OEM 780 nm and 1560 nm Femtosecond Fiber Lasers


  • Menlo Systems' figure 9® Technology
  • Highly Stable, Easy to Use, Ideal for OEM Integration
  • No Control Unit Required
  • 780 nm or 1560 nm Output

ELMO-HIGH-POWER

ELMO-780-HIGH-POWER

Related Items


Please Wait
THz Generation
Illustration of ELMO-HIGH-POWER Generating THz Pulses with 1560 nm fs Pulses

Applications

  • Amplifier Seeding
  • THz Generation and THz Physics
  • Ultrafast Spectroscopy
  • Multi-Photon Excitation
  • 2-Photon Polymerization and 3D Printing
THz Generation
Femtosecond Fiber Laser Optimized for 3D Printing on Nanoscale

Features

  • High Stability
  • Low Amplitude and Phase Noise
  • All-PM Fiber Solution
  • Single Mode-Lock State
  • Menlo Systems' figure 9® Technology
  • Laser Output in Less than 60 Seconds
  • Repetition Rate: 50 - 100 MHz
  • Small Footprint, No External Control Unit Required

Menlo Systems’ fiber-based femtosecond laser sources integrate the latest achievements in fiber technology into easy-to-use products. Menlo Systems’ unique figure 9® mode locking technology results in reproducible and long-term stable operation. Both systems are maintenance free and engineered for 24/7 operation.

The ELMO-HIGH-POWER, with its all-fiber design, guarantees excellent stability and low-noise operation. This modular unit can be upgraded to a multicolor and/or multichannel system. The fiber-coupled output includes a PM fiber patch cable up to 30 m long, making the system suitable for THz pulse generation and detection. As a seed source for fiber amplifiers, the oscillator is maintenance free, user installed, and ready to use at the press of a single button.

The ELMO-780-HIGH-POWER, with its modular concept and its compact frequency doubling module, is optimized for OEM integration and maximum versatility. It includes a second-harmonic generation (SHG) unit, which can be detached and handheld to minimize heat dissipation into the optical setup. Dispersion compensation is available upon request to accommodate microscope objectives and additional optical components.

Optional Packages

  • VARIO User-Defined Repetition Rate
    Factory-Set Value Selectable in the 50 - 100 MHz Range
  • MULTIBRANCH Additional Seed Ports
    Seeding of Multiple Amplifiers with Optional Subsequent Frequency Conversion to Cover Multiple Wavelengths
Jason Reeves
Jason Reeves
Menlo Systems
Feedback? Questions? Need a Quote?

Please note that these femtosecond fiber lasers are available directly from Menlo Systems.
United States
Phone: +1-973-300-4490
Email: ussales@menlosystems.com
Outside United States
Phone: +49-89-189166-0
Email: sales@menlosystems.com
Item # ELMO-780-HIGH-POWER ELMO-HIGH-POWER
Center Wavelength 780 nm ± 10 nm 1560 nm ± 30 nm
Average Output Powera >140 mW >180 mW
Pulse Widtha <100 fs <60 fs (45 fs Typ.)
Output Port Free Space Fiber-Coupled
Polarization Linear, P-Polarizedb Linear, PM Fiber
Dispersion Managementa Pigtailed SHG Module with up to 0.5 m Optical Fiber Supply Dispersion can be factory set to achieve short pulses after 0.5 - 30 m of external fiber
Repetition Ratea 100 MHz (50 - 100 MHz with VARIO)
2nd Fiber-Coupled Seed Port Yes
2nd High-Power Output Port Available with MULTIBRANCH
Operating Voltage 12 VDC / 2 Ac
Power Consumption 20 VA
Operating Temperature 15 to 35 °C
Warm-Up Time <60 s
Laser Head Dimensions / Weight 195 mm x 95 mm x 75 mm / 2.9 kg
(7.7" x 3.7" x 3.0" / 6.4 lbs)
195 mm x 95 mm x 75 mm / 2.5 kg
(7.7" x 3.7" x 3.0" / 5.5 lbs)
SHG Module Dimensions 182 mm x 95 mm x 32 mm / 1.0 kg
(7.2" x 3.7" x 1.3" / 2.2 lbs)
-
  • The handheld SHG module can also be mounted for s-polarization.
  • Please inquire with Menlo Systems for your specific combinations of average power, pulse duration, repetition rate, and external fiber length.
  • External Power Supply for 110/115/230 VAC Included

パルスレーザ:パワーとエネルギーの計算

パルスレーザからの放射光が、使用するデバイスや用途に適合するかどうかを判断する上で、レーザの製造元から提供されていないパラメータを参照しなければならない場合があります。このような場合、一般には入手可能な情報から必要なパラメータを算出することが可能です。次のような場合を含めて、必要な結果を得るには、ピークパルスパワー、平均パワー、パルスエネルギ、その他の関連するパラメータを必要とすることがあります。

  • 生物試料を損傷させないように保護する
  • フォトディテクタなどのセンサにダメージを与えることなくパルスレーザ光を測定する
  • 物質内で蛍光や非線形効果を得るために励起を行う

パルスレーザ光のパラメータは下の図1および表に示します。参照用として、計算式の一覧を以下に示します。資料を ダウンロードしていただくと、これらの計算式のほかに、パルスレーザ光の概要、異なるパラメータ間の関係性、および計算式の適用例がご覧いただけます。

 

計算式

周期と繰り返し周波数は逆数の関係:   and 
平均パワーから算出するパルスエネルギ:      
パルスエネルギーから算出する平均パワー:       
パルスエネルギーから概算するピークパルスパワー:           

平均パワーから算出するピークパワー、ピークパワーから算出する平均パワー :
 and
平均パワーおよびデューティーサイクルから算出するピークパワー*:
*デューティーサイクル() はレーザのパルス光が放射されている時間の割合です。
Pulsed Laser Emission Parameters
Click to Enlarge

図1: パルスレーザ光の特性を記述するためのパラメータを、上のグラフと下の表に示します。パルスエネルギ (E)は、パルス曲線の下側の黄色の領域の面積に対応します。このパルスエネルギは斜線で表された領域の面積とも一致します。

パラメータシンボル単位説明
パルスエネルギEジュール[J]レーザの1周期中に放射される1パルスの全放射エネルギ。
パルスエネルギはグラフの黄色の領域の面積に等しく、
これは斜線部分の面積とも一致します。
周期Δt 秒 [s] 1つのパルスの開始から次のパルスの開始までの時間
平均パワーPavgワット[W]パルスとして放射されたエネルギが、1周期にわたって
均一に広がっていたと仮定したときの、
光パワーの大きさ(光パワー軸上の高さ)
瞬時パワーPワット[W]特定の時点における光パワー
ピークパワーPpeakワット [W]レーザから出力される最大の瞬時パワー
パルス幅秒 [s]パルスの開始から終了までの時間。一般的にはパルス形状の
半値全幅(FWHM)を基準にしています。
パルス持続時間とも呼ばれます。
繰り返し周波数 frepヘルツ [Hz]パルス光が放射される頻度を周波数で表示した量。
周期とは逆数の関係です。

計算例

下記のパルスレーザ光を測定するのに、最大入力ピークパワーが75 mW 
のディテクタを使用するのは安全かどうかを計算してみます。

  • 平均パワー: 1 mW
  • 繰り返し周波数: 85 MHz
  • パルス幅: 10 fs

1パルスあたりのエネルギは、

と低いようですが、ピークパワーは、

となります。このピークパワーはディテクタの
最大入力ピークパワーよりも5桁ほど大きく、
従って、上記のパルスレーザ光を測定するのに
このディテクタを使用するのは安全ではありません


Posted Comments:
Hidetoshi Nakanishi  (posted 2019-06-19 15:07:57.51)
(株)SCREENホールディングスの中西英俊です。 価格などの情報も提供いただけると助かります。800nm程度の安価で高出力なfsレーザーを探しています。
YLohia  (posted 2019-06-19 08:33:09.0)
Hello, thank you for contacting Thorlabs. Our Technical Support team from Japan will reach out to you directly.
Back to Top

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ELMO-780-HIGH-POWER Support Documentation
ELMO-780-HIGH-POWEROEM Femtosecond Fiber Laser, 780 nm, >140 mW, 100 MHz
Request
Menlo Lead Time
ELMO-HIGH-POWER Support Documentation
ELMO-HIGH-POWEROEM Femtosecond Fiber Laser, 1560 nm, >180 mW, 100 MHz
Request
Menlo Lead Time