OEM 780 nm and 1560 nm Femtosecond Fiber Lasers
- Menlo Systems' figure 9® Technology
- Highly Stable, Easy to Use, Ideal for OEM Integration
- No Control Unit Required
- 780 nm or 1560 nm Output
ELMO-HIGH-POWER
ELMO-780-HIGH-POWER
Please Wait
Illustration of ELMO-HIGH-POWER Generating THz Pulses with 1560 nm fs Pulses
Applications
- Amplifier Seeding
- THz Generation and THz Physics
- Ultrafast Spectroscopy
- Multi-Photon Excitation
- 2-Photon Polymerization and 3D Printing
Femtosecond Fiber Laser Optimized for 3D Printing on Nanoscale
Features
- High Stability
- Low Amplitude and Phase Noise
- All-PM Fiber Solution
- Single Mode-Lock State
- Menlo Systems' figure 9® Technology
- Laser Output in Less than 60 Seconds
- Repetition Rate: 50 - 100 MHz
- Small Footprint, No External Control Unit Required
Menlo Systems’ fiber-based femtosecond laser sources integrate the latest achievements in fiber technology into easy-to-use products. Menlo Systems’ unique figure 9® mode locking technology results in reproducible and long-term stable operation. Both systems are maintenance free and engineered for 24/7 operation.
The ELMO-HIGH-POWER, with its all-fiber design, guarantees excellent stability and low-noise operation. This modular unit can be upgraded to a multicolor and/or multichannel system. The fiber-coupled output includes a PM fiber patch cable up to 30 m long, making the system suitable for THz pulse generation and detection. As a seed source for fiber amplifiers, the oscillator is maintenance free, user installed, and ready to use at the press of a single button.
The ELMO-780-HIGH-POWER, with its modular concept and its compact frequency doubling module, is optimized for OEM integration and maximum versatility. It includes a second-harmonic generation (SHG) unit, which can be detached and handheld to minimize heat dissipation into the optical setup. Dispersion compensation is available upon request to accommodate microscope objectives and additional optical components.
Optional Packages
- VARIO User-Defined Repetition Rate
Factory-Set Value Selectable in the50 - 100 MHz Range - MULTIBRANCH Additional Seed Ports
Seeding of Multiple Amplifiers with Optional Subsequent Frequency Conversion to Cover Multiple Wavelengths
Jason Reeves Menlo Systems |
Feedback? Questions? Need a Quote? Please note that these femtosecond fiber lasers are available directly from Menlo Systems. |
|
United States Phone: +1-973-300-4490 Email: ussales@menlosystems.com |
Outside United States Phone: +49-89-189166-0 Email: sales@menlosystems.com |
Item # | ELMO-780-HIGH-POWER | ELMO-HIGH-POWER |
---|---|---|
Center Wavelength | 780 nm ± 10 nm | 1560 nm ± 30 nm |
