大面積移動ステージ

概要
Feedback

Item #	TBB0606 (TBB1515/M)	TBB1212 (TBB3030/M)
Travel Range	2.4" (60 mm)	4.8" (120 mm)
Working Height	0.5 " (12.7 mm)
Rack and Pinion Adjustment Ratio	31.4 mm per rev of Hex Screw
Max Load Capacity	44 lb (20 kg)
Rack and Pinion Load Capacity	22 lb (10 kg)
Run Out Over Full Travel Range	＜ 50 m
Pitch Deviation	±0.015°	±0.025°
Yaw Deviation	±0.005°	±0.01°
Outer Dimensions (W x D)	6" x 7.66" (150.0 mm x 191.7 mm)	12" x 13.66" (300.0 mm x 341.4 mm)
Moving Platform Dimensions (W x D)	6.0” x 5.95” (150.0 mm x 147.6 mm)	12.0” x 11.92” (300.0 mm x 297.5 mm)
Weight	1.7 lb (780 g)	6.7 lb (3.06 kg)
Construction	Solid Aluminum
Finish	Black Anodized

特長

手動移動
ラック・アンド・ピニオンによる精密移動(2.0 mm六角レンチ使用)
2種類のサイズをご用意(右表参照)
12.7 mmのデッキ高で標準的なブレッドボードに対応
2 mm六角レンチにより位置固定可能/li>
黒色アルマイト加工

こちらの大面積移動ステージは、150 mm x 191.7 mm(TBB1515/M)、300 mm x 341.4 mm (TBB3030/M)の2種類のサイズでご用意しています。実験装置一式の位置を一度に調整する必要のある用途に適しています。移動量はTBB1515/Mが60 mm、TBB3030/Mが120 mmとなっています。

租い位置決めは、移動プラットフォームを押すだけでできます。精密調整については、2 mm六角レンチを用いて調整できます。また、2 mm六角レンチで固定ネジを締め付けて動きをロックできます。

すべてのステージの作業高さは12.7 mmで、これは当社の標準的なMB シリーズのブレッドボードと同じ高さです。ステージには標準的な25 mm間隔のM6貫通穴があります。2つのステージは、TBBAシリーズのアダプタープレート(下記掲載)を用いて、2軸XY構成にすることができます。この2軸アセンブリの高さは32.75 mmになります。ステージおよびアダプタープレートには反射を抑える黒色アルマイトコーティング仕上げが施されています。

Posted Comments:

John M (posted 2020-11-24 16:46:12.73)

Is the travel for the TBB1212 4.8" in both directions or 2.4" in either direction?

cwright (posted 2020-11-25 09:41:46.0)

Response from Charles at Thorlabs: Hello John, the travel range of the TBB1212 is a total of 4.8", with 2.4" of travel in either direction from the centre.

Sunmin Ryu (posted 2020-03-06 03:02:39.32)

Is this correct? 31 mm per revolution is not fine adjustment. Rack and Pinion Adjustment Ratio: 31.4 mm per rev of Hex Screw

AManickavasagam (posted 2020-03-09 12:26:13.0)

Response from Arunthathi at Thorlabs: Thanks for your query. Fine positioning is achieved by adjustment of the rack and pinion using a hex key and this would be 31.4 mm per rev of hex screw. This was termed fine positioning relatively comparing it to coarse adjustment which is done by pushing the moving platform.

GARY FRENCH (posted 2020-03-02 16:20:03.037)

DO YOU SELL THE TBB6060 WITH THE 1/4-20 HOLE PATTERN?

AManickavasagam (posted 2020-03-05 03:35:50.0)

Response from Arunthathi @ Thorlabs: Thanks for your query. Yes, the TBB0606 and the TBB1212 comes with 1/4-20 and the metric versions (/M) comes with M6 hole pattern.

Kai.Viherkanto (posted 2018-11-07 11:51:58.437)

Could you make TBB1212 with a longer travel, up to 300 mm? Or is it possible to connect two on top of each other and still support 20 kg in the extreme position? Do you have another platform solution for ca 300 mm linear travel? Best regards Kai Viherkanto

AManickavasagam (posted 2018-11-09 09:57:45.0)

Response from Arunthathi @ Thorlabs: Thanks for your query. Apologies we are unable to offer longer travel TBB* stage. Mounting two TBB1212 on top of each other will allow to support ~ 16.5 kgs (excluding the weight of the mounted stage which is 3.06 kgs) at the extreme positions. Unfortunately, there is no similar platform alternative for 300 mm travel, the only other option we could offer, if suitable for your application would be to mount a breadboard on a LTS300 stage. Thanks.

thibaut.moulin (posted 2018-01-16 14:59:10.7)

Good product but the the fine adjustment with rack and pinion is not manufacturing with good quality. Plastic material is not good for the life of the stage. A aluminium rack and pinion should be better and a accurate fine adjustment too. Please upgrade this excellent solution.

AManickavasagam (posted 2018-01-19 08:28:04.0)

Response from Arunthathi at Thorlabs: Thank you for your feedback. our stages do get tested extensively for high reliability and lifetime. However, I will pass on your comments to our engineers.