1軸フレクシャー移動ステージ、移動量1.5 mm、手動-ピエゾハイブリッド型


  • Flexure Design - No Friction or Sticking
  • Thumbscrew Adjuster and 25 µm Piezo Actuator
  • Mounting Plate and Angle Bracket Available

NF15P1 Adapter
with NF15AP25
Stage

NF15AP25

NF15P2 Adapter with Two NF15AP25 Stages

Save 10% with
Stage and Controller Bundle

KPZNF15

NF15AP25 with KPZ101 Controller

Related Items


Please Wait
Key Specificationsa
Item #NF15AP25(/M)
Manual Travel1.5 mm (0.06")
Adjuster Resolution0.25 mm/Revolution
Load CapacityHorizontal: 0.5 kg (1.1 lbs)
Vertical: 0.25 kg (0.55 lbs)
Cross Talk1.0 µm (Max)
Piezo Travel25 µm
Piezo Resolution
(Theoretical)
0.76 nm
Piezo Voltage0 - 75 V
  • 対応コントローラなどの詳細な情報については「仕様」タブをご覧ください。
Single-Axis Flexure Stage Selection Guide
1.5 mm Travel
5 mm Travel

特長

  • 手動による移動範囲: 1.5 mm
  • ピエゾ移動範囲: 25 µm
  • 30.0 mm x 30.0 mm、厚さ12.5 mm のコンパクトなサイズ
  • 別売りのベースプレートと直角ブラケットによりXYZ構築が可能
  • 対応するピエゾコントローラ: KPZ101BPC301BPC303MDT694BMPZ601

当社のフレクシャーステージNanoFlex™は、摩擦のない移動を可能にする小型ステージです。これらの直線移動ステージ(リニアステージ)で採用されているフレクシャ機構は、従来のベアリングを使ったステージと比べて位置決めと分解能に優れた摩擦のない構造です。フレクシャ機構による移動は、取付プラットフォームに取り付けられた結合部の弾性変形(たわみ)により行なわれます。この移動ステージでは、手動での移動範囲が1.5 mmでピエゾによる移動範囲は25 μmです(手動での移動量5 mmのステージについては「手動ステージ」タブをご参照ください)。ピエゾは、SMCコネクタによって接続されます。移動量が1.5 mmの手動ステージについては「手動ステージ」タブをご覧ください。

NanoFlex™フレクシャーステージの最大許容荷重は0.5 kgで、多くの実験および組み込み用途(OEM用途)に適しています。モジュール式設計により、複数のステージを多軸構成で積み重ねることが可能です。ステージNF15AP25/Mを3つと直角ブラケットNF15P2/Mを1つ使ってXYZ構成を構築することができます。

Item #NF15AP25(/M)
Manual Travel Range1.5 mm (0.06") 
Thumbscrew Resolution0.25 mm per Revolution
Load CapacityHorizontal: 0.5 kg (1.1 lbs)
Vertical: 0.25 kg (0.55 lbs)
Maximum Cross Talk1.0 µm
Piezo Travel25 µm
Piezo Resolution
(Theoretical)
0.76 nm
Piezo Voltage0 - 75 V
Piezo Capacitance5 µF ± 30% (at 1 V, 1 kHz)
Piezo ConnectorSMC
Piezo Cable Length3 m (9.8 ft)
Compatible Piezo ControllersKPZ101, BPC301, BPC303, MDT694B, MPZ601

ピエゾ素子接続

SMCオス型

SMC Male

0 ~75 V

 

これらの仕様値はステージが1軸構成の場合の数値です。移動ステージが積み重ねられ多軸構成で使用されるときは、位置システムの分解能がコサインエラーと アッベエラー(クロストーク)によって劣化します。位置エラーの1つであるコサインエラーは、積み重ねられたステージが相対的に直交の位置関係にないこと が原因で生じます。一方、アッベエラーは、積み重ねられたステージが有限の高さを持つ事に起因します。この高さのエラーは、ベースステージのあらゆる角度 ロール、ピッチまたはヨーのエラーにつながります。このようなエラーは、各自由度が平行連結機構(Parallel Linkage)により制御されている多軸ステージを使う事により、避ける事ができます。当社の手動および自動の装置構成のラインナップから様々な種類3、4、5、6軸ステージをお選びいただけます。3軸のソリューションをご検討の場合は、当社の3軸フレクシャーステージをお勧めしております。

