光ファイバ用アダプター、スリーブ&バルクヘッドアダプター


  • FC/PC, FC/APC, SMA, ST®/PC, LC®/PC, SC/PC, and Ferrule Mating Sleeves
  • Precision Mating Sleeves for PM Fiber
  • FC/PC, SMA, and ST/PC Bulkhead Adapters
  • Protective Metal Caps

ADALC1

LC®/PC Mating
Sleeve

ADAFC3

FC/APC Mating
Sleeve

CAPT1

ST®/PC Cap

ADAF1

Ø2.5 mm Ferrule Mating Sleeve

ADAFCSMA1

FC/PC to SMA Mating Sleeve

HAFC

FC/PC Bulkhead Adapter

ADABD1

L-Bracket for D-Hole
FC Mating Sleeve

Panel-Mounted
Mating Sleeves

Application Idea

ADASMAV

Vacuum-Compatible SMA Mating Sleeve

Related Items


Please Wait

アダプタ&スリーブのセレクションガイドa

Connector 2

Connector 1
FC/PCFC/APCSMALC®/PCSC/PCST®/PCØ1.25 mm
Ferrule
Ø2.5 mm
Ferrule
FC/PCADAFC1b
ADAFC2b
ADAFCPM1b
ADAFCPM2b
ADAFCPM3
ADAF1c
ADAF4-5
ADAFCSMA1bADAFCSC1
ADAF1c
ADAF4-5
ADAFCST1
ADAF1c
ADAF1c
ADAF4-5
FC/APCADAFC3b
ADAFC4b
ADAFCPM1b
ADAFCPM2b
ADAFCPM3
SMAADAFCSMA1bADASMAd
ADASMAVe
LC®/PCADALC1
ADAL1c
ADAL4-5
ADAL1c
ADAL4-5
SC/PCADAFCSC1
ADAF1c
ADAF4-5
ADASC1
ADAF1c
ADAF4-5
ADAF1cADAF1c
ADAF4-5
ST®/PCADAFCST1
ADAF1c
ADAF1cADASTb
ADAF1c
ADAF1c
Ø1.25 mm
Ferrule
ADAL1c
ADAL4-5
ADAL1c
ADAL4-5
ADAL3f
Ø2.5 mm
Ferrule
ADAF1c
ADAF4-5
ADAF1c
ADAF4-5
ADAF1cADAF1c
ADAF4-5
ADAF2f

特長

  • コネクタ付きファイバーケーブルのコアをアライメント
  • Ø2.5 mmまたはØ1.25 mmフェルール用アダプタおよびスリーブ
  • 組み込み用途(OEM用途)および特注用途向けバルクヘッドアダプタ
  • 真空対応SMA-SMAアダプタもご用意
  • 一部アダプタには金属製保護キャップもご用意
  • FCアダプタにはアダプタ無しのL型ブラケットもご用意

アダプタおよびスリーブ
当社のアダプタおよびスリーブは、業界標準のコネクタ(FC/PC、FC/APC、SMA、 LC®/PC、SC/PC、ST®*/PC)付きファイバの接続にお使いいただけます。これらのアダプタおよびスリーブによって、コネクタ付けされたファイバ端のコアを適切にアライメントして、2つのコアを互いに接触させて後方反射を最小に抑えることができます。ただし、SMAコネクタ用アダプタはエアスペース型のため、例外となります。このページでご紹介しているアダプタの一部は、標準のM6ネジ規格のオプトメカニクスに対応している L型ブランケットにマウント済みでもご用意しています。

バルクヘッドアダプタ
FC/PC、SMAおよびST/PCバルクヘッドアダプタには、自由空間に光を出力するためのコネクタが1つ付いています(ST/PCアダプタは10個セットでもご用意しております)。コンパクトなサイズで、出力側には取付用のネジ切り加工を施しているので、製品組み込み用途(OEM用途)やカスタム用途に適しています。FC/PCとSMAバルクヘッドアダプタは、単体構造によりカスタム用途に適しています。ST/PCバルクヘッドアダプタは、別売りの3/8"-24止めナットを用いることにより製品組み込み用途(OEM用途)にご使用いただけます。また、コネクターフェルール前面がアダプタの背面に合う設計になっています。この設計により、ファイバをアダプタに取り付けた光学素子または機器に近接設置することができます。

ご使用にあたって
接続による損失を最小限に抑え、コネクタの損傷を防ぐために、ファイバ先端をきれいに保つことが重要です。 SMAアダプタ以外では、ファイバの先端はアダプタ内で物理的に接触します。屈折率マッチングジェルG608N3(下記掲載)を使うことで、ファイバ接続部での損失を減らすことができます。当社では、光ファイバ用の検査ツールクリーニング用備品もご用意しています。 コネクタ付けされていないファイバには、再使用可能で一時的な接続に使用できる ファイバ-ファイバ用スプライサ製品をお試しください。ファイバの端面を保護するファイバーキャップもご用意しています。

