分岐比可変偏光ビームスプリッターキット


  • Splits Polarized Light into Two Paths
  • Mechanically and Thermally Stable
  • Continuously Variable Split Ratio from 0 to 30 dB

FiberPort Accepts FC/PC and FC/APC Patch Cables
(3 Places)

PFS-FFT-1X2-1550

Kit for 1200 - 1600 nm

PFS-FFT-1X2-780

Kit for 700 - 1000 nm

Related Items


Please Wait
Variable Polarization Beamsplitter Kit Componentsa
Item #PFS-FFT-1X2-780PFS-FFT-1X2-1550
FiberBenchFT-51X60
FiberPorts3 x PAF2-2B3 x PAF2-2C
Wall Plates3 x HCA3-SM1
Polarizing BeamsplitterFBT-PBS052FBT-PBS054
Half-Wave PlateFBR-AH2FBR-AH3
Download a FiberBench Assembly File

Click to Enlarge

こちらのビームスプリッターキットでは、偏光ビームスプリッタと1/2波長板は別々に梱包されています。

Click to Enlarge
偏光ビームスプリッタは、チップ/チルトおよび精密回転用の調整ネジが付いたキネマティックベースに取り付けられています。

特長

  • パワーはファイバにより制限:10 W (CW、典型値)
  • FiberBenchアクセサリを使用して構成
  • 分岐比は連続可変 
  • 1 x 2可変カプラとして使用可能
  • FC/PC、FC/APCパッチケーブルに対応
  • 消光比
    • Tp:Ts > 1000:1
    • Rs > 99.5%
  • 動作波長範囲:700~1000 nmまたは1200~1600 nm
  • ほかの波長域用、またはカスタム仕様による配置をご希望の場合は、当社までご連絡ください。

こちらの可変偏光ビームスプリッターキットは、当社の多軸FiberBenchFT-51X60をベースにしています。入射FiberPortには偏波保持ファイバを接続することができ、その出射光はコリメート光になります。これらのキットに付属するFiberPortには、ワイドキースロットが付いています。ビームの偏光面は1/2波長板により回転します。波長板を回転することで偏光状態(SOP)が変化し、偏光の垂直成分と水平成分の比率が変化します。それに伴い偏光ビームスプリッターキューブの透過光および反射光の大きさも変化します。

ビームスプリッタの消光比は >1000:1(TP:TS)です。P成分の平均透過率は>90%で、S成分の平均反射率は>99.5%です。詳細については「グラフ」タブをご参照下さい。分岐比は0~30 dBの範囲で連続可変ですが、その値は入射用の偏波保持ファイバの偏光消光比、およびΔλ ≤ 3 nmの場合にはそのスペクトル線幅に依存します。

組み立てについて
こちらのキットには、組み立てと調整に必要な部品がすべて付属しています。組み立てるには、1/2波長板とビームスプリッターモジュールの位置決めピンをFiberBenchの適切なスロットに挿入してください。固定するには#2-56止めネジ(セットスクリュ)と0.9 mm六角レンチを使用します。ビームスプリッターキューブは4個の0.050インチ六角調整ネジを用いてアライメントし、それらのネジは固定カラーおよび付属のスパナレンチSPW403を用いて固定します。各FiberPortのX、YおよびZθアジャスタにも0.050インチレンチを使用できます。X/Yアジャスタの感度はFiberPortの前面についている2つの穴と0.028インチ六角レンチを用いて調整できます。 FiberPortの向きは、付属の#0-80固定ネジと0.050六角レンチを用いて固定できます。FiberPortを固定する時は、ミスアライメントや損傷が生じないように慎重に行ってください。多くの場合、固定する必要はありません。固定方法についてはFiberPortのマニュアルをご参照ください。1/2波長板の回転は、波長板の上部についているネジと0.050インチレンチで固定できます。 

FiberBench Accessories
FiberPortsOptic MountsAlignment ToolsPolarizers
Beamsplitter ModulesMirror ModulesRotating Wave PlatesFiberBenches

FiberBench型可変偏光ビームスプリッターキットPFS-FFT-1X2-780、700~1000 nm


Click to Enlarge
性能はビームスプリッタのコーティングによって制限されます。透過率を向上させるため、ビームスプリッターキューブPBS052の表面には波長範囲620~1000 nm 用のARコーティングが施されています。
RABH-980
Click to Enlarge

生データはこちらからダウンロードできます。
青い網掛け領域は、偏光ビームスプリッターキットPFS-FFT-1X2-780の動作波長範囲を示しています。

FiberBench型可変偏光ビームスプリッターキットPFS-FFT-1X2-1550、1200~1600 nm


Click to Enlarge
性能はビームスプリッタのコーティングによって制限されます。透過率を向上させるため、ビームスプリッターキューブPBS054の表面には波長範囲1200~1600 nm用のARコーティングが施されています。
RABH-1600
Click to Enlarge

