小型アリ溝式直線移動ステージ(リニアステージ)、移動量12.7 mm


  • Modular, Compact Design
  • Lockable Moving Platform
  • Rapid, Smooth Positioning

DT12

Compact Dovetail Translation Stage

DT12B
Base Plate Included

Application Idea

A DT12 Stage with a DT12CTA Top Plate and CT101 Optic Mount

DT12XYZ

3-Axis Dovetail Translation Stage

DT12XY

2-Axis Dovetail Translation Stage

DT12RA

360° Rotation Adapter

DT12B
Base Plate Included

Related Items


Please Wait
DT12 Stage Specifications
Travel Range0.5" (12.7 mm)
Maximum LoadHorizontal: 2.5 lbs (1.2 kg)
Vertical: 0.55 lbs (0.25 kg)
Travel per Revolution0.014" (0.35 mm)
ConstructionAluminum with Precision Steel Leadscrew
Dimensionsa (Including Actuator)1.00" x 1.81" x 0.58" (25.4 mm x 45.9 mm x 14.8 mm)
Mounting Hole Threadingb8-32 (M4)
  • ステージDT12 1個の寸法
  • 最大ネジ深さ:3.5 mm

特長

  • 1軸およびXY、XZ、XYZ構成が可能
  • コンパクトな設置面積:25.4 mm x 45.9 mm
  • 滑らかな移動と長寿命を実現するアリ溝式機構
  • 固定可能な可動プラットフォーム
  • Ø12 mm~Ø12.7 mm(Ø1/2インチ)ポストに取付け可能

Click to Enlarge

DT12(/M)は、底部の#8-32(M4)タップ穴よりポストに取り付け可能

Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT121アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
RC11アリ溝式レールキャリア、25.4 mm x 25.4 mm、M6ザグリ穴付き
RLA03001アリ溝式光学レール、長さ3インチ (インチ規格)
SH8S0251#8-32ステンレススチール製キャップスクリュ、長さ1/4インチ、50個入り(インチ規格)
SD11ザグリ穴用アダプターリング、M4-M6、10個入り
View Metric Product List
型番数量Description
Metric Product List
DT12/M1アリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
RC11アリ溝式レールキャリア、25.4 mm x 25.4 mm、M6ザグリ穴付き
RLA075/M1アリ溝式光学レール、長さ75mm (ミリ規格)
SH4MS101M4 x 0.7ステンレススチール製キャップスクリュ、長さ10 mm、50個入り(ミリ規格)
SD11ザグリ穴用アダプターリング、M4-M6、10個入り
DT12(/M)をレールキャリアRC1に取り付け後、アリ溝式光学レールに取り付け

こちらのアリ溝式直線移動ステージ(リニアステージ)は小型かつ低位のポジショナで、スペースが限られた用途に適しています。各ステージの25.4 mm x 25.4 mmのプラットフォームが、精密M3 x 0.35アジャスタの使用により最大12.7 mm移動します。可動プラットフォームは、側面に位置する止めネジ(セットスクリュ)ならびに0.05インチ六角レンチで固定可能です。

ステージ底部のM4タップ穴からØ12 mm~Ø12.7 mm(Ø1/2インチ)ポストに取り付けが可能で、上部のM4タップ穴は光学部品、上部取付けプレート、またはアクセサリの取り付けに使用します。各ステージの上部と底部には取付け溝があり、別売りのクランプCL6を2個使用し、光学テーブルに取り付けることができます。

1軸およびXY、XZ、XYZのステージが構成可能です。XY構成については各軸の直交性を確保するため、組み立て済みの商品をご注文ください。組み立て済みの多軸ステージには、光学テーブル取付け用のベースプレートも付属します。

Dovetail Translation Stages
1/2" (12.7 mm) Travel
1" (25 mm) Travel
2" (50 mm) Travel