NF15AP25 SMC

ピエゾ素子接続

SMC オス型

SMC Male

0~75 V


Posted Comments:
Andrea Sardella  (posted 2024-03-02 16:04:19.423)
Could you provide me a drawing with the travel direction for the piezo? I'm not sure I'm using in the correct way Thanks
spolineni  (posted 2024-03-07 11:22:39.0)
Thank you for your query. The travel direction is parallel with the advancement direction of the thumb screw adjuster. Nonetheless, I will contact you to provide a drawing for a more detailed understanding.
Shay Keren-Zur  (posted 2023-06-13 20:57:09.98)
Hi, I recently purchased the KPZNF15 stage bundle. I realize that the control parameter is voltage, but I cannot find any reference regarding to the relation between the voltage value and the translation of the stage. I'd be happy if you could support me on this matter. Thanks, Shay
do'neill  (posted 2023-06-15 07:59:49.0)
Response from Daniel at Thorlabs. As there is no feedback for this stage it is not possible to equate a voltage to a position due to non linearity and more importantly hysteresis. It is possible to estimate the position as a linear relationship with the total travel range but to accurately know the position you will need to use some external way of measuring the position or choose a closed loop piezo stage
Ben Carey  (posted 2023-03-30 07:58:46.413)
Hi I'm interested in using an NFP15AP25 to move a mirror. I already own an MDT694B piezo controller. I see the KPZ101 is the recommended driver for the stage. Is there any advantage to using the KPZ101 or will I be fine with the MDT694B?
do'neill  (posted 2023-03-31 11:07:11.0)
Response from Daniel at Thorlabs. The compatible controllers for the NF15AP25 are the KPZ101, BPC301, BPC303, MDT694B, and MPZ601. The is no issue in using the MDT694B to control this stage. I will reach out to you to discuss your application.
Xu yan  (posted 2021-10-21 06:00:10.767)
Hi, I recently bought an NF15AP25/M piezo stage with an NF15P1 adapter and a KPZ101 K-cube controller. I fixed a mirror on the piezoelectric stage as an arm of the interferometer, but the mirror is very easy to shake and cause the interference fringe to shake. Is there any way to solve it? In addition, I use KPZ101 for every 0.01V increase in voltage and the actual displacement is about 1.5nm instead of 0.76nm. What is the reason?
YLohia  (posted 2021-12-23 10:44:41.0)
Hello, thank you for contacting Thorlabs. We are sorry to hear that you're having issues with this device. We have reached out to you directly to troubleshoot further.
user  (posted 2021-08-05 04:51:47.107)
Hi, I recently bought an NF15AP25/M piezo stage with an NF15P1 adapter and a KPZ101 K-cube controller. When I go from 0 to 75V using the K-cube controller, the piezo stage moves by approximately 15 µm instead of the 25 µm expected. Do you know where the problem may come from?
DJayasuriya  (posted 2021-08-05 09:30:16.0)
Thank you for your inquiry. We will get in touch with you directly to resolve your issue.
Matthias Steiner  (posted 2020-08-05 07:18:21.17)
Hi, can the thumbscrew adjuster be replaced with a lock-able adjuster?
cwright  (posted 2020-08-10 10:12:03.0)
Response from Charles at Thorlabs: Hello Matthias and thank you for contacting us. Unfortunately this is not something we can offer as a special request at this time but I will reach out to you to discuss how you may be able to add similar functionality.
loo  (posted 2016-03-09 17:13:11.81)
Nothing seem attached from beneath the top plate of the flexure stage, beside the two screws to the square frame. So, is it possible to unscrew the top plate of the stage to have it machined, and then put it back together without damage? Or even unscrew it and replace it completely with a custom top plate of ours?
besembeson  (posted 2016-03-10 03:22:28.0)
Response from Bweh at Thorlabs USA: No that is not possible. The top plate is also connected to the flexure mechanism inside. Removing that top plate could also cause misalignment so you are better off having a custom adapter plate to use on the top plate.
gesuele  (posted 2014-01-09 05:15:33.373)
I am wondering if the NF15AP25 can be used as a raster scanning stage (two of them for XY scanning). What would be the maximum scanning rate?
msoulby  (posted 2014-01-09 05:39:13.0)
Response from Mike at Thorlabs: Yes, using two of the NF15AP25 stages in an XY configuration can be programed to perform a raster scan. To do this you would need to use a programming environment such as Labview or Matlab using the ActiveX methods provided with our APT software. I have contacted you directly with an example of a 2D piezo raster scan LabView .VI and a guide on how to use our APT software in Labview. Regarding the maximum scan rate this depends on the capacitance of the piezo element and the maximum output current of the piezo driver. Using the TPZ001 piezo controller, which has an output of 7.5mA a full scan from 0-75V (which represents zero to maximum piezo displacement of 0-25um), will give a maximum bandwidth of about 6Hz, for a sinusoidal input. Using the BPC301 which has an output drive current of 0.5A a maximum sinusoidal bandwidth for this piezo stage will be about 420Hz, full details can be found on the ‘Piezo Bandwidth’ tab on the TPZ001 product page.
cwilson  (posted 2013-08-18 07:32:08.187)
Leaving Test Feedback after replication reset
bdada  (posted 2011-06-06 12:49:00.0)
Response from Buki at Thorlabs: Thank you for using our Feedback Tool. Unfortunately there is no direct solution for attaching the MS3/M to the NF15AP25/M. You can try other configurations like using the NF15P2 angle bracket to combine two NF15AP25 as shown on the webpage below: http://www.thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=787&pn=NF15P2#787 Please contact us at TechSupport@thorlabs.com if you want to discuss this matter further.
stuchris  (posted 2011-06-03 12:48:37.0)
Hi, is there any way I can attach the NF15AP25/M to the MS3/M? Thanks.
user  (posted 2010-06-01 18:43:51.0)
Response from Javier at Thorlabs to mabashin: The capacitance of the piezo used in the NF15AP25 is 5 uF +/- 30% (@1V, 1kHz)
mabashin  (posted 2010-06-01 17:37:50.0)
What is the capacitance of the piezo on the NF15AP25?