*ST®はLucent Technologies社の登録商標です。


Posted Comments:
Yuqi Meng  (posted 2023-11-02 12:56:54.767)
ADAFCPM2 Does this work for FC/PC to FC/PC or it works for FC/APC to FC/APC or it works for both?
cdolbashian  (posted 2023-11-15 02:16:42.0)
Thank you for reaching out to us with this inquiry. This would indeed work for both FC/PC-FC/PC and FC/APC-FC/APC.
健 高  (posted 2023-08-28 18:05:03.153)
ADAFC3 - FC/APC转FC/APC匹配套管适用于FC/PC 接口的吗
cdolbashian  (posted 2023-08-30 12:14:25.0)
Thank you for reaching out with this inquiry. You are asking about the compatibility of the FC/APC mating sleeves for FC/PC patch cables. As long as you are using a narrow key on your connector, these are indeed compatible.
Mark Denninger  (posted 2023-05-02 13:52:20.45)
Dear Thorlabs What is the exact ID on the SMA adaptor? Drawing says 0.13"/3.2 mm. Are these numbers exact or rounded up? And what is the corresponding tolerance on the ID? Kind regards. Mark
jdelia  (posted 2023-05-02 03:03:07.0)
Thank you for contacting Thorlabs. The diameter is in fact rounded up, I have reached out to you directly to provide the exact nominal diameter and tolerances.
user  (posted 2023-04-11 14:47:14.493)
Hi, please can you tell me the material used in ADAFCPM2? I think it is stainless steel and ceramic? Thanks Jake
cdolbashian  (posted 2023-04-13 10:48:10.0)
Thank you for reaching out to us with this inquiry. The body of this component is indeed stainless steel, and the sleeve inside is ceramic.
user  (posted 2023-03-09 08:43:15.783)
Hi, is the ADAFCPM2 supposed to have some play in the inner-most sleeve (where the ceramic is)? Is it supposed to be able to move relative to the square flange when a fiber is screwed to one side? Thanks
jgreschler  (posted 2023-03-10 02:37:58.0)
Thank you for reaching out to Thorlabs. There are a couple of reasons this might be happening, the most likely is that the ceramic split sleeve inside the metal housing is cracked. I've reached out to you directly to troubleshoot this and resolve the concern.
Dahlia Ghoshal  (posted 2023-02-21 14:34:13.563)
Hi, I was wondering why there are mating sleeve options for both wide and narrow key slots? If all Thorlabs fiber patch cables have narrow keys, is there a situation in which a wide key slot is preferable?
jgreschler  (posted 2023-02-24 10:54:09.0)
Thank you for reaching out to Thorlabs. Generally speaking, if the fiber type doesn't require rotational accuracy like multimode or single mode, there is no issue with using a wide key mating sleeve for a narrow key connector. This is not the case for polarization maintaining fibers which require the axis rotation to be accurate, so we would recommend using narrow key mating sleeves for that application.
Shuyu Dong  (posted 2022-11-15 14:43:17.457)
Dear Officer, May I know the fabrication tolerance of ADAF1? Such as the tolerance of the inner circle diameter, the outer circle diameter, and the width of the opening gap. Thank you. Best regards, Shuyu
jgreschler  (posted 2022-11-17 02:37:06.0)
Thank you for reaching out to Thorlabs. Manufacturing tolerances can be requested by contacting techsupport@thorlabs.com. I have reached out to you directly with the requested information.
Susan Thomas  (posted 2022-04-29 18:02:32.787)
Is it okay to connect an FC/PC patch cable at one end of this mating sleeve (ADAFC3) and FC/APC cable at the other end? Will there be any losses?
jgreschler  (posted 2022-05-03 10:43:14.0)
Thank you for reaching out to Thorlabs. ADAFC3 is not suitable for mating an FC/PC to an FC/APC connector, there will be an air gap between the fibers due to the angle in FC/APC.
Michael Debus  (posted 2022-04-21 08:46:24.973)
Hi, I have a question regarding the ADAFCSMA1. The description reads "SMA mating sleeves are air spaced". Does this also hold for the FC-PC to SMA adapter or are the two fibers in direct contact when using the ADAFCSMA1 mating sleeve? Kind regards, Michael
jgreschler  (posted 2022-04-21 10:20:25.0)
Thank you for reaching out to Thorlabs. The FC/PC to SMA mating sleeve does leave an air gap between the two ferrules.
Viktor Erlandsson  (posted 2021-09-23 15:20:11.703)
This product would be more useful if it worked with thinner panels, down to 1mm would be nice.
user  (posted 2021-08-24 13:22:24.077)
Hi, what improvements can be expected when using the index matching gel with a APC/APC PM fiber mating? Thanks!
YLohia  (posted 2021-08-30 11:28:11.0)
Hello, thank you for contacting Thorlabs. Index-matching gels may be used in conjunction with pairs of mated connectors or with mechanical splices to reduce signal reflected in the guided mode (optical return loss). Without the use of an index-matching material, Fresnel reflections will occur at the smooth end faces of a fiber unless there is no fiber-air interface or other significant mismatch in refractive index. These reflections may be as high as −14 dB. Unfortunately, we don't have a spec for the improvements for APC-APC PM fiber mating when using this gel, since that depends on various factors such as wavelength, MFD, core-to-core concentricity of the fibers, and tolerancing of ferrules and mating sleeves. Generally, there wouldn't be major improvements expected for FC connectors, since those are contact-based connectors and index matching gel provides maximum benefits when used in the presences of an air-gap between fibers.
Keith Hodge  (posted 2020-11-23 11:26:02.307)
Would be nice if you could add / include the thread spec on the drawing. I was expecting a 3/8"-32 thread like many other ST mating sleeves. Looks like yours is a 3/8"-24 thread... I'll have to change something.
YLohia  (posted 2020-11-23 02:33:18.0)
Hello, thank you for your feedback. We're sorry to hear about the issues caused by this. We will update the web presentation to include this information.
Bernhard Reitinger  (posted 2020-11-17 11:13:50.843)
Dear ladies and gentleman. Is it possible to manufacture the ADAFC3 in such an order, that the polarisation states (or keyholes) are aligned at 45°? By this it would be possible to rotate the polarisation state without any additional component. Best regards Bernhard Reitinger
YLohia  (posted 2020-11-17 10:56:07.0)
Hello Bernhard, custom items can be requested by emailing your local Thorlabs Tech Support team (in your case, Europe@thorlabs.com). I have reached out to you directly to discuss the possibility of offering this.
Jaroslav Formanek  (posted 2020-06-02 06:52:00.373)
ADASMA - SMA to SMA Mating Sleeve Is it possible to use this sleeve for optical cable with core 600 um?
YLohia  (posted 2020-06-02 09:44:11.0)
Thank you for contacting Thorlabs. Yes, this would be possible, assuming both connectors you intend to mate are SMA905.
user  (posted 2020-04-16 12:39:13.783)
Can the ADAFCSC1 be used to connect a fibre with an FC/APC connector to a fibre with an SC/APC connector?
YLohia  (posted 2020-04-16 10:46:00.0)
Hello, thank you for contacting Thorlabs. The keys of the ADAFCSC1 should still allow the ferrules to maintain the angle alignment and physical contact between FC/APC and SC/APC connectors. I have reached out to you directly to discuss this further.
Gedminas Elertas  (posted 2019-07-30 10:22:56.88)
Hi Thorlabs, The question is about PM Fibre Mating Sleeve. We want to connect two PM Patch Cable, PANDA, 780 nm, FC/APC, fibres together. The input fibre would have about 1W of optical power. Would the second fibre be damaged if we used PM fibre mating sleeve since the optical power is above the damage threshold specified for this PM fibre? If yes, any advice on what to use to connect two APC terminated fibres when the optical power is about 1W?
YLohia  (posted 2019-07-30 11:11:34.0)
Hello, thank you for contacting Thorlabs. We recommend splicing the two fibers together for such high power applications. The connectors typically fail around power levels of ~300 mW.
Jean-Baptiste Le Bouquin  (posted 2019-04-09 12:34:35.633)
Can you explicit the characteristic of the sleeves used in ADAFCPM2. Are they Zirconia ceramic ? Thanks, JB
YLohia  (posted 2019-04-09 02:38:03.0)
Hello JB, thank you for contacting Thorlabs. The housing is made of nickel plated brass and the sleeve is zirconia ceramic.
Ian Hill  (posted 2019-03-26 12:40:28.017)
Hi, Part ADAFC4 is a solid piece as far as I can see so why is it not spec'd for PM? Thanks.
YLohia  (posted 2019-03-26 03:04:57.0)
Hello, thank you for contacting Thorlabs. The ADAFC4 is not a single piece. The ceramic sleeve inside that holds the ferrule is not as tightly toleranced as the one on the ADAFCPM2. The latter also has a tighter tolerance on the alignment key slots to ensure polarization axis match between two fibers.
carlos.montero  (posted 2017-10-11 14:07:05.387)
Hello. According to an answer on your ADAFCSMA1 adapter, it seems that you can provide only its FC part. How should I proceed to buy this? Do I put the full item in the shopping cart and then contact you? Thank you.
nbayconich  (posted 2017-10-12 08:41:20.0)
Thank you for contacting Thorlabs. We can provide the SMA or FC component to this part. I will contact you directly with a quote.
miranb  (posted 2017-09-04 20:11:05.02)
Hi. It seems that the suggested clearance hole (pdf file) of the ADASMA adapter is too large. The adapter spins freely instead of being locked in by the cut off.
tfrisch  (posted 2017-09-20 11:46:09.0)
Hello, thank you for contacting Thorlabs. The SMA standard has no preferred rotational alignment, so the lock washer and jam nut will be sufficient to prevent rotation. I will reach out to you directly to discuss your application.