アクセサリ
上部取付けプレートアダプタは、M3ならびにM4タップ穴配列とキー溝により、当社の30 mmケージシステム用ステージアクセサリを取り付けます。ステージを光学テーブルに取り付けるスロット付きベースプレートは、すべての2軸および3軸構成ステージに付属していますが、1軸ステージ用に別売りでもご用意しております。直角ブラケットを用いてXZ、YZまたはXYZ構成を簡単に組立てることができます。回転アダプタを追加すれば、1軸ステージを360°回転固定可能です。また、60 mmケージロッドに取り付けるためのアダプタもご用意しております。


Posted Comments:
Guseon Kang  (posted 2024-01-16 19:30:49.07)
I would like to use the DT12 in an XY configuration. To do this, should I purchase two DT12s and connect them with an M4? A precise guide on the necessary components for setting up an XY configuration would be helpful. Conversely, is it possible to separate a DT12XY into two separate DT12 units for single-axis use each? Thank you
Michael Born  (posted 2023-07-06 18:04:19.557)
I have several DT12/M that I would like to use in vacuum (10^-3 or 10^-6mbar). Has anybody tried to disassamble, clean (ultrasonic bath) the translation stage and then apply Thorlabs Vacuum Grease or Thorlabs Apiezon Grease? Would this work? I want to XY position a 0.5" optical element in vacuum. A POLARIS-1XY solution would be larger and much more expensive...
fguzman  (posted 2023-07-10 10:11:30.0)
Thanks for your enquiry. Unfortunately these stages are not vacuum compatible, and disassembling them would void the warranty. Even if possible reassembling them, they would not give you the spec values stated on our website. I will contact you directly to discuss your application.
Chiara Toschi  (posted 2023-04-28 11:51:00.193)
I'm a postdoc at the University of Oxford and use your fantastic stage to position mice on a rig. We always want to position them in the same way however we have to change position for each mouse because each mouse is different (size-wise). It would be very useful to have a metric right next to the handles to be able to write down the coordinates of the position of each mouse, we now have to attach tape next to the handles to have a reference system of where the position of the animal was last time we trained. So I think it would just be super helpful to have printed on the stage metrics/numbers/reference points on the XYZ axes. Not sure if I explained this very well, let me know if you want a picture of we are doing.
fguzman  (posted 2023-05-03 07:06:46.0)
Hi Chiara, thanks for contacting Thorlabs. We are glad to see this stage is helping you in your research. We have taken note on your suggestion, thanks for sharing this idea. We have passed this to our engineers. I will contact you directly to further discuss your application.
David Gherardi  (posted 2019-06-11 12:11:32.747)
Hi Radu. Thanks for your response. I didn't explain myself very well. The tapped M4 holes on the DT12XYZ/M (and I assume the other stages of this type) are very shallow (spec = 3.6mm). Your posts come with a 12mm set screw which are spec'd to protrude a minimum 4.6mm from the post (too long for the 3.6mm hole). Not a big issue of course, just frustrating when you open a new stage and can't use it without ordering shorter screws.
rmiron  (posted 2019-06-12 05:12:09.0)
Dear David, thank you for clarifying the problem and for bringing it to our attention. I will see to it that we will start providing short screws with DT12XYZ(/M). Radu
David Gherardi  (posted 2019-06-07 04:30:13.42)
It would be good if the stages came with an appropriately short M4 screw(s) to enable mounting to standard 1/2" posts.
rmiron  (posted 2019-06-07 05:33:21.0)
Response from Radu at Thorlabs: Thank you for your feedback. The reason we don't supply M4 screws with these stages is because our 1/2" posts already come with an M4 screw. With that being said, such screws are easy to lose and additional ones would not hurt. I have relayed your message internally.
ludoangot  (posted 2018-11-08 18:00:34.333)
The DT12 is a great and convenient little stage for which I find many applications. One of the latest is to use it to add a translation axis to your XYFM1 (XYF1) target holder, making the holder a compact XYZ stage. Unfortunately both the target holder and the DT12 have threaded holes so alignment between the target holder and the stage required me to find a shim of the right thickness. What could be done to easily mount the DT12 on the XYFM1 (or XYF1)? I'm thinking of a mini mounting plate such as the DT12CTA but with counter bored holes, do you offer anything similar?
rmiron  (posted 2018-11-12 06:31:13.0)
Response from Radu at Thorlabs: Thank you for your feedback. An adaptor plate with a footprint that is larger than the dovetail stage's footprint would eliminate this problem. Until we add such a plate for DT12 in our product range, I recommend that you try using our universal base plate (UBP2).
