大面積回転ブレッドボード


  • Removable Center Allows
    Rotation Around Components
  • Simple, Hand-Operated
    Positioning

RBB12A

Position Locking
Screw

Position Locking
Screw

RBBA1

SM1-Threaded Center Insert

Removable Center Portion
Measuring Ø3.58" (Ø91.0 mm)

Related Items


Please Wait
Rotating Breadboard
Click for Details
RBB6A(RBB150A/M)とSM1ネジ付きセンターインサートRBBA1(/M)(別売り)

特長

  • 360°連続回転(手動) 
  • サイズ:Ø150 mm、Ø300 mm、Ø450 mm
  • 標準的なM6(25 mmピッチ) 穴パターン
  • 厚さ:12.7 mm
  • 回転位置ロック機構付き
  • 黒色アルマイト加工 

こちらの大型回転ブレッドボードは、M6 x 1.0穴パターンでØ150 mm、Ø300 mm、Ø450 mmの3種類のサイズでご用意しております。穴間隔は25 mmです。ブレッドボードの厚さは、当社の標準的なアルミニウム製ブレッドボードと同じ12.7 mmです。これらのブレッドボードは光学アセンブリで角度の粗調整が必要な用途にお使いいただけます。ブレッドボードのØ91 mmの中心部は取り外し可能なため、部品を中心に取り付け、その周りでブレッドボードを回転させることも可能です(右の写真参照)。回転面のエッジ周りには1°単位の目盛がレーザ刻印されています。位置決めはプラットフォームを手動で回転させることにより行います。

ブレッドボードにはエッジ部分のアリ溝と、固定式キネマティックマウントが3つ付いています。これらのマウントは、周囲どの位置にも固定可能で、固定には付属の2.5 mm六角レンチを使用します。マウントには、スロット穴も付いているので、位置が調整可能なだけではなく、ブレッドボードが光学テーブルや作業面などに固定されたときに柔軟な取り付けが可能です。右の写真は、RBB12A(RBB300A/M)を使用して構築したプリズム分光器です。このセットアップの詳細については「使用例」をご覧ください。

ブレッドボードのØ91 mmの中央部は取り外し、中央にSM1ネジ付き穴が付いたセンターインサートRBBA1/M(別売り)に交換できます。回転ブレッドボードにポストを取り付けると、このインサートを使用することで、ブレッドボード面の下に取り付けたミラーからの光を上方向に誘導することができます。そのため光学素子をインサートに取り付けて、右の写真のようなセットアップなど様々な用途にお使いいただけます。こちらのセットアップでは、ブレッドボードRBB12A(RBB300A/M)がRBBA1(/M)で取り付けた楕円形光学素子付きマウントの周りを回転しています。回転ブレッドボードの下に取り付けたミラーを使用することで、レーザ光がミラーで偏向してブレッドボードの中心を通り、2番目のミラーで偏向してディテクタに送られます。 ブレッドボードをポストに取り付けるときには、クランプのアセンブリを締め付けすぎないようご注意ください。ネジを締め付けすぎるとブレッドボードが回転しなくなります。なお、プラットフォームに載せる荷重が大きくなると、回転に必要なトルクも大きくなります。

Item #RBB6A and RBB150A/MRBB12A and RBB300A/MRBB18A and RBB450A/M
Travel Range360° Continuous
Working Height0.5" (12.7 mm)
Load Capacity (Max)20 kg (44 lbs)a
TapsRBB6A, RBB12A and RBB18A: 1/4"-20 on 1" Pitch
RBB150A/M, RBB300A/M and RBB450A/M: M6 on 25 mm Pitch
Max Vertical Run Out Over Full Travel25 μm50 μm75 μm
Max Horizontal Run Out Over Full Travel25 μm50 μm75 μm
Overall Dimensions (Excluding Clamps)Ø6.64" (164 mm)Ø12.4" (314 mm)Ø18.27" (464 mm)
Platform DimensionsØ5.91" (150 mm)Ø11.8" (300 mm)Ø17.72" (450 mm)
Weight1.76 lb (0.8 kg)5.5 lb (2.5 kg)6.6 lb (3.0 kg)
ConstructionSolid Aluminum
FinishBlack Anodized
  • ブレッドボードを光学テーブルに取り付け時

プリズム分光器

RBB12A Prism Spectroscope

プリズム分光器は、原子蒸気の遷移を測定する光学実験でよく使われます。当社のプリズム分光器では、カラーCCDカメラDCU223C(旧製品)を使用して白色LEDのスペクトルをイメージ化します。また、回転ブレッドボードは取付け面が大きいため、追加のディテクタをはじめとする部品を簡単に取り付けることができ、部品の精密回転を可能にします。上写真の構成に使われている部品のリストは、下の表に掲載されています。型番をクリックすると、各部品の詳細が掲載されているポップアップウィンドウが開きます。

注:カラーのCCDカメラDCU223Cは旧製品で、単体では販売しておりません。ご用途向けの同様の製品としては、当社の1.6 MP CMOS小型サイエンティフィックカメラのラインナップがございます。このラインナップのカメラはモノクロまたはカラーのCMOSセンサを搭載しており、USB 3.0および当社の30 mmケージシステムに対応しています。