生データはこちらからダウンロードできます。
青い網掛け領域は、偏光ビームスプリッターキットPFS-FFT-1X2-1550の動作波長範囲を示しています。

Posted Comments:
Preeti Yadav  (posted 2024-03-18 11:09:22.467)
hello! I wanted to ask if it is straightforward to assemble this polarization beamsplitter kit if we have all the components (namely 1xFT-51X60, 3 x PAF2-2C, 3 x HCA3-SM1, FBT-PBS054 and FBR-AH3)? I am asking this because we already have some of these components, and wouldn't want to buy the whole kit then.
ksosnowski  (posted 2024-03-21 03:46:09.0)
Hello Preeti, thanks for reaching out to Thorlabs. Yes we do list all of the components from these kits separately in our catalogue so it is fairly straightforward to assemble. Aligning the FiberPorts for optimal coupling is its own process and, even with the kits, alignment is necessary upon install. Our main FiberPort page has videos from Thorlabs' YouTube page detailing the alignment procedure using the 5 adjustment screws of the port. I have reached out directly to discuss this in further detail.
Preeti Yadav  (posted 2023-10-26 14:02:54.66)
Hello! Can PFS-FFT-1X2-1550 be used to couple into MMF62.5 at the two output ports when using as PBS? Thanks!
cdolbashian  (posted 2023-11-15 11:34:00.0)
Thank you for reaching out to us with this inquiry. We do indeed plan for this type of application with the component you mention here. I have contacted you directly to discuss your application.
Vytas Zickus  (posted 2023-09-05 12:54:56.647)
Is it possible to attach a fourth port. Judging from .STL files, it does not look like the fourth port would attach?
cdolbashian  (posted 2023-09-11 01:45:33.0)
Thank you for reaching out to us with this inquiry! On the mechanical drawings, we state: 8-32 HOLES, USED FOR MOUNTING WALL PLATES SOLD SEPARATELY. In this case, the wall plate mentioned here would be something like HCA3. I have contacted you directly to discuss the options available.
Daniel Hickstein  (posted 2022-10-26 11:47:17.27)
If using this as a splitter, the polarization will be opposite on the two fibers, correct? In many situations, it would be nice if both of the output fibers had the same, standard (slow-axis) polarization. Is it possible to rotate the key of the port to rotate the polarization by 90 degrees? Or would it be necessary to use a second waveplate? Thanks!
jgreschler  (posted 2022-10-28 03:41:25.0)
Thank you for reaching out to Thorlabs. You are correct that if you use this with two PM fibers with the same key alignment that results in two different states being launched. Fast axis aligned key fibers are available as a custom item. I have reached out to you directly to discuss quoting.
jgreschler  (posted 2022-10-28 03:41:25.0)
Thank you for reaching out to Thorlabs. You are correct that if you use this with two PM fibers with the same key alignment that results in two different states being launched. Fast axis aligned key fibers are available as a custom item. I have reached out to you directly to discuss quoting.
mehmet sengunes  (posted 2022-06-29 17:41:39.163)
Dear Madame or Sir, I would like to ask you that what are the alignment accuracies both tilt and X,Y? Best Mehmet
jdelia  (posted 2022-07-19 01:46:17.0)
Thank you for contacting Thorlabs. I have reached out to you directly to clarify your inquiry.
Eusebio Bernabeu  (posted 2021-04-22 09:28:32.197)
We need to know if PFS-FFT- 1x2 can be provide to 633 nm
YLohia  (posted 2021-04-22 11:29:45.0)
Hello, the FBR-AH2 half-waveplate in the PFS-FFT-1X2-780 is the limiting factor (wavelength range: 700 - 1200 nm) for 633 nm operation. If you already have this part, you can obtain 633 nm operation by replacing the FBR-AH2 with the FBR-AH1. Custom wavelength configurations for these parts can be requested by clicking the "Request Quote" button above or by contacting your local Thorlabs Tech Support team (in your case, europe@thorlabs.com).
Igor Konieczniak  (posted 2021-02-17 12:24:37.06)
Hello, For some of the fibre benches the site advertise a plastic dust cover. Does the PFS-FFT-1X2-1550 come with one? If not, can I purchase one separately? Cheers, Igor
YLohia  (posted 2021-02-22 11:29:52.0)
Hello, the FiberPorts in the PFS-FFT-1X2-1550 also come with the receptacle dust covers.
akumr  (posted 2018-06-19 07:10:29.78)
Can you offer me the "Variable Polarization Splitter Kit" for wavelength of 770 nm?
nbayconich  (posted 2018-06-20 09:15:16.0)
Thank you for contacting Thorlabs. We can provide one of these fiberbench polarization beamsplitter kits designed for 770nm. I will contact you directly with a quote.
jjurado  (posted 2011-08-09 12:24:00.0)
Response from Javier at Thorlabs to scottie730318: Thank you for your interest in our products. We can certainly offer version of the PFS-FFT-1X2-1550 polarization beam splitter kit for 1060 nm. I will contact you directly with price and availability information.
scottie730318  (posted 2011-08-09 12:16:37.0)
Dear sir: Can you offer me the "Variable Polarization Splitter Kit" for wavelength of 1060 nm?
apalmentieri  (posted 2010-01-04 14:57:40.0)
A response from Adam at Thorlabs: I can provide you with more information and will make sure that the website is updated to include this information. The PBS cubes are designed to transmit the P component and reflect the S component. The P component has a tranmission > 96% and a reflection 98%. The extinction ratio of the transmitted P-component and reflected S-component is > 1000:1.
zyan  (posted 2010-01-04 13:16:10.0)
Hi there, Can you send us some product of PBS, polarization beam splitter, or can you introduce a little more about the current product as well? Thanks, Zhizhong
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
PFS-FFT-1X2-780 Support Documentation
PFS-FFT-1X2-780Customer Inspired! FiberBench偏光ビームスプリッターキット、700~1000 nm
¥449,829
7-10 Days
PFS-FFT-1X2-1550 Support Documentation
PFS-FFT-1X2-1550FiberBench偏光ビームスプリッターキット、1200~1600 nm
¥449,829
Lead Time