cbrideau  (posted 2018-04-18 11:42:47.633)
Could the location information of the two countersunk screw holes be added to the drawings for the DT12A? I would like to use it to secure an LED assembly at an angle to one of these stages but the position of the two countersunk holes is not shown on the drawings.
bhallewell  (posted 2018-04-20 08:38:21.0)
Response Ben at Thorlabs: Thank you for your feedback response. I've passed your feedback onto our Engineers. I will contact you to advise you on the locations of the counterbored screw holes.
nkaddy  (posted 2017-02-22 04:53:50.66)
RE: DT12XYZ/M Just to be clear I will call the bottom translator Y, the middle X and front Z. Can you clarify if the X adjustment screw can be mounted onto the opposite side of the stage. As shown in the picture it is on the left. I need to have it on the right, because I want to put two of these next to each other and the micrometer screw would impede their closest placement (and access).
bhallewell  (posted 2017-02-24 07:00:42.0)
Response from Ben at Thorlabs: This is something that we could produce for you as a special. The stage will need to be aligned on a jig & glued in place during production. I will contact you directly to discuss a quote.
ludoangot  (posted 2016-10-24 14:51:30.9)
Hello, I've just received my DT12/M. The little trapezoidal plastic part at the end opposite to the knob has some rotational play, and when the stage is translated so that this plastic part is left exposed, this part have rotated and prevents (blocks) the stage from being translated back to its original position. This means that whenever I want to go past beyond this position I have to manually adjust the rotation position of the plastic part. Is this normal? Also when the DT12/M is used as illustrated on the images of this page (i.e. with the brass female thread on top), a clockwise rotation of the knob leads to the stage moving backward, which is rather unusual. Finally the DT12/M didn't come with the hex key as mentioned (but that is a minor issue).
bhallewell  (posted 2016-10-24 10:45:05.0)
Response from Ben at Thorlabs: Thank you for contacting us about this problem. This is certainly not typical behaviour & I will contact you directly to check the best way to get you a functioning stage. With regards to the included hex key, this is something that we no longer provide with this stage in an effort to reduce waste. Hex key kits can be purchased separately from the following webpage if these are needed. https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=1407 We will ensure that this reference to an included hex key is fixed within our product manual.
p.j.denissen  (posted 2016-04-23 11:42:43.01)
What is the required torque you have to expose to the lead screw and what is the play/accuracy of the stage?
cevered  (posted 2016-04-28 06:24:59.0)
Thanks for using our feedback tool. We will contact you via email directly with further information about DT12 specifications.
c.wilson  (posted 2013-05-01 02:14:08.217)
I hope I am not being silly, but I am confused by the application idea pictured above (showing the DT12/M dovetail stage connected to the RC1 rail carrier). How are the two connected together? The mounting hole on the RC1 is a M6 or M4 (with SD1 adapter ring). In the image this seems to be connected to the thru hole on the DT12/M, and not the M4 tapped hole!
sharrell  (posted 2013-05-01 09:03:00.0)
Response from Sean at Thorlabs: Thank you for your feedback. Both the top and bottom plates of the DT12/M have tapped M4 holes. The stage can therefore be attached as shown, as you described using an SD1 adapter ring to fit an M4 cap screw through the counterbore of the RC1 and into the bottom tapped hole on the DT12/M. I'm going to add a caption to the photo to explain this today, and I'll add additional photos and text to clarify the mounting options over the next several days.
lmorgus  (posted 2012-03-27 08:33:00.0)