max.schiller  (posted 2016-12-06 14:54:49.88)
Hi. What is the temperature working range for the index-matching gel G608N3? Max
tfrisch  (posted 2016-12-14 04:43:47.0)
Hello, thank you for contacting Thorlabs. We specify the Temperature Coefficient up to 60°C, so that would be the closest to an upper bound that we specify. At 100°C, the evaporation and separation are rather significant. See the spec sheet here: https://www.thorlabs.com/drawings/c02eb4ea77628f04-F17A4464-5056-0103-793ADCEA19DDF3BE/G608N3-SpecSheet.pdf
bmills  (posted 2016-03-29 12:21:42.0)
Hello, We are looking for the FC half of your ADAFCSMA1 adapter. We have been buying these, heating them with a torch, and unscrewing the two pieces. This allows us to screw the FC part directly on our SMA input spectrometers. Do you sell this part separately? Thank you.
besembeson  (posted 2016-03-30 03:39:53.0)
Response from Bweh at Thorlabs USA: We can provide the FC part to you as a special item. I will contact you.
max.schiller  (posted 2015-03-11 11:43:34.897)
Hi. In my system I want to couple several uWs of a narrow-band laser emission in a fiber and transfer it to an optical detector. There should be two mating sleeves: on a wall of a sealed casing and on a panel of a rack box. Question: which fibers/connectors should I use to minimize transmission deviation of the whole fiber chain by dis- and reconnection of the fiber patches? Overall transmission is not important. Fiber type - preferably MM for a better coupling. Wavelengths: separate fiber chains for 532nm, 905nm, 1064nm and 1570nm. Thanks
besembeson  (posted 2015-03-26 02:12:58.0)
Response from Bweh at Thorlabs USA: We will followup with you by email to discuss this further.
smee  (posted 2015-01-30 17:17:42.243)
Hi, I want to connect two PM fibers with both FC/APC connectors (narrow key). Which Mating Sleeve should I choose to achieve the best matching of polarization axis AND the lowest insertion loss? The website states: ADAFC3 or ADAFC4 has IL < 0.5 dB (but not mentioning PM matching performance). ADAFCPM2 has "best matching of polarization axis" but IL < 1.0 dB (which is higher than ADAFC3 or 4). The posted comment of jlow (2013-11-25 08:46:59.0) says PM Fiber Mating Sleeves have IL around 0.5 dB. I would have expected that ADAFCPM2 also has better IL performance due to manufacturing from a single piece of metal. Do ADAFC3 and ADAFC4 really have same IL performance? Thanks for helping!
jlow  (posted 2015-02-04 03:23:53.0)
Response from Jeremy at Thorlabs: The PM version does have higher tolerance and should have similar insertion loss as the non-PM version.
user  (posted 2014-11-20 08:55:30.583)
what is the cleaning procedure for the vacuum compatible SMA sleeve?
jlow  (posted 2014-11-25 11:36:48.0)
Response from Jeremy at Thorlabs: The cleaning and bake-out procedure is dependent on the vacuum application. The mating sleeve is chemically cleaned and prepared for vacuum applications before packaging. It is compatible directly out of the packaging with vacuum environments down to 10^-10 Torr
g9622513  (posted 2013-11-21 20:05:33.32)
Please provide the Insertion Loss of PM Fiber Mating Sleeves at 1064 nm.
jlow  (posted 2013-11-25 08:46:59.0)
Response from Jeremy at Thorlabs: The insertion loss is around 0.5dB.
maxein  (posted 2013-07-26 13:31:43.36)
Advantage of PC-PC over APC-APC? Hello! In the group I am working, all the FC-fiber-fiber connections using mating sleeves are done using PC connections, as I understand mostly for historical reasons. I would like to switch to APC-APC connections in the future to reduce reflexions, but I would like to be sure: Is a coupling APC-APC as efficient as a coupling PC-PC (using e.g. a sleeve like ADAFCPM2)? Are there any other disavantages to APC-APC over PC-PC? Thanks!
pbui  (posted 2013-08-01 14:11:00.0)
Response from Phong at Thorlabs: When mating two FC/PC or FC/APC connectors together, there should be no change in the back reflection measurement since the physical contact of the two ferrules eliminates the air interface, effectively giving you zero reflection. Insertion losses can stem from fiber core to fiber core concentricity and face angle alignment. With that said, there are no disadvantages for APC-APC mating; it functions exactly the same way as PC-PC mating. You should use narrow key mating sleeves like ADAFC3 instead of wide key like ADAFC1. Either is fine for FC/PC because since there is no angle on the ferrule, alignment would not be affected by the slop in the key. For APC-APC, you need the 8 degree angle of each ferrule to be aligned to get a good connection.
jlow  (posted 2012-12-20 14:46:00.0)
Response from Jeremy at Thorlabs: In the ADAFCSMA1, the two fiber tip would make physical contact. Inside the part is a stainless steel sleeve. I will e-mail you to discuss the tolerance of the part that you are looking for.
alexandre.pichon-ajilon  (posted 2012-12-19 05:20:27.69)
Hello, I am interested in your adapter ADAFCSMA1. You wrote on the datasheet that “SMA mating sleeves are air spaced”. Can you tell me, in this case FC to SMA, the approximative distance between the 2 optical faces? Because of the SMA connector, I think there is no zirconia sleeve in this adapter. Can you tell me how the 2 ferrules are guided? Do you have mechanical tolerances to tell me?
sharrell  (posted 2012-12-03 15:50:00.0)
Response from Sean at Thorlabs: Thank you for contacting us. The mounting holes are 2-56 threaded. We will update the drawing to remove the reference to M2 threading. Also, these parts are provided with the 2-56 screws to attach the mating sleeves, and we will add this information to the web presentation.
makarov  (posted 2012-12-01 22:40:54.0)
What thread is in the little connector mounting holes in ADABS1 and ADABS2? The drawing says "#2-56 (M2)", but these are incompatible thread sizes, aren't they? So are these parts metric or imperial?
tcohen  (posted 2012-03-28 13:12:00.0)
Response from Tim at Thorlabs: Our ADASMA mating sleeves will have a typical coupling loss of .5dB.
n.andermahr  (posted 2012-03-28 03:19:36.0)
What is the typical coupling efficiency for a SMA/SMA mating sleeve? (E.g. coupling two fibers with 200 micrometer cores)
lmorgus  (posted 2011-09-29 18:22:00.0)
Response from Laurie at Thorlabs to cqedgg: Thank you for noting your desire to directly connect FC/PC and FC/APC-terminated fiber patch cables with a mating sleeve. Unfortunately, we've done some research that indicates that currently there isn't a way to physically make a mating sleeve design that will enable this functionality. Given that a direct mating sleeve solution isnot currently feasible, we would typically suggest one of two options. If you already own the patch cables, you could consider purchasing the appropriate mating sleeves (you'll need one FC/PC to FC/PC version and one FC/APC to FC/APC version) and one of our hybrid patch cables: http://thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=5002&pn=P5-2000-PCAPC-1 Alternatively, if you do not already own the cables, Thorlabs does provide custom patch cable services, and we can make you a patch cable that has an FC/PC connector on one end and an FC/APC connector on the other. Our technical support staff would be pleased to provide a quote if you decide to go this route.
cqedgg  (posted 2011-09-29 17:18:04.0)
I need some FC/PC to FC/APC mating sleeves. You know, sometime we have the right componen but with a wrong connector.:(
bdada  (posted 2011-08-25 14:10:00.0)
Response from Buki at Thorlabs. Yes, we have a RoHS compatibility certificate for the ADAFC3 mating sleeve. I have included a link below and two ways you can access this information on our website: http://www.thorlabs.us/RoHS_cert.cfm?rohs=1&pn=ADAFC3 1. Click on the red icon to the left of the item number and then click on the RoHS icon: http://www.thorlabs.us/NewGroupPage9.cfm?ObjectGroup_ID=314&pn=ADAFC3 2. Click on the RoHS icon on the product page of the item: http://www.thorlabs.us/thorProduct.cfm?partNumber=ADAFC3
user  (posted 2011-08-25 10:13:57.0)
Is there a RoHS compliance certificate available for this item?
tor  (posted 2010-11-29 09:26:20.0)
Response from Tor at Thorlabs to 10210190049: Thank you for your interest in our FC to FC mating sleeves. The ADAFC2-PMN is ideal for PM applications, as it is designed with very tight tolerances.
10210190049  (posted 2010-11-28 09:09:48.0)
I have some fibers(P3-780PM-FC-2), which should be coupled. So which one should I use? ADAFC3 or ADAFC2-PMN?
Thorlabs  (posted 2010-08-31 10:53:06.0)
Response from Javier at Thorlabs to Jason: The clip material of the PFS01 wire saddle is nylon, which is not suitable for vacuum applications. Also, the adhesive will most likely outgas at vacuum levels below 10^-3 Torr.
jason.miura  (posted 2010-08-27 16:28:04.0)
I am interested in the PFS01 Fiber Clip. We are planning to do a vacuum test on our test setup that may include the fiber clips. What is the clip material and the adhesive used on the PFS01 Fiber Clip. Thanks, Jason
acable  (posted 2008-08-22 17:27:56.0)
Your FC to FC Mating sleave presentation is difficult to use, please consider breaking the 7 products into a couple of different sub-presentations. I would also appreciate having more detail on the Overview tab, key size, mounting hole pattern, and type of alignment sleave (metal or ceramic).
Back to Top