型番数量Description
Imperial Product List
DC22001高出力1チャンネルLEDドライバ、パルス変調機能付き、最大10.0 A、50.0 V
MCWHL716500 K, 930 mW (Min) Mounted LED, 1300 mA
SM1RC1SM1レンズチューブおよびCマウントエクステンションチューブ用スリップリング、#8-32タップ穴(インチ規格)
CP33T1SM1ネジ付き30 mmケージプレート、厚さ0.5インチ、固定リング2個付属、#8-32タップ穴(インチ規格)
ER4-P41Ø6 mm ケージアセンブリーロッド、長さ 101.6 mm、4個入り
SM1ZA1Z軸移動マウント、30 mmケージシステム対応
AC254-060-A-ML2マウント付きアクロマート複レンズ -Ø1インチ -f=60 mm- (ARコート:400-700nm)
PS8531等辺分散プリズム、N-SF11ガラス、25 mm
PM41大型クランプアーム、調整機能付き、#6-32ネジ付きポスト(インチ規格)
TR31Ø1/2インチポスト、#8-32ネジ、1/4”-20タップ穴付き、長さ3インチ(インチ規格)
BA1S1取付けベース、1インチ x 2.3インチ x 3/8インチ(インチ規格)
KM100B1キネマティックプラットフォームマウント、1.92 x 1.92インチ(インチ規格)
CP331SM1ネジ付き30 mmケージプレート、厚さ0.35インチ、固定リング2個付属、#8-32タップ穴(インチ規格)
S200RD1Ø25.4 mm(Ø1インチ)マウント付き光学スリット、スリット幅200 ± 4 µm、長さ3 mm
SM1L052SM1レンズチューブ、ネジ深さ12.7 mm、固定リング1個付属
SM1V052調整機能付きØ25 mm~Ø25.4 mm(1インチ)光学素子用レンズチューブ、移動量7.9 mm
NE20A1Ø25 mm吸収型NDフィルター (取付済み) -OD=2.0
SM1T21SM1カプラ、外ネジ付き、長さ12.7 mm、ロッキングリング2個付き
PH23Ø1/2インチポストホルダ、バネ付き六角固定つまみネジ付き、長さ2インチ(インチ規格)
TR11Ø1/2インチポスト、#8-32ネジ、1/4”-20タップ穴付き、長さ1インチ(インチ規格)
BA21取付けベース、2インチ x 3インチ x 3/8インチ(インチ規格)
RBB12A1Ø12インチ回転ブレッドボード(インチ規格)
型番数量Description
Metric Product List
DC22001高出力1チャンネルLEDドライバ、パルス変調機能付き、最大10.0 A、50.0 V
MCWHL716500 K, 930 mW (Min) Mounted LED, 1300 mA
SM1RC/M1SM1レンズチューブおよびCマウントエクステンションチューブ用スリップリング、M4タップ穴(ミリ規格)
CP33T/M1SM1ネジ付き30 mmケージプレート、厚さ12.7 mm、固定リング2個付属、M4タップ穴(ミリ規格)
ER4-P41Ø6 mm ケージアセンブリーロッド、長さ 101.6 mm、4個入り
SM1ZA1Z軸移動マウント、30 mmケージシステム対応
AC254-060-A-ML2マウント付きアクロマート複レンズ -Ø1インチ -f=60 mm- (ARコート:400-700nm)
PS8531等辺分散プリズム、N-SF11ガラス、25 mm
PM4/M1大型クランプアーム、調整機能付き、M4 x 0.7ネジ付きポスト(ミリ規格)
TR75/M1Ø12.7 mmポスト、M4ネジ、M6タップ穴付き、長さ75 mm(ミリ規格)
BA1S/M1取付けベース、25 mm x 58 mm x 10 mm(ミリ規格)
KM100B/M1キネマティックプラットフォームマウント、48.6 x 48.6 mm(ミリ規格)
CP33/M1SM1ネジ付き30 mmケージプレート、厚さ8.9 mm、固定リング2個付属、M4タップ穴(ミリ規格)
S200RD1Ø25.4 mm(Ø1インチ)マウント付き光学スリット、スリット幅200 ± 4 µm、長さ3 mm
SM1L052SM1レンズチューブ、ネジ深さ12.7 mm、固定リング1個付属
SM1V052調整機能付きØ25 mm~Ø25.4 mm(1インチ)光学素子用レンズチューブ、移動量7.9 mm
NE20A1Ø25 mm吸収型NDフィルター (取付済み) -OD=2.0
SM1T21SM1カプラ、外ネジ付き、長さ12.7 mm、ロッキングリング2個付き
PH50/M3Ø12 mm~Ø12.7 mmポストホルダ、バネ付き六角固定つまみネジ付き、長さ50 mm(ミリ規格)
TR30/M1Ø12.7 mmポスト、M4ネジ、M6タップ穴付き、長さ30 mm (ミリ規格)
BA2/M1取付けベース、50 mm x 75 mm x 10 mm(ミリ規格)
RBB300A/M1Ø300 mm 回転ブレッドボード(ミリ規格)