A response from Laurie at Thorlabs to the anonymous poster: Thank you for inquiring about our customer inspired notation. You are indeed correct that the DT Series of stages have been part of our product line for many years (since 2007). The customer inspired designation is attributed to the DT12B/M, which is our metric base plate. Although its imperial counterpart, the DT12B, has also been around since 2007 and was originally sold as a universal product (it had imperial 6-32 taps that could accept both imperial and M3 screws), the solution wasn't ideal. Based on a customer request to make a truly metric baseplate, the DT12B/M was put into production and given the customer-inspired designation. We now ship all our metric DT Series stages with this new customer-inspired base plate.
user  (posted 2012-03-27 00:47:14.0)
You said these are "customer inspired" but, come on now, I've had parts exactly like these in my lab for many years so they really can't be customer inspired, right. You might be able to snow the young guys but we old guys know the truth.
bdada  (posted 2012-01-30 18:35:00.0)
Response from Buki at Thorlabs: The DT12/M has M4 mounting holes whereas the PH2/M has M6 so you cannot mount the PH2/M directly onto the DT12/M. Please consider using the AP6M4M adapter linked below and contact TechSupport@thorlabs.com if you have any questions: http://www.thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=1745&pn=AP6M4M
jmcrespoc  (posted 2012-01-29 11:03:19.0)
I want attach a PH2M post to this stage. Is this possible?
jjurado  (posted 2011-03-31 11:58:00.0)
Response from Javier at Thorlabs to Esteban Bermudez: Thank you very much for your feedback! You are correct, we should do a better job at specifying the screw sizes and hole dimensions of the DT12 series stages. To this end, we will modify the bill of materials of the DT12B base plate (included with the DT12XY/M) to include M3 attachment screws, and we will also add one M4 and one #8-32 countersunk screws for attaching the baseplate to the bottom of the stage. We will also update the drawings of these parts to make this information clearer. I will contact you directly in case you have any further questions.
esteban.bermudez  (posted 2011-03-31 12:10:47.0)
Hi, I received my DT12XY/M today and realized something until I got it. The description and drawings are not complete. For example it´s never mentioned the type of screw required for the base plate, and eventhough the screws are included(which now I know its M3?) the screws are not fiting well to the holes(they don´t screw smoothly). There should be a better description for this item. Cheers, Esteban
jens  (posted 2009-05-27 12:16:50.0)
A reply from Jens at Thorlabs: indeed this kind of miniature dovetail stage is offered by a few companies with very similar features. If you want to get a detailed comparison of spec values I will be happy to supply that based on any competitor item part number you are looking into. In a situation where the difference in the technical parameters is minor you also may want to take into account that we keep those items on stock for same day delivery. In addition we constantly add components to our portfolio to give you the highest possible flexibility in how to use and combine our items. So it might also be important to consider how the overall setup should look like and if you can get most or all those parts from one supplier which than will save you time and money.
user  (posted 2009-05-27 01:17:54.0)
Hey, I saw this exact same part from 2 other companys. Whats the difference? Why should I buy your instead of theirs.
jmyrick  (posted 2007-12-04 05:19:50.0)
There is nothing on this page that shows me what the function of the DT12XYZ-RA & DT12XYZ-RA/M, it would be great to see something that helps me to know what the part looks like. I also find the discription a little confusing what does "RA mounted" mean in the description?
jmyrick  (posted 2007-12-04 04:20:23.0)
Maybe a ghosted version of the cage rods showing the DT12CSA would help to make it more clear. I agree with ACable that the function is not obvious on the product page without having to go into the application tab.
technicalmarketing  (posted 2007-11-19 14:50:44.0)
To acable: Did you get a chance to look through the "Application Options" Tab? The DT12SCA is shown in a cage system, and the DT12RA is shown with a mounting base and lens mount. If these images are not helpful when it comes to addressing how these parts are used, please let us know.
acable  (posted 2007-11-17 12:41:22.0)
DT12SCA, it is not clear how this part is intended to be used, perhaps a photo with the unit placed in a cage system. It would also be nice if the distance from the top surface of the stage to the cage center line was included. DT12RA, same here, the part by itself doesnt allow the reader to understand its application.