手動リニアステージ

手動の移動ステージとして、最大移動量が6 mm以下から50 mmまでのステージをご用意しています。ステージの多くはXY軸やXYZ軸などの多軸構成での注文が可能です。ファイバ結合用としては、多軸ステージのページをご覧ください。標準の手動ステージを用いるよりも精密な調整が可能です。直線移動ステージのほかにも、回転ステージピッチ&ヨープラットフォームおよびゴニオメータもご用意しております。また、DCサーボモータ、ステッピングモータ、またはダイレクトドライブ技術を用いた電動移動ステージもご用意しています。

クロスローラーベアリングステージ

こちらの直線移動ステージの移動機構には、精密移動、高耐荷重、小角度偏差といった特性を有するクロスローラーベアリングが用いられています。LNRシリーズステージの本体はスチール製、LX、XRNおよびXRシリーズステージの本体はアルミニウム製です。当社ではクロスローラーベアリングを用いた垂直移動ステージもご用意しております(下記参照)。

Crossed-Roller Bearing Stages
Product FamilyLNR Series 25 mm Stages LX Series 25 mm
Stages
XRN Series 25 mm StagesXR Series 25 mm Stages XR Series 50 mm Stages LNR Series 50.8 mm Stages
Click Photo
to Enlarge
Travel25 mm (0.98")25 mm (0.98")25 mm (0.98")25 mm (0.98")50 mm (1.97")50.8 mm (2")
Drive TypeMultipleMicrometerMicrometerMicrometerMicrometerMultiple
Platform Size2.34" x 2.36"
(59.4 mm x 60.0 mm)
2.56" x 2.56"
(65.0 mm x 65.0 mm)
2.00" x 3.35"
(50.7 mm x 85.0 mm)
2.98" x 4.33"
(75.7 mm x 110.0 mm)
2.98" x 5.51"
(75.7 mm x 140.0 mm)
3.94" x 3.94"
(100.0 mm x 100.0 mm)
Possible Axis
Configurations
X, XZ, XY, XYZX, XY, XZ, YZ, XYZX, Y, Z, XY, XZ, YZ, XYZX, Y, Z, XY, XZ, YZ, XYZX, Y, Z, XY, XZ, YZ, XYZX, XY, XYZ
Additional Details

ボールベアリングステージ

こちらの移動ステージでは、精密移動と長寿命を実現するために、硬化スチール製リニアベアリングが用いられています。様々なアクチュエータが付いた製品や、1軸ステージや予め多軸ステージとして構築された製品をご用意しております。