FC/PC-FC/PCアダプタ、ワイドキー用スロット付き

Wide Key Slot and Narrow Key
Click to Enlarge

ワイドキー用スロット付きアダプタとナローキーコネクタ:
ナローキーFC/PCコネクタで推奨
ナローキーFC/APCコネクタでは推奨しません
Wide Key Slot and Wide Key
Click to Enlarge

ワイドキー用スロット付きアダプタとワイドキーコネクタ:
全てのワイドキーコネクタでの使用に推奨
  • 2.2 mmのワイドキー用スロット付きアダプタ
  • 全てのFC/PCコネクタ付きファイバに対応する設計
  • 挿入損失<0.5 dB*(FC/PCコネクタ付きファイバSM600を使用して635 nmで測定)

ワイドキー用スロット付きアダプタADAFC2には貫通穴付きの正方形のフランジがあり、カスタムアセンブリやブランクパネルに取り付けることができます。ワイドキー用スロット付きアダプタADAFC1は、当社のファイバ接続パネルなど標準のラック取付け用パネルのD型穴に対応した設計です。図面と推奨する取付け穴パターンについては下の赤いアイコン(docs icon) をクリックしてご覧ください。こちらのアダプタは正方形フランジ用またはD型穴のL型ブラケットに取り付け可能です(下記参照)。ADAFC2はL型ブラケットをあらかじめ取り付けた状態でもご提供しています。

フラットFC/PCコネクタは、角度付きのFC/APCコネクタと比較してアライメントの影響をほとんど受けませんので、これらのワイドキー用スロット付きのアダプタは、ナローキーとワイドキーの両方のFC/PCコネクタと接続してお使いいただけます。しかしこれらのアダプタは、ナローキーFC/APCコネクタと機械的には接続できますが、ワイドキー用スロット付きであるため、角度付きナローキーFC/APCコネクタとのアライメント作業は難しくなります。このような理由でFC/APCコネクタでは、下記に掲載されているナローキー用スロット付きアダプタの使用をお勧めしています。当社標準品のFC/PC型とFC/APC型のパッチケーブルは全てナローキーコネクタです。

各アダプタには、コネクタを埃などの異物から保護するための保護キャップが2個付属しています。これらのキャップはご使用前には取り外してください。キャップのサイズはロットごとに異なる可能性がありますのでご注意ください。金属キャップCAPF1は、アダプタをL型ブラケット(下記掲載)に取り付けた状態でもご使用いただけます。

*注:偏波保持(PM)ファイバにご使用の場合、挿入損失が>1.0 dBとなります。PMファイバには、下記に記載されているPMファイバ用アダプタのご使用をお勧めします。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAFC2 Support Documentation
ADAFC2FC/PC-FC/PCアダプタ、ワイドキー:2.2 mm、正方形フランジ
¥1,792
Today
ADAFC1 Support Documentation
ADAFC1FC/PC-FC/PCアダプタ、ワイドキー:2.2 mm、D型穴
¥1,596
Today
Back to Top

FC/APC-FC/APCアダプタ、ナローキー用スロット付き

Narrow Key Slot and Narrow Key
Click to Enlarge

ナローキー用スロット付きアダプタとナローキーコネクタ:
全てのナローキーコネクタでの使用に推奨
  • 2.0 mmのナローキー用スロット付きアダプタ
  • 2.0 mmナローキーのFC/PCまたはFC/APCコネクタ付きファイバに対応する設計
  • 挿入損失<0.5 dB*(FCコネクタ付きファイバSM600を使用して635 nmで測定)

ナローキー用スロット付きアダプタADAFC3には貫通穴付きの正方形のフランジがあり、カスタムアセンブリやブランクパネルに取り付けることができます。ナローキー用スロット付きアダプタADAFC4は、当社のファイバ接続パネルなど標準のラック取付け用パネルのD型穴に対応した設計です。図面と推奨する取付け穴パターンについては下の赤いアイコン(docs icon) をクリックしてご覧ください。こちらのアダプタは正方形フランジ用またはD型穴のL型ブラケットに取り付け可能です(下記参照)。ADAFC3はL型ブラケットをあらかじめ取り付けた状態でもご提供しています。

これらのナローキー用スロット付きアダプタは、角度付きナローキーFC/APCコネクタと接続した時に適切なアライメントができます。これらのアダプタはナローキーFC/PCコネクタと機械的には接続できますが、フラットFC/PCコネクタはアライメントの影響をあまり受けませんので、上記掲載のワイドキー用スロット付きアダプタを代替品としてお使いいただくことが可能です。当社製造のFC/PC型とFC/APC型のパッチケーブルは全てナローキーコネクタです。