手動リニアステージ

手動の移動ステージとして、最大移動量が6 mm以下から50 mmまでのステージをご用意しています。ステージの多くはXY軸やXYZ軸などの多軸構成での注文が可能です。ファイバ結合用としては、多軸ステージのページをご覧ください。標準の手動ステージを用いるよりも精密な調整が可能です。直線移動ステージのほかにも、回転ステージピッチ&ヨープラットフォームおよびゴニオメータもご用意しております。また、DCサーボモータ、ステッピングモータ、またはダイレクトドライブ技術を用いた電動移動ステージもご用意しています。

クロスローラーベアリングステージ

こちらの直線移動ステージの移動機構には、精密移動、高耐荷重、小角度偏差といった特性を有するクロスローラーベアリングが用いられています。LNRシリーズステージの本体はスチール製、LX、XRNおよびXRシリーズステージの本体はアルミニウム製です。当社ではクロスローラーベアリングを用いた垂直移動ステージもご用意しております(下記参照)。

Crossed-Roller Bearing Stages
Product FamilyLNR Series 25 mm Stages LX Series 25 mm
Stages
XRN Series 25 mm StagesXR Series 25 mm Stages XR Series 50 mm Stages LNR Series 50.8 mm Stages
Click Photo
to Enlarge
Travel25 mm (0.98")25 mm (0.98")25 mm (0.98")25 mm (0.98")50 mm (1.97")50.8 mm (2")
Drive TypeMultipleMicrometerMicrometerMicrometerMicrometerMultiple
Platform Size2.34" x 2.36"
(59.4 mm x 60.0 mm)
2.56" x 2.56"
(65.0 mm x 65.0 mm)
2.00" x 3.35"
(50.7 mm x 85.0 mm)
2.98" x 4.33"
(75.7 mm x 110.0 mm)
2.98" x 5.51"
(75.7 mm x 140.0 mm)
3.94" x 3.94"
(100.0 mm x 100.0 mm)
Possible Axis
Configurations
X, XZ, XY, XYZX, XY, XZ, YZ, XYZX, Y, Z, XY, XZ, YZ, XYZX, Y, Z, XY, XZ, YZ, XYZX, Y, Z, XY, XZ, YZ, XYZX, XY, XYZ
Additional Details

ボールベアリングステージ

こちらの移動ステージでは、精密移動と長寿命を実現するために、硬化スチール製リニアベアリングが用いられています。様々なアクチュエータが付いた製品や、1軸ステージや予め多軸ステージとして構築された製品をご用意しております。

Ball Bearing Stages
Product FamilyMS Series 1/4" StagesT12 Series 1/2" StagesMT Series 1/2" StagesPT Series 1" StagesLT Series 2" Stages
Click Photo to Enlarge
Travel1/4" (6.4 mm)1/2" (12.7 mm)1/2" (12.7 mm)1" (25.4 mm)2" (50 mm)
Drive TypeMultipleThumbscrewMultipleMultipleDifferential Micrometer
Platform Size1.17" x 1.17"
(29.7 mm x 29.7 mm)
0.76" x 0.81"
(19.3 mm x 20.6 mm)
2.40" x 2.41"
(61.0 mm x 61.2 mm)
3.00" x 4.00"
(76.2 mm x 101.6 mm)
3.75" x 3.75"
(95.3 mm x 95.3 mm)
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZX, XY, XYZX, XY, XYZX, XY, XYZ
Additional Details

アリ溝式ステージ

これらの小型ステージの移動機構にはアリ溝と送りネジが組み込まれています。一般的な移動制御用に適したステージです。

Dovetail Stages
Product FamilyDT Series 1/2" StagesDTS Series 1" Stages
(Vacuum-Compatible Version Available)
DTS Series 2" Stage
Click Photo to Enlarge
Travel1/2" (12.7 mm)1" (25 mm)2" (50 mm)
Drive TypeThumbscrewThumbscrewThumbscrew
Platform Size1.00" x 1.00" (25.4 mm x 25.4 mm)2.68" x 2.95" (68.0 mm 75.0 mm)2.68" x 3.74" (68.0 mm x 95.0 mm)
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZaX, XY, XYZ
Additional Details
  • The DTSA03 anodized angle bracket designed for XYZ configurations may also be used with the DTS25V(/M) vacuum-compatible stages; however, the DTSA03 is not vacuum-compatible.
  • The 1" (25 mm) travel DTS Series features an anodized DTS25(/M) stage and a DTS25V(/M) stage that is vacuum-compatible down to 10-6 Torr.