Ball Bearing Stages
Product FamilyMS Series 1/4" StagesT12 Series 1/2" StagesMT Series 1/2" StagesPT Series 1" StagesLT Series 2" Stages
Click Photo to Enlarge
Travel1/4" (6.4 mm)1/2" (12.7 mm)1/2" (12.7 mm)1" (25.4 mm)2" (50 mm)
Drive TypeMultipleThumbscrewMultipleMultipleDifferential Micrometer
Platform Size1.17" x 1.17"
(29.7 mm x 29.7 mm)
0.76" x 0.81"
(19.3 mm x 20.6 mm)
2.40" x 2.41"
(61.0 mm x 61.2 mm)
3.00" x 4.00"
(76.2 mm x 101.6 mm)
3.75" x 3.75"
(95.3 mm x 95.3 mm)
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZX, XY, XYZX, XY, XYZX, XY, XYZ
Additional Details

アリ溝式ステージ

これらの小型ステージの移動機構にはアリ溝と送りネジが組み込まれています。一般的な移動制御用に適したステージです。

Dovetail Stages
Product FamilyDT Series 1/2" StagesDTS Series 1" Stages
(Vacuum-Compatible Version Available)
DTS Series 2" Stage
Click Photo to Enlarge
Travel1/2" (12.7 mm)1" (25 mm)2" (50 mm)
Drive TypeThumbscrewThumbscrewThumbscrew
Platform Size1.00" x 1.00" (25.4 mm x 25.4 mm)2.68" x 2.95" (68.0 mm 75.0 mm)2.68" x 3.74" (68.0 mm x 95.0 mm)
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZaX, XY, XYZ
Additional Details
  • The DTSA03 anodized angle bracket designed for XYZ configurations may also be used with the DTS25V(/M) vacuum-compatible stages; however, the DTSA03 is not vacuum-compatible.
  • The 1" (25 mm) travel DTS Series features an anodized DTS25(/M) stage and a DTS25V(/M) stage that is vacuum-compatible down to 10-6 Torr.

フレクシャーステージ

移動ステージNanoflex™には摩擦の無いフレクシャー機構が用いられており、ベアリングを用いた同様のステージと比較して位置決め性能と分解能が向上しています。ステージの移動は、取付けプラットフォームに取り付けられた連結部の弾性変形(たわみ)によって実現されています。多くのモデルには、微細な位置調整用にピエゾアクチュエータも付属します。 

Flexure Stages
Product FamilyNanoflex™ 1.5 mm StageNanoflex™ 5 mm Stages
Click Photo to Enlarge
Travel1.5 mm (0.06") + 25 µm Piezo5 mm (0.20")5 mm (0.20") + 20 µm Piezo
Drive TypeThumbscrew and Piezo ActuatorDifferential MicrometerDifferential Micrometer and
Open-Loop Piezo Actuator
Differential Micrometer and
Closed-Loop Piezo Actuator
Platform Size1.18" x 1.18" (30.0 mm x 30.0 mm)2.95" x 2.95" (75.0 mm x 75.0 mm)
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZX, XY, XYZX, XY, XYZ
Additional Details

垂直移動ステージ

当社では精密移動用のクロスローラーベアリングを用いた垂直移動ステージや、高荷重用の長距離垂直移動ステージもご用意しております。 

Vertical Stages
Product FamilyXRN Series 9 mm Vertical StageXR Series 14 mm Vertical StageMVS Series 1/2" Vertical StageMVS Series 1" Vertical Stage VAP Series 4" Vertical StageVAP Series 10" Vertical Stage
Click Photo to Enlarge
Travel9.0 mm (0.35")14.0 mm (0.55")1/2" (13.0 mm)1" (25.0 mm)4" (101.6 mm)10" (254 mm)
Drive TypeWorm-Gear Driven Lift ScrewMicrometerAdjuster Knob and Coarse Manual Positioning
Platform Size2.00" x 2.00"
(50.7 mm x 50.7 mm)
2.98" x 2.98"
(75.7 mm x 75.7 mm)
2.36" x 2.36" (60.0 mm x 60.0 mm)3.00" x 6.00" (76.2 mm 152.4 mm)
Additional Details

電動リニアステージ

電動の直線移動ステージとしては、ピエゾ駆動の20 µm移動ステージからダイレクトドライブ方式の600 mm移動ステージまで、様々な最大移動量の製品をご用意しております。ステージの多くは、それらを用いてXY軸やXYZ軸などの多軸ステージを構築することができます。ファイバ結合用としては、多軸ステージのページをご覧ください。標準の電動ステージを用いるよりも精密な調整が可能です。直線移動ステージのほかに、電動の回転ステージおよびゴニオステージもご用意しております。また手動移動ステージもございます。

