo Inertia Actuator to allow for remote control of the slits. What length of travel actuator should I get?
llamb  (posted 2019-02-04 09:06:39.0)
Thank you for contacting Thorlabs. The variable slits on this page use micrometers with Ø1/4" smooth mounting barrels. Unfortunately the Piezo Inertia Actuators and our other motorized actuators do not have compatible mounting barrels, as they are typically either larger Ø3/8" mounting barrels or 1/4"-80 threaded mounting barrels. I have reached out to you directly to see if there are any suitable alternatives with your application.
cyprian.wozniak  (posted 2018-01-17 09:35:35.567)
is there a motorized version of the actuators for this product (VA100C/M ) ?
tfrisch  (posted 2018-01-17 11:41:31.0)
Hello, thank you for contacting Thorlabs. Unfortunately, we do not have a motorized actuator with the same barrel size (0.25") as the 148-202FT micrometer used in the variable aperture. I will reach out to you with the complete specifications in case you want to use your own motorized actuator.
kamzia1  (posted 2016-09-06 21:58:12.67)
Hello, I have question about this product. What is the thickness of blade edge? I mean width of terminal section of blade. in step drawing file it is drawn as 0.015 in (381 micron) Is this the real thickness? Or is marginal part ommitted? We want slit of 200 micron gap with edge as thin as possible, might be under 1 micron. If the blade is sharp enough we would consider this product as possible option. Please alarm me your specificaion. Sincerely Ji-Hyoun Kim
tfrisch  (posted 2016-09-08 08:55:53.0)
Hello, thank you for contacting Thorlabs. 0.015" is the nominal dimension before accounting for manufacturing tolerances. I will reach out to you directly about your application and whether a precision mounted slit may be useful.
Back to Top

30 mmケージシステム用調整機能付きメカニカルスリット

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
VA100CP Support Documentation
VA100CPCustomer Inspired! 30 mmケージシステム用調整機能付きスリット、#8-32タップ穴、インチ規格マイクロメータ(インチ規格)
¥43,291
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
VA100CP/M Support Documentation
VA100CP/MCustomer Inspired! 30 mmケージシステム用調整機能付きスリット、M4タップ穴、ミリ規格マイクロメータ(ミリ規格)
¥43,291
Today