30°/60°および45°の角度付き取付けプレート


  • Mount Optomechanics or Breadboards at 30°, 45°, or 60°
  • 1/4" (M6) Slotted, 1/4" (M6) Counterbored, and 1/4"-20 (M6)
    Tapped Holes Provide Flexible Mounting Options

AP30

30°/60° Mounting Plate

AP45

45° Mounting Plate

Breadboard Mounted at 45° Using Two AP45 Mounting Plates

Related Items


Please Wait

AP30(/M)のタップ穴、ザグリ穴スロットおよびザグリ穴の位置をこちらの動画でご覧いただけます。

特長

  • 単体アルミニウムの切り出し構造で優れた剛性
  • 三角形の断面が頑丈で安定した取付けを実現
  • 角度公差: ±30 arcmin
  • 平坦度: 0.025 mm

角度付き取付プレートAP30/MおよびAP45/Mは、しっかりとした3次元のオプトメカニクスアセンブリを構築する際に適しています。角度公差が±30 arcminの単体切り出し構造で、光学ブレッドボードや光学部品の精密な取付けが可能です。

角度付き取付けプレートAP30/Mの取付け面は、113.9 mm x 73.2 mmで、30°および60°の角度が付いています。取付け面には長さ76.2 mmのM6ザグリ穴スロットが2個、M6ザグリ穴が3個、M6タップ穴が12個開いており、多様な取り付けが可能になっています。設置時斜面角度30°の時の底面には、50.8 mmのM6ザグリ穴スロットが2個、 M6タップ穴が8個、取付け面のザグリ穴へのアクセスホールが3個開いています。設置時斜面角度60°の時の底面には、長さ25.4 mmのM6ザグリ穴スロットが2個、M6タップ穴が7個開いています。さらに、この面と取付け面の間にある小さな平面にはM6タップ穴が5個開いています。

角度付き取付けプレートAP45/Mの取付け面は、78.8 mm x 73.2 mmで、長さ25.4 mmのM6ザグリ穴スロットが2個、M6ザグリ穴が2個、M6タップ穴が7個開いています 底面には長さ25.4 mmのM6ザグリ穴スロットが2個、取付け面のザグリ穴へのアクセスホールが1個、そしてもう1つの面(上の取付け例の写真参照)にはM6タップ穴が5個とザグリ穴へのアクセスホールが1個開いています。

当社では直角ブラケット角度調整プレートも取り扱っております。


Posted Comments:
s.m.walker  (posted 2018-04-11 16:18:19.497)
For the AP45/M is there any reason why the slots on the hypotenuse can't be extended so that they are >50mm long? This would allow a component with 50mm spaced holes to be mounted in the center.
llamb  (posted 2018-04-13 08:27:22.0)
Hello, thank you for your feedback. Currently the AP45(/M) does not have the clearance space on the interior of its hypotenuse to allow >50 mm long slots to go all the way through. I will add this suggestion to our internal product forum and reach out to you directly for a possible customized solution.
walter  (posted 2018-03-23 15:31:11.153)
For the AP30/M on the diagonal side (surface A in drawing) a fifth pair of M6x1.0 Mounting Holes would be practical. With these holes it would be possible to fix a XT95P3 mount for connecting an XT95 profile. I have a setup with an XT95 profile standing vertical on a breadboard and I want to mount another XT95 at an angle of 30° to this profile to make the setup more stable.
llamb  (posted 2018-03-31 10:30:49.0)
Hello, thank you for your feedback. I will add this idea to our internal product forum and reach out to you directly to discuss a possible customization in the meantime.
valerios  (posted 2014-03-03 00:39:54.72)
What is the maximum weight that can be loaded on the AP45 when setting it to 45 degree? If not would it be possible to have a larger version of the AP45 (~20 cm x 20 cm)? At which price? Regards, Valerio
cdaly  (posted 2014-03-25 05:00:04.0)
Response from Chris at Thorlabs: Thank you for your inquiry. I'm afraid we do not have a load spec for this bracket. I've run some simulations and should be able to take quite a bit, but these are not number we would feel comfortable posting as they are not proven. I will contact you directly to discuss the load which you would like to use. Hopefully we can give you a decisive answer on whether or not the bracket is appropriate for your needs.
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AP30 Support Documentation
AP3030°/60° 角度付き取付けプレート、1/4"-20ネジ対応(インチ規格)
¥20,264
7-10 Days
AP45 Support Documentation
AP4545° 角度付き取付けプレート、1/4"-20ネジ対応(インチ規格)
¥12,696
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AP30/M Support Documentation
AP30/M30°/60° 角度付き取付けプレート、M6 x 1.0ネジ対応(ミリ規格)
¥20,264
Today
AP45/M Support Documentation
AP45/M45°角度付き取付けプレート、 M6 x 1.0ネジ対応(ミリ規格)
¥12,696
Today
Last Edited: Aug 21, 2013 Author: Dave Gardner