ピエゾステージ

これらのステージでは、様々な駆動機構にピエゾ素子が組み込まれています。ステージORIC®シリーズでは、「スティック-スリップ」と呼ばれる摩擦特性を利用したピエゾ慣性アクチュエータが用いられており、それにより長い移動距離が得られています。移動ステージNanoflex™シリーズは、手動アクチュエータに加えて標準的なピエゾアクチュエータが用いられています。ステージElliptec®シリーズでは共振ピエゾモータが用いられており、共振に伴うモータ先端の楕円形の動きで可動プラットフォームを押したり引いたりします。Z軸ステージLPS710E/Mにはピエゾ移動に対する機械的な増幅機構が組み込まれており、またそれに適したコントローラが付属しています。

Piezoelectric Stages
Product FamilyORIC®
PD2 Open-Loop
5 mm Stage
ORIC®
PDX2 Closed-Loop
5 mm Stage
ORIC®
PD1 Open-Loop
20 mm Stage
ORIC®
PD1D Open-Loop
20 mm
Monolithic XY Stage
ORIC®
PDX1 Closed-Loop
20 mm Stage
ORIC®
PD3 Open-Loop
50 mm Stage
Click Photo
to Enlarge
Travel5 mm20 mm50 mm
Maximum Velocity10 mm/sa8 mm/s (Typ.)b3 mm/sc20 mm/sb10 mm/sa
Drive TypePiezoelectric Inertia Drive
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZXY, XYZX, XY, XYZX, XY, XYZ
Mounting
Surface Size
13 mm x 13 mm30 mm x 30 mm80 mm x 30 mm
Additional Details
  • ベンチトップ型コントローラPDXCおよびPDXC2使用時。コントローラK-Cube KIM001またはKIM101で制御したときの性能については、移動ステージPD2/MまたはPD3/Mの「仕様」タブをご覧ください。
  • ベンチトップ型コントローラPDXCおよびPDXC2使用時
  • コントローラK-Cube KIM101使用時
Piezoelectric Stages
Product FamilyNanoflex™
20 µm Stage
with 5 mm Actuator
Nanoflex™
25 µm Stage
with 1.5 mm Actuator
Elliptec® 28 mm Stage Elliptec® 60 mm StageLPS710E 1.1 mm Vertical Stage
Click Photo
to Enlarge
Travel20 µm + 5 mm Manual25 µm + 1.5 mm Manual28 mm60.0 mm1.1 mm
Maximum Velocity-180 mm/s90 mm/s-
Drive TypePiezo with Manual ActuatorResonant Piezoelectric MotorAmplified Piezo
Possible Axis ConfigurationsX, XY, XYZXZ
Mounting Surface Size75 mm x 75 mm30 mm x 30 mm15 mm x 15 mm21 mm x 21 mm
Additional Details

ステッピングモーターステージ

こちらの移動ステージは脱着型あるいは内蔵型のステッピングモータを用いており、また300 mmまでの長い移動量が可能です。ステージの多くは多軸構成(PLSXY)や、多軸ステージ(PLSX、LNRシリーズ、NRTシリーズ、LTSシリーズ)への組み込みが可能です。ステージMLJ150/Mは高荷重にも対応する垂直移動ステージです。

Stepper Motor Stages
Product FamilyPLSX with and without PLST(/M) Top Plate
1" Stage
PLSXY with and without PLST(/M) Top Plate
1" Stage
LNR Series
25 mm Stage
LNR Series
50 mm Stage
Click Photo
to Enlarge
Travel1"25 mm50 mm
Maximum Velocity7.0 mm/s2.0 mm/s50 mm/s
Possible Axis
Configurations
X, XYX, XY, XYZX, XY, XYZ
Mounting
Surface Size
3" x 3"60 mm x 60 mm100 mm x 100 mm
Additional Details

Stepper Motor Stages
Product FamilyNRT Series
100 mm Stage
NRT Series
150 mm Stage
LTS Series
150 mm Stage
LTS Series
300 mm Stage
MLJ250
50 mm Vertical Stage
Click Photo
to Enlarge
Travel100 mm150 mm150 mm300 mm50 mm
Maximum Velocity30 mm/s50 mm/s3.0 mm/s
Possible Axis
Configurations
X, XY, XYZX, XY, XYZZ
Mounting
Surface Size
84 mm x 84 mm100 mm x 90 mm148 mm x 131 mm
Additional Details