フレクシャーステージ

移動ステージNanoflex™には摩擦の無いフレクシャー機構が用いられており、ベアリングを用いた同様のステージと比較して位置決め性能と分解能が向上しています。ステージの移動は、取付けプラットフォームに取り付けられた連結部の弾性変形(たわみ)によって実現されています。多くのモデルには、微細な位置調整用にピエゾアクチュエータも付属します。 

Flexure Stages
Product FamilyNanoflex™ 1.5 mm StageNanoflex™ 5 mm Stages
Click Photo to Enlarge
Travel1.5 mm (0.06") + 25 µm Piezo5 mm (0.20")5 mm (0.20") + 20 µm Piezo
Drive TypeThumbscrew and Piezo ActuatorDifferential MicrometerDifferential Micrometer and
Open-Loop Piezo Actuator
Differential Micrometer and
Closed-Loop Piezo Actuator
Platform Size1.18" x 1.18" (30.0 mm x 30.0 mm)2.95" x 2.95" (75.0 mm x 75.0 mm)
Possible Axis ConfigurationsX, XY, XYZX, XY, XYZX, XY, XYZX, XY, XYZ
Additional Details

垂直移動ステージ

当社では精密移動用のクロスローラーベアリングを用いた垂直移動ステージや、高荷重用の長距離垂直移動ステージもご用意しております。 

Vertical Stages
Product FamilyXRN Series 9 mm Vertical StageXR Series 14 mm Vertical StageMVS Series 1/2" Vertical StageMVS Series 1" Vertical Stage VAP Series 4" Vertical StageVAP Series 10" Vertical Stage
Click Photo to Enlarge
Travel9.0 mm (0.35")14.0 mm (0.55")1/2" (13.0 mm)1" (25.0 mm)4" (101.6 mm)10" (254 mm)
Drive TypeWorm-Gear Driven Lift ScrewMicrometerAdjuster Knob and Coarse Manual Positioning
Platform Size2.00" x 2.00"
(50.7 mm x 50.7 mm)
2.98" x 2.98"
(75.7 mm x 75.7 mm)
2.36" x 2.36" (60.0 mm x 60.0 mm)3.00" x 6.00" (76.2 mm 152.4 mm)
Additional Details
Back to Top

1軸小型アリ溝式移動ステージ


Click to Enlarge

ステージDT12(/M)をベースプレートDT12B(/M)に取り付け(ベースプレートは付属しておりません)

Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT121アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
CL62テーブルクランプ、RLAシリーズ光学レール用
SH25S05011/4"-20ステンレススチール製キャップスクリュ、長さ1/2インチ、25個入り(インチ規格)
W25S05011/4インチワッシャ、M6対応、ステンレススチール製、100個入り
View Metric Product List
型番数量Description
Metric Product List
DT12/M1アリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
CL62テーブルクランプ、RLAシリーズ光学レール用
SH6MS101M6 x 1.0ステンレススチール製キャップスクリュ、長さ10 mm、25個入り(ミリ規格)
W25S05011/4インチワッシャ、M6対応、ステンレススチール製、100個入り
クランプCL6を2個使用し、ステージを光学テーブルブレッドボードに取り付けることができます。

Click for Details

DT12(/M)の図面

DT12/Mは、小型で移動量12.7 mmの移動ステージです。アリ溝と親ネジの移動機構により移動範囲全体に渡って滑らかな直線移動を行います。取付けプラットフォームは25.4 mm x 25.4 mmで、精密M3 x 0.35アジャスタで移動します。可動プラットフォームは、側面に位置する止めネジ(セットスクリュ)ならびに0.05インチ六角レンチで固定し、位置ずれを防止することができます。上部ならびに底部プレートにはM4タップ穴が付いていて、様々な取り付け方法に対応します。最大ネジ深さはどちらのタップ穴も3.5 mmです。

ステージDT12を2つまたは3つ使用した多軸ステージもご用意しております。下記をご参照ください。また、