プリズム分光器のイメージ

下の写真は、ブレッドボード上のカメラを回転して撮った4枚の静止画像です。グラフの下のプロット図は対応するCCD画像内にあるピクセルの水平線の相対的な赤、緑、青色の明度を示しています。画像は互いに少し重なっています。


Posted Comments:
Gabriel Undeutsch  (posted 2022-07-26 15:21:16.75)
1. I have a question regarding adding a fine screw. We have such Large Area Rotation boards and where wondering whether there is the possiblitity to add a fine screw for the roation. Is there any such system avaliable? 2. Is the removable center portion always included when ordering? Is it possible to order it alone?
cwright  (posted 2022-07-27 02:54:55.0)
Response from Charles at Thorlabs: Thank you for your query. This breadboard does come with the removable centre portion and we can provide it as a separate item as a special upon request. Unfortunately there is not a dedicated way to add fine rotation to this breadboard. You could pottentially use kinematic positioners to achieve this. I will reach out to you to help with this.
Stephen McLaughlin  (posted 2019-05-13 10:27:55.657)
I have the RBB18A mounted on 4" tall posts (1" diameter). However, it's extremely difficult to turn. Is there some way to improve the needed torque for this? I find that I have to lift the board against the mounts to turn it. (I have 3 mirrors, 2 XYZ position mounts, and a 3 lb weight on it). I've made sure the locking screws are loose and ready to turn, but nothing has made this thing easier to turn. In my experience with it, it's not much in the way of rotation. (I also expected some sort of bearing setup, not 3 plastic clips and a dovetail connection).
bhallewell  (posted 2019-05-14 04:43:56.0)
Response from Ben at Thorlabs: Thank you for your feedback. I'll contact you directly to discuss this with you. The first thing to ensure is that the locking screws are not tightened. Additionally, as this is an aluminium dovetail design, the more load which is applied to the breadboard will cause the board to flex when clamped to 1” posts. The location of such posts on the mounting surface will also contribute to the torque required to move the platform. High load will naturally increase the friction between the breadboard & the clamps, increasing the torque required to rotate the platform.
Hugo.Diaz  (posted 2018-02-15 08:42:34.073)
Large-Area Rotation Stage RBB18A If I set up the stage in a vertical manner, what will be the maximum wait allowed to mount without damage it. Thanks, Hugo
bwood  (posted 2018-02-21 04:05:33.0)
Response from Ben at Thorlabs: Thank you for your feedback. The mounting clamps of the RBB series rotating breadboard are not designed to carry the full weight of the breadboard, and they will likely be damaged if the breadboard is mounted vertically in any orientation. Thus we advise that the RBB series breadboards should not be mounted vertically, and should only be mounted horizontally.
Stephen.Turner  (posted 2017-02-27 07:57:01.383)
Is the Large-Area Rotation Stage completely non-magnetic?
bhallewell  (posted 2017-03-01 05:06:10.0)
Response from Ben at Thorlabs: The breadboard body is anodised aluminium & contains components of delrin & stainless steel (screws). The stainless steel screws are the only magnetic components within the construction of the product.
ron.schulze  (posted 2017-02-08 15:26:46.883)
Is there a moment loading specification that we need to maintain for the RBB12A product?
bhallewell  (posted 2017-02-09 10:07:19.0)
Response from Ben at Thorlabs: We spec an on-axis load of 20 kg (44 lbs) however we do not hold a spec for moment load. I will contact you directly to discuss the suitability of the product for your application.
tcohen  (posted 2012-10-18 14:28:42.413)
Response from Tim at Thorlabs: I apologize that you’re not satisfied with the performance of your unit. We will of course offer a repair if the unit is not performing. We have contacted you directly to provide support.
Back to Top

大面積回転ブレッドボード

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
RBB6A Support Documentation
RBB6ACustomer Inspired! Ø6インチ回転ブレッドボード(インチ規格)
¥128,379
7-10 Days
RBB12A Support Documentation
RBB12ACustomer Inspired! Ø12インチ回転ブレッドボード(インチ規格)
¥167,879
7-10 Days
RBB18A Support Documentation
RBB18ACustomer Inspired! Ø18インチ回転ブレッドボード(インチ規格)
¥187,628
7-10 Days
RBBA1 Support Documentation
RBBA1大面積回転ブレッドボード用SM1ネジ付きセンターインサート、Ø3.58インチ、1/4"-20 タップ穴(インチ規格)
¥14,272
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
RBB150A/M Support Documentation
RBB150A/MCustomer Inspired! Ø150 mm 回転ブレッドボード(ミリ規格)
¥128,379
Today
RBB300A/M Support Documentation
RBB300A/MCustomer Inspired! Ø300 mm 回転ブレッドボード(ミリ規格)
¥167,879
Today
RBB450A/M Support Documentation
RBB450A/MCustomer Inspired! Ø450 mm 回転ブレッドボード(ミリ規格)
¥187,628
Today
RBBA1/M Support Documentation
RBBA1/M 大面積回転ブレッドボード用SM1ネジ付きセンターインサート、Ø91 mm、M6タップ穴(ミリ規格)
¥14,272
7-10 Days