DCサーボモーターステージ

脱着型あるいは内蔵型のDCサーボモータを用いた直線移動ステージをご用意しております。これらのステージは薄型で、多軸ステージの構築が可能です。

DC Servo Motor Stages
Product FamilyMT Series
12 mm Stages
PT Series
25 mm Stages
MTS Series
25 mm Stage
MTS Series
50 mm Stage
Click Photo
to Enlarge
Travel12 mm25 mm25 mm50 mm
Maximum Velocity2.6 mm/s2.4 mm/s
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZ
Mounting
Surface Size
61 mm x 61 mm101.6 mm x 76.2 mm43 mm x 43 mm
Additional Details
DC Servo Motor Stages
Product FamilyM30 Series
30 mm Stage
M30 Series
30 mm Monolithic
XY Stage
M150 Series
150 mm XY Stage
KVS30
30 mm Vertical Stage
Click Photo
to Enlarge
Travel30 mm150 mm30 mm
Maximum Velocity2.4 mm/sX-Axis: 170 mm/s
Y-Axis: 230 mm/s
8.0 mm/s
Possible Axis ConfigurationsX, ZXY, XZXYZ
Mounting
Surface Size
115 mm x 115 mm272.4 mm x 272.4 mm 116.2 mm x 116.2 mm
Additional Details

ダイレクトドライブステージ

こちらの薄型ステージにはブラシレスDCサーボモータが内蔵されており、バックラッシュの無い高速移動が可能です。電源が入ってないときは、ステージのプラットフォームにはほとんど慣性が無く、実質的にフリーラン状態になります。そのため電源が入ってないときにステージのプラットフォームが定位置に留まる必要のある用途には適していません。これらのステージを垂直方向に取付けることは推奨しません。

Direct Drive Stages
Product FamilyDDS Series
50 mm Stage
DDS Series
100 mm Stage
DDS Series
220 mm Stage
DDS Series
300 mm Stage
DDS Series
600 mm Stage
Click Photo
to Enlarge
Travel50 mm100 mm220 mm300 mm600 mm
Maximum Velocity500 mm/s300 mm/s400 mm/s400 mm/s
Possible Axis ConfigurationsX, XYX, XYXX
Mounting Surface Size60 mm x 52 mm88 mm x 88 mm120 mm x 120 mm
Additional Details
Back to Top

1軸フレクシャーステージ、移動量1.5 mm、手動-ピエゾハイブリッド型

このステージはつまみネジによる手動調整とピエゾアクチュエータによる超微調整機能を有するハイブリッド型移動ステージです。移動ステージNF15AP25/Mは、研究室や組み込み用途(OEM用途)に幅広くご使用いただけます。NF15AP25/Mには3つのM2キャップスクリュ、アレンキー、長さ3 mのSMC(オス型)-SMC(オス型)ケーブルが付属しています。

使用可能なコントローラなどの詳細については、上の「仕様」タブをご覧ください。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
NF15AP25 Support Documentation
NF15AP25NanoFlex™1軸ステージ(移動量1.5 mm)、25 µmピエゾアクチュエータ付き(インチ規格)
¥120,593
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
NF15AP25/M Support Documentation
NF15AP25/MNanoFlex™1軸ステージ(移動量1.5 mm)、25 µmピエゾアクチュエータ付き(ミリ規格)
¥120,593
Today
Back to Top

取付けアダプタ

  • XY、XZ、およびXYZ構成のステージを構築
  • 垂直取付け用の直角ブラケット

NF15P1/MおよびNF15P2/MはNF15/Mシリーズの移動ステージ用に設計されたアダプタープレートです。NF15P1/Mは、側面に光学ブレッドボードへの取付け用スロットが付いているNF15/Mシリーズの移動ステージ用に特別に設計されたベースプレートです。このベースは、ステージ中央の標準的なザグリ穴が塞がれてしまうXYおよびXYZの多軸構成にご使用いただけます。

NF15P2/Mは、NF15シリーズのステージを垂直に取り付けられる直角ブラケットです。一部のXY構成、およびすべてのXYZ構成ではこの直角ブラケットが必要になります。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
NF15P1 Support Documentation
NF15P1フレクシャーステージNF15AP25用取付けプレート(インチ規格)
¥7,975
7-10 Days
NF15P2 Support Documentation
NF15P2フレクシャーステージNF15AP25用直角ブラケット(インチ規格)
¥7,975
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
NF15P1/M Support Documentation
NF15P1/MフレクシャーステージNF15AP25/M用取付けプレート(ミリ規格)
¥7,975
7-10 Days
NF15P2/M Support Documentation
NF15P2/MフレクシャーステージNF15AP25/M用直角ブラケット(ミリ規格)
¥7,975
7-10 Days