各アダプタには、コネクタを埃などの異物から保護するための保護キャップが2個付属しています。これらのキャップはご使用前には取り外してください。キャップのサイズはロットごとに異なる可能性がありますのでご注意ください。金属キャップCAPF1は、アダプタをL型ブラケット(下記掲載)に取り付けた状態でもご使用いただけます。

*注: 偏波保持(PM)ファイバにご使用の場合、挿入損失が>1.0 dBとなります。PMファイバには、下記に記載されているPMファイバ用アダプタのご使用をお勧めします。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAFC3 Support Documentation
ADAFC3FC/APC-FC/APCアダプタ、ナローキー:2.0 mm、正方形フランジ
¥3,467
Today
ADAFC4 Support Documentation
ADAFC4Customer Inspired! FC/APC-FC/APCアダプタ、ナローキー:2.0 mm、D型穴
¥2,377
7-10 Days
Back to Top

偏波保持ファイバ用アダプタ

Narrow Key Slot and Narrow Key
Click to Enlarge

ナローキー用スロット付き精密アダプタとナローキーコネクタ:
PMファイバ付きナローキーコネクタでの使用に推奨
Wide Key Slot and Wide Key
Click to Enlarge

ワイドキー用スロット付き精密アダプタとワイドキーコネクタ:
PMファイバ付きワイドーキーコネクタで推奨。
PMファイバ付きナローキーコネクタでは推奨しません。
  • 偏波保持ファイバ中の偏光軸を適切にマッチング
  • 2.0 mm精密ナローキーまたは2.2 mmの精密ワイドキーのFCコネクタ
  • 挿入損失 1.0 dB以下* (FC/PCコネクタ付きとFC/APCコネクタ付きのファイバPM630-HPを使用し635 nmで測定)

この偏波保持ファイバーアダプタの筺体は、通常の部品を2つ組み合わせたタイプとは異なり、単体の金属から出来上がっています。精密な構造であるため、偏光軸のマッチングが確実で、 FC/PCコネクタ付きまたはFC/APCコネクタ付きのPMファイバとの接続に適します。最適性能を得るには、お手元のコネクタのキー幅に合ったアダプタをお選びください。当社製造のFC/PCとFC/APCパッチケーブルは、全てナローキーコネクタです。

アダプタADAFCPM1とADAFCPM2には貫通穴付きの正方形フランジがついており、カスタムアセンブリやブランクパネル、または正方形フランジ用L型ブラケット(下記参照)に取り付け可能です。ナローキー用スロット付きアダプタADAFCPM3は、ファイバ接続パネルやD型穴付きL型ブラケット(下記参照) など標準的なラックマウントパネルのD型穴用に設計されています。 各偏波保持ファイバ用アダプタの図面、および取付側の穴パターン例(推奨例)については型番横の赤いアイコン(docs icon)をクリックしてご覧ください。 当社ではL型ブラケットに取り付けられたアダプタADAFCPM1と ADAFCPM2もご用意しております。

各アダプタには、コネクタを埃などの異物から保護するための保護キャップが2個付属しています。これらのキャップはご使用前には取り外してください。金属キャップCAPF1は、アダプタをL型ブラケット(下記参照)に取り付けた状態でもご使用いただけます。

*注: 偏波保持ファイバ以外のファイバをご使用の場合、上記に記載されている非偏波保持ファイバ用アダプタよりトレランスが大きくなるため、挿入損失は0.5 dB以下(典型値)となります。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAFCPM1 Support Documentation
ADAFCPM1FC/PC-FC/PCまたはFC/APC-FC/APCアダプタ、精密ワイドキー:2.2 mm
¥7,975
Today
ADAFCPM2 Support Documentation
ADAFCPM2FC/PC-FC/PCまたはFC/APC-FC/APCアダプタ、精密ナローキー:2.0 mm
¥7,975
Today
ADAFCPM3 Support Documentation
ADAFCPM3Customer Inspired! FC/PC-FC/PCまたはFC/APC-FC/APCアダプタ、精密ナローキー:2.0 mm、D型穴
¥7,975
Today
Back to Top

SMA-SMAアダプタ

Narrow Key Slot and Narrow Key
Click to Enlarge
SMA906型のコネクターフェルールはステップ型のため、SMA905型コネクタに接続する場合にはセラミック製のアライメントスリーブを使用する必要があります。
  • SMAコネクタ付きファイバの接続用
  • 挿入損失<1.5 dB(1対のØ200 µmコアのマルチモードファイバを接続した場合の損失の典型値)
  • 単品、または10個入りパックでご提供
  • 真空対応のSMA-SMAアダプタも下記にてご用意

アダプタADASMAは、エアスペース型のアダプタで2本のSMAコネクタ付きファイバを接続します。SMA905型コネクタ同士を直接接続することが可能で、SMA905型コネクタとSMA906型コネクタを接続するためのセラミックアライメントスリーブも1個付属しています。ADASMAは、SMA906型コネクタ同士を接続するのには向いていません。パネル取付け用のワッシャとナット、露出したアダプタ端部を保護するためのダストキャップ2個が付属しています。別売りで金属キャップCAPN1もご用意しています。これは、アダプタ端部の保護に使用できる他、L型ブラケットマウントにクリップで留めることも可能です。

このアダプタは、単品、または単品価格よりお得な10個入りパック(型番ADASMA-10)でご購入いただけます。各10個入りパックには、アダプタ10個、ワッシャ10個、ナット10個、アライメントスリーブ10個、ダストキャップ20個が付属しています。ADASMAはL型ブラケット取付け済みアダプタとしてもご提供しています。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADASMA Support Documentation
ADASMASMA-SMAアダプタ
¥2,603
Today
ADASMA-10 Support Documentation
ADASMA-10SMA-SMAアダプタ、10個入りパック
¥20,865
7-10 Days
CAPN1 Support Documentation
CAPN1Customer Inspired! SMAバルクヘッド&アダプタ用金属キャップ
¥822
Today
Back to Top

真空対応SMA-SMAアダプタ

Vacuum Compatibility Specifications
Vacuum Compatibility as Packageda10-10 Torr
Materials304 Stainless Steel
Preparation and PackagingChemically Cleaned and Double Vacuum Bagged
Stainless Steel Outgassing Rate at 20 °C1.8 x 10-8 Torr-Liters/s/cm2
  • 真空システムに部品を入れる前には、適切な手順でクリーニングを実施し、ベークアウトオーブンで予備加熱して水分や表面の揮発性物質を取り除いておくことをお勧めします。
Vacuum SMA Adapter Vent Hole
Click to Enlarge

ADASMAVにはØ1.6 mmの通気口が付いています。
  • 超高真空用途向けエアスペース型SMA-SMAアダプタ
  • SUS304ステンレススチール製
  • 挿入損失<1.5 dB(Ø200 µmコアのマルチモードファイバ同士を接続した場合の損失の典型値)
  • クリーンルーム用2重包装
  • 当社の真空対応マルチモードファイバーパッチケーブルに対応