Average Output Powera | >140 mW | >180 mW |
Pulse Widtha | <100 fs | <60 fs (45 fs Typ.) |
Output Port | Free Space | Fiber-Coupled |
Polarization | Linear, P-Polarizedb | Linear, PM Fiber |
Dispersion Managementa | Pigtailed SHG Module with up to 0.5 m Optical Fiber Supply | Dispersion can be factory set to achieve short pulses after 0.5 - 30 m of external fiber |
Repetition Ratea | 100 MHz (50 - 100 MHz with VARIO) | |
2nd Fiber-Coupled Seed Port | Yes | |
2nd High-Power Output Port | Available with MULTIBRANCH | |
Operating Voltage | 12 VDC / 2 Ac | |
Power Consumption | 20 VA | |
Operating Temperature | 15 to 35 °C | |
Warm-Up Time | <60 s | |
Laser Head Dimensions / Weight | 195 mm x 95 mm x 75 mm / 2.9 kg (7.7" x 3.7" x 3.0" / 6.4 lbs) |
195 mm x 95 mm x 75 mm / 2.5 kg (7.7" x 3.7" x 3.0" / 5.5 lbs) |
SHG Module Dimensions | 182 mm x 95 mm x 32 mm / 1.0 kg (7.2" x 3.7" x 1.3" / 2.2 lbs) |
- |
パルスレーザ:パワーとエネルギーの計算
パルスレーザからの放射光が、使用するデバイスや用途に適合するかどうかを判断する上で、レーザの製造元から提供されていないパラメータを参照しなければならない場合があります。このような場合、一般には入手可能な情報から必要なパラメータを算出することが可能です。次のような場合を含めて、必要な結果を得るには、ピークパルスパワー、平均パワー、パルスエネルギ、その他の関連するパラメータを必要とすることがあります。
- 生物試料を損傷させないように保護する
- フォトディテクタなどのセンサにダメージを与えることなくパルスレーザ光を測定する
- 物質内で蛍光や非線形効果を得るために励起を行う
パルスレーザ光のパラメータは下の図1および表に示します。参照用として、計算式の一覧を以下に示します。資料を ダウンロードしていただくと、これらの計算式のほかに、パルスレーザ光の概要、異なるパラメータ間の関係性、および計算式の適用例がご覧いただけます。
計算式 | ||||
and | ||||
平均パワーから算出するピークパワー、ピークパワーから算出する平均パワー : | ||||
and | ||||
平均パワーおよびデューティーサイクルから算出するピークパワー*: | ||||
*デューティーサイクル() はレーザのパルス光が放射されている時間の割合です。 |
Click to Enlarge
図1: パルスレーザ光の特性を記述するためのパラメータを、上のグラフと下の表に示します。パルスエネルギ (E)は、パルス曲線の下側の黄色の領域の面積に対応します。このパルスエネルギは斜線で表された領域の面積とも一致します。
パラメータ | シンボル | 単位 | 説明 | ||
---|---|---|---|---|---|
パルスエネルギ | E | ジュール[J] | レーザの1周期中に放射される1パルスの全放射エネルギ。 パルスエネルギはグラフの黄色の領域の面積に等しく、 これは斜線部分の面積とも一致します。 | ||
周期 | Δt | 秒 [s] | 1つのパルスの開始から次のパルスの開始までの時間 | ||
平均パワー | Pavg | ワット[W] | パルスとして放射されたエネルギが、1周期にわたって 均一に広がっていたと仮定したときの、 光パワーの大きさ(光パワー軸上の高さ) | ||
瞬時パワー | P | ワット[W] | 特定の時点における光パワー | ||
ピークパワー | Ppeak | ワット [W] | レーザから出力される最大の瞬時パワー | ||
パルス幅 | 秒 [s] | パルスの開始から終了までの時間。一般的にはパルス形状の 半値全幅(FWHM)を基準にしています。 パルス持続時間とも呼ばれます。 | |||
繰り返し周波数 | frep | ヘルツ [Hz] | パルス光が放射される頻度を周波数で表示した量。 周期とは逆数の関係です。 |
計算例
下記のパルスレーザ光を測定するのに、最大入力ピークパワーが75 mW
のディテクタを使用するのは安全かどうかを計算してみます。
- 平均パワー: 1 mW
- 繰り返し周波数: 85 MHz
- パルス幅: 10 fs
1パルスあたりのエネルギは、
と低いようですが、ピークパワーは、
となります。このピークパワーはディテクタの
最大入力ピークパワーよりも5桁ほど大きく、
従って、上記のパルスレーザ光を測定するのに
このディテクタを使用するのは安全ではありません。
Posted Comments: | |
Hidetoshi Nakanishi
 (posted 2019-06-19 15:07:57.51) (株)SCREENホールディングスの中西英俊です。
価格などの情報も提供いただけると助かります。800nm程度の安価で高出力なfsレーザーを探しています。 YLohia
 (posted 2019-06-19 08:33:09.0) Hello, thank you for contacting Thorlabs. Our Technical Support team from Japan will reach out to you directly. |