当社のアダプタADASMAVはSMA-SMAアダプタADASMAの真空対応バージョンです。 SUS304ステンレススチール製のこのアダプタは、超高真空システム内 (>10-10 Torr)で使用できるよう設計されております。本体にあるØ1.6 mmの通気口により、コネクタ装着時に閉じ込められた空気を逃します(右の画像をご覧ください)。 ADASMAVは標準型とは異なり、SMA905式コネクタのみしか対応しません。 SUS304ステンレススチール製ワッシャならびにナットがカスタム仕様のマウント向けに付属しています。

その他の真空対応部品
当社のパッチケーブルのほとんどは真空対応向けに特別注文が可能です。 詳細は当社までお問い合わせください。

真空対応
当社の真空対応アダプタは、梱包前に化学洗浄され、真空での用途向けに処理されています。 10-10 Torrまでの真空状態では、袋から取り出してそのままお使いいただけます。 追加洗浄や加工によりさらに低い圧力での使用も可能です。ただし、ステンレススチールのアウトガスにより制限されます(上の表をご覧ください)。 実際に稼働されている真空システムに対して、これらの部品や材料については適正であるかの判断に関しては、ステンレススチールの材質特性とお客様が行われる洗浄方法により決定してください。 なお、真空用途向けではないキャップやパネルをADASMAVと共に使用することはお勧めしません。

この他にも真空用途でお使いいただける真空対応部品をご用意しております。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADASMAV Support Documentation
ADASMAV真空対応SMA-SMAアダプタ
¥4,352
7-10 Days
Back to Top

ST®/PC-ST/PCアダプタ

  • ST®*/PCコネクタ付きファイバに対応した設計
  • 3/8"-24 UNF-2Aネジ

アダプタADASTは、2本のST/PCコネクタ付きファイバを接続します。パネル取付け用に、3/8"-24 UNFナットとワッシャが付属しています。別売りで金属キャップCAPT1もご用意しており、露出したアダプタ端部の保護に使用できます。

ADASTはL型ブラケット付きでもご提供しています。

*ST®はLucent Technologies社の登録商標です。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAST Support Documentation
ADASTST/PC-ST/PCアダプタ
¥985
7-10 Days
CAPT1 Support Documentation
CAPT1Customer Inspired! STバルクヘッド&アダプタ用金属キャップ
¥707
7-10 Days
Back to Top

LC/PCおよびSC/PCアダプタ

  • SC/PCコネクタ付きまたはLC/PCコネクタ付きファイバ用に選択可能

アダプタADASC1は2本のSC/PCコネクタ付きファイバを接続し、ADALC1は2本のLC/PCコネクタ付きファイバを接続します。いずれのアダプタにもタブがあり、パネルに挿入されるとカチッと所定の位置に納まります。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADASC1 Support Documentation
ADASC1SC/PC-SC/PCアダプタ
¥2,930
Today
ADALC1 Support Documentation
ADALC1LC/PC-LC/PCアダプタ
¥2,930
Today
Back to Top

フェルールスリーブ

Fiber Mating Sleeve
Click to Enlarge
スリーブADAF1で2本のファイバーパッチケーブルを接続
  • Ø1.25 mmまたはØ2.5 mmフェルール付きファイバのいずれか同士を接続
  • 単品、または5個入りパックでご提供

当社のフェルールスリーブは、FC/PC、ST®*/PC、SC/PCコネクタのようなØ2.5 mmフェルール付きファイバ、またはLC/PCやMU/PCコネクタのようなØ1.25 mmフェルール付きファイバに使用できるよう設計されています。これらのスリーブは、右の写真のように2つのパッチケーブルの一時的な接続に使用することができます。セラミック製およびステンレス製のどちらのフェルールコネクタにも取付け可能です。また、当社のオプトジェネティクス用光ファイバーカニューラ,、オプトジェネティクス用パッチケーブル、およびセラミック製フェルールに取り付けることができます。

セラミック製スリーブは単品または5個入りパックでご用意しております。リン青銅製スリーブは5個入りパックでご用意しております。セラミックはオートクレーブでのクリーニングは容易ですが、リン青銅は若干可鍛性があり、下のグラフのようにセラミック製スリーブよりも弱い力で取外しが可能です。

Item # PrefixCompatible Ferrule SizeInsertion LossLengthDisconnect ForceComparison GraphsMaterial
ADAL11.25 mm Outer Diameter< 0.5 dB Typical (SM)a
< 1.0 dB Typical (MM)b
6.8 mm14.5 N (3.3 lbf) TypicalcCeramic (Zirconia)
ADAL47.1 N (1.6 lbf) TypicalcPhosphor Bronze
ADAF12.5 mm Outer Diameter< 0.2 dB Typical (SM)d
< 1.0 dB Typical (MM)e
11.4 mm15.8 N (3.5 lbf) TypicalfCeramic (Zirconia)
ADAF414.4 N (3.2 lbf) TypicalfPhosphor Bronze
  • LC/PCコネクタ付きファイバSM600を用いて、波長635 nmで試験
  • コア径Ø200 µm、NA 0.39のLC/PCコネクタ付きマルチモードファイバ、および波長617 nmのLED光源を用いて試験
  • LC/PCタイプのフェルールを用いて試験
  • FC/PCコネクタ付きファイバSMF28を用いて、波長1550 nmで試験
  • コア径Ø200 µm、NA 0.39のFC/PCコネクタ付きマルチモードファイバ、および波長617 nmのLED光源を用いて試験
  • FC/PCタイプのフェルールを用いて試験

*ST®はLucent Technologies社の登録商標です。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAL1 Support Documentation
ADAL1セラミック製割スリーブ、Ø1.25 mm フェルール(LC/PC)用
¥745
Today
ADAL1-5 Support Documentation
ADAL1-5セラミック製割スリーブ、Ø1.25 mm フェルール(LC/PC)用、5個入りパック
¥2,989
Today
ADAL4-5 Support Documentation
ADAL4-5Customer Inspired! リン青銅製割スリーブ、Ø1.25 mmフェルール(LC/PC)用、5個入りパック
¥1,956
Today
ADAF1 Support Documentation
ADAF1セラミック製割スリーブ、Ø2.5 mmフェルール(FC/PC、ST/PC、SC/PC)用
¥830
Today
ADAF1-5 Support Documentation
ADAF1-5セラミック製割スリーブ、Ø2.5 mmフェルール(FC/PC、ST/PC、SC/PC)用、5個入りパック
¥3,320
Today
ADAF4-5 Support Documentation
ADAF4-5Customer Inspired! リン青銅製割スリーブ、Ø2.5 mmフェルール(FC/PC、ST/PC、SC/PC) 用、5個入りパック
¥1,655
Today
Back to Top

FC/PC-SMAアダプタ

  • FC/PCコネクタ付きファイバとSMAコネクタ付きファイバを接続
    • 2.2 mmのワイドキーのFC/PCコネクタ
    • SMA905型のコネクタ

アダプタADAFCSMA1は、FC/PCコネクタ付きのシングルモード(SM)またはマルチモード(MM)のファイバと、SMAコネクタ付きMMファイバを、両方のファイバ先端を物理的に接触させることで接続します。 金属キャップCAPF1とCAPN1は、FCコネクタ用とSMAコネクタ用のアダプタ端部を各々保護する設計です。なおこのアダプタはSMA905型コネクタのみに対応します。

FC/PCコネクタ付きSMファイバを、SMAコネクタ付きMMファイバに接続した時の挿入損失の典型値は0.2 dB未満a、FC/PCコネクタ付きMMファイバを、SMAコネクタ付きMMファイバを接続した時の挿入損失の典型値は1.4 dB未満bです。

ADAFCSMA1は L型ブラケット付きでもご提供しています。

    • NA 0.12のFC/PCコネクタ付きSMファイバと、コア径Ø50 µmのSMAコネクタ付きMMファイバを接続して633 nmにて測定
    • FC/PCコネクタ付きMMファイバと、SMAコネクタ付きMMファイバを接続して633 nmにて測定。いずれのファイバもコア径Ø50 µm
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAFCSMA1 Support Documentation
ADAFCSMA1FC/PC-SMAアダプタ
¥7,162
Today
CAPF1 Support Documentation
CAPF1Customer Inspired! FC/PCおよびFC/APCバルクヘッド&アダプタ用金属キャップ
¥1,204
Today
CAPN1 Support Documentation
CAPN1Customer Inspired! SMAバルクヘッド&アダプタ用金属キャップ
¥822
Today
Back to Top

FC/PC-ST®/PCアダプタ

  • FC/PCコネクタ付きファイバとST®*/PCコネクタ付きファイバを接続
  • 挿入損失<0.28 dB(1対のSMファイバでの典型的な損失値)

アダプタADAFCST1は、FC/PCコネクタ付きのシングルモード(SM)またはマルチモード(MM)のファイバと、ST/PCコネクタ付きのSMまたはMMファイバを、両方のファイバ先端を物理的に接触させることで接続します。FC/PCコネクタ用に2.2 mmのワイドキー用スロットが付いており、カスタムアセンブリや当社のブランクパネル、あるいはM6規格のアセンブリに対応する正方形フランジ用L型ブラケット(下記参照)に取り付け可能です。図面と推奨する取付け穴パターンについては下の赤いアイコン(docs icon) をクリックしてご覧ください。

金属キャップCAPF1とCAPT1は別売りですが、FC/PCコネクタ用とST/PCコネクタ用のアダプタ端部をそれぞれ保護することができます。

*ST®はLucent Technologies社の登録商標です。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAFCST1 Support Documentation
ADAFCST1FC/PC-ST/PCアダプタ
¥2,003
Today
CAPF1 Support Documentation
CAPF1Customer Inspired! FC/PCおよびFC/APCバルクヘッド&アダプタ用金属キャップ
¥1,204
Today
CAPT1 Support Documentation
CAPT1Customer Inspired! STバルクヘッド&アダプタ用金属キャップ
¥707
7-10 Days
Back to Top

FC/PC-SC/PCアダプタ

  • FC/PCコネクタ付きファイバとSC/PCコネクタ付きファイバを接続
  • 挿入損失<0.11 dB(1対のSMファイバでの典型的な損失値)

アダプタADAFCSC1は、FC/PCコネクタ付きのシングルモード(SM)またはマルチモード(MM)のファイバと、SC/PCコネクタ付きSMまたはMMファイバを、両方のファイバ先端を物理的に接触させることで接続します。FC/PCコネクタ用に2.2 mmのワイドキー用スロットが付いており、貫通穴付きの正方形フランジは当社のブランクパネルまたは正方形フランジ用L型ブラケット(下記掲載)に取り付け可能です。図面と推奨する取付け穴パターンについては下の赤いアイコン(docs icon) をクリックしてご覧ください。

金属キャップCAPF1は別売りですが、露出したFC/PCコネクタ用のアダプタ端部を保護することができます。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADAFCSC1 Support Documentation
ADAFCSC1FC/PC-SC/PCアダプタ
¥2,003
Today
CAPF1 Support Documentation
CAPF1Customer Inspired! FC/PCおよびFC/APCバルクヘッド&アダプタ用金属キャップ
¥1,204
Today
Back to Top

バルクヘッドアダプタ

Bulkhead Adapters
Click to Enlarge

止めナットLN3824を組み込んだST/PCアダプタHAST
  • 組み込み用途(OEM用途)やカスタム用途に適した製品
  • 2.0 mmナローキー用スロット付きFC/PCバルクヘッドアダプタ
  • 2.2 mmワイドキー用スロット付きFC/PCバルクヘッドアダプタ
  • SMA905またはSMA906コネクタ対応SMAバルクヘッドアダプタ
  • ST/PCバルクヘッドアダプタと、対応する3/8"-24止めナット
  • 自由空間に光を出力

当社のバルクヘッドアダプタの片端はファイバーコネクタが取り付け可能で、組み込み用途(OEM用途)やカスタム用途に使用できるよう、出力側にはネジ加工が施してあります。光をファイバから自由空間のセットアップへ出力する必要のある用途に有用です。コネクターフェルールの前面と、アダプタの背面位置が揃う設計(右の写真参照)で、アダプタを取り付けた光学素子または機器に、ファイバを近接設置することができます。

Bulkhead Adapters
Click to Enlarge

SMAコネクタ付きファイバーパッチケーブルに取り付けたアダプタHASMA

FC/PCコネクタ付きパッチケーブルに対応するバルクヘッドアダプタを2種類ご用意しております。2.0 mmナローキーのスロット付きのHAFC2と、2.2 mmワイドキーのスロット付きのHAFCです。両アダプタにはFC/PCコネクタの反対側に長さ3.2 mmの3/8"-24外ネジがあります。カスタムアセンブリ用に3/8"-24タップ穴を加工するためのタップTAP3824をご用意しております。

アダプタHASMAの長さは9.65 mmで、SMA905ならびにSMA906コネクタ付きファイバーパッチケーブルを接続する際に使用する1/4"-36ネジ付きバレルが付いています。ネジ付きバレルは、固定ナットと共に使用すれば組み込み用(OEM用)またはカスタム仕様のシステムにも取り付け可能です。

アダプタHASTの長さは14.8 mmで、ST/PCコネクタ付きファイバーパッチケーブル向けです。長さ4.6 mmの3/8"-24外ネジが付いています。止めナットLN3824は、3/8"-24内ネジ付きで、組み込み用(OEM用)またはカスタム仕様のシステムに取り付けるために別途購入いただけます。アダプタHASTと止めナットLN3824は、10個入りでもご用意しています。

アダプタHAFC2、HAFC、HASMAはアダプタープレートに直接ねじ込むことができます。アダプタHASTを取り付けるには、まず止めナットLN3824をアダプタにねじ込みます(右上の写真参照)。止めナットが固定されたら、このアセンブリをネジ深さ2.54 mm以上、アダプタープレートにねじ込みます。アダプタHASTと止めナットLN3824をアダプタープレートに固定するときの最大トルクは0.86 N•mとなるよう設計されていることにご留意ください。

カスタム仕様のマウントを使用する際は、安定性を得るために最低でも2つのネジを使用し、恒久的に取り付けるときは、ネジロック(Loctite)を使用することをお勧めします。タップ穴を加工しない場合には、接着剤を用いてアダプタを固定することもできます。

カスタムまたは組み込み用途(OEM用途)の製品をご希望ではない場合、ネジ無しディスク、またはレンズチューブシステムに使用できるようにSMネジ付きディスクに取り付けたアダプタもご用意しています(上記参照)。 使用していないときにコネクタ付きファイバの損傷を防ぐためのファイバとバルクヘッドキャップも別途ご用意しております。 組み込み用途(OEM用途)に関するお問い合わせは当社までご連絡ください。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
HAFC2 Support Documentation
HAFC2FC/PCバルクヘッドアダプタ、ナローキー(2.0 mm)
¥2,833
Today
HAFC Support Documentation
HAFCFC/PCバルクヘッドアダプタ、ワイドキー(2.2 mm)
¥2,833
Today
HASMA Support Documentation
HASMASMAバルクヘッドアダプタ、止めナット付き
¥1,285
Today
HAST Support Documentation
HASTST/PCバルクヘッドアダプタ
¥1,154
7-10 Days
HAST-P10 Support Documentation
HAST-P10ST/PCバルクヘッドアダプタ、10個入り
¥11,179
7-10 Days
LN3824 Support Documentation
LN38243/8"-24止めナット
¥489
7-10 Days
LN3824-P10 Support Documentation
LN3824-P103/8"-24止めナット、10個入り
¥4,751
7-10 Days
Back to Top

FCアダプタ用L型ブラケット(アダプタ無し)

Item #ADABS1ADABS2ADABS3ADABD1ADABD2ADABD3
Sleeve TypeSquare FlangeD-Hole
L-Bracket TypeSingleDualQuadrupleSingleDualQuadruple
Compatible SleevesADAFC2
ADAFC3
ADAFCPM1
ADAFCPM2
ADAFCST1
ADAFCSC1
ADAFC1
ADAFC4
ADAFCPM3
  • 正方形フランジやD型穴用FCアダプタに対応
    (右表をご参照ください)
  • 1つ穴、2つ穴、または4つ穴でご用意
  • 1つ穴と2つ穴のブラケットには金属キャップCAPF1が1つまたは2つ付属

アダプタ無しのL型ブラケットは、当社のマウント無しFCアダプタを別途ご購入のお客様向けにご用意している製品です。これらを用いるとL型ブラケットのカスタマイズが可能で、例えば1つのL型ブラケットにナローキーコネクタとワイドキーコネクタをそれぞれ取り付けることができます。

L型ブラケットにはM6貫通穴が1つまたは2つあり、ポスト、光学テーブル、ブレッドボードなどに簡単に取り付けられます。すべてのL型ブラケットには、金属キャップCAPF1(別売りでもご用意)を固定するためのタップ穴(#4-40)が付いています。金属キャップCAPF1は1つ穴タイプには1つ、2つ穴タイプには2つ付属しています。

ADABS1、ADABS2ならびにADABS3には、正方形フランジアダプタを取り付けるためのネジ(#2-56)が付属します。交換用ネジ(型番 SH2S019)は50個入りパックをご用意しております。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
ADABS1 Support Documentation
ADABS1Customer Inspired! L型ブラケット(1つ穴)、正方形フランジ付きFCアダプタ用
¥3,825
Today
ADABS2 Support Documentation
ADABS2Customer Inspired! L型ブラケット(2つ穴)、正方形フランジ付きFCアダプタ用
¥5,168
Today
ADABS3 Support Documentation
ADABS3Customer Inspired! L型ブラケット(4つ穴)、正方形フランジ付きFCアダプタ用
¥7,979
Today
ADABD1 Support Documentation
ADABD1Customer Inspired! L型ブラケット(1つ穴)、D型穴付きFCアダプタ用
¥3,825
7-10 Days
ADABD2 Support Documentation
ADABD2Customer Inspired! L型ブラケット(2つ穴)、D型穴付きFCアダプタ用
¥5,168
7-10 Days
ADABD3 Support Documentation
ADABD3Customer Inspired! L型ブラケット(4つ穴)、D型穴付きFCアダプタ用
¥7,979
7-10 Days
Back to Top

屈折率マッチングジェル

Specifications
Refractive Index402 nm1.4995
589.3 nm1.4646
980 nm1.4462
1550 nm1.4378
Refractive Index Temperature
Coefficient (25 °C to 60 °C)
-3.5 x 10-4 per °C
Refractive Index vs. Wavelength
(Cauchy Fit)a
1.4338 + 10520 λ-2
Optical Absorption (450 - 750 nm) <0.003% per µm
Apparent Viscosity (25 °C)10,600 poises
Oil Separation (24 hrs at 100 °C)0.2%
Evaporation (24 hrs at 100 °C)1.0%
Specific Gravity (25 °C)1.06
Thermal Coefficient of Expansion0.0006 cc/cc/°C
Microscopic Particulate
Contamination
10 - 34 µm <300 Particles/cc
≥35 µm0 Particles/cc
Absorption Spectruminfo
  • 波長λの単位はnm

屈折率マッチングジェルG608N3は透明度の高いジェル状の光学結合に用いる化合物で、導波路の接合部での信号減衰を抑制します。2本のファイバの接合部に空気が存在すると、信号を伝搬する導波路と空気の間の光学的インピーダンスの差が大きいために、顕著な信号の屈折が生じます。

光学的結合に用いる化合物であるG608N3は、信号損失を最低限に抑えるために必要な光学的純度、透明度および屈折率を有し、かつ硬質な部品の間に柔軟な機械的接合状態を実現しています。硬質な光学的接着剤とは異なり、この柔らかいジェルには粘弾性があり、過度な応力や層間剥離を生じさせることなく、精密な光学部品間の熱膨張率の差を補うことができます。ファイバ先端の残留物はメタノールやイソプロピルアルコールを用いて取り除いてください。

この材質は多くのデバイスにおいて、周囲のホコリや液体から繊細な光学部品を保護する役割も果たします。このジェルは、清浄度が高く、黄変しない性質を有し、X線、紫外線や日光の影響を受けないように配合されています。ガスの放出量や揮発性が極めて低いので、光を吸収する微粒子を含有しません。この光学用途向け製品は、化学的に安定しており、無害で、幅広い温度範囲で有効で、高い信頼性や製品寿命が求められる用途に適します。

下表は、このジェルを用いた場合の信号損失の低減を表すデータです。1本のシリンジには、3 ccの屈折率マッチングジェルが入っています。このジェルはファイバースプライサーキットの補充にも使用いただけます。

Insertion Loss Improvement
Connector TypesLoss Without Index Matching Gel G608N3Loss With Index Matching Gel G608N3Difference
SMA-to-SMAa2.88 dB1.25 dB1.63 dB
FC/PC-to-FC/PCb1.12 dB0.59 dB0.53 dB
  • 617 nmのLED光源を使い、2本のNA 0.22のマルチモードのパッチケーブル(コア径がØ50 µmでクラッドがØ125 µm)を結合し、ジェルを使用した場合と使用しなかった場合を比較。
  • 780 nmのファイバ出力レーザ光源を使い、2本のFC/PCコネクタ付きファイバ780 HPを結合し、ジェルを使用した場合としなかった場合を比較。
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
G608N3 Support Documentation
G608N3屈折率マッチングジェル、3 cc、シリンジ
¥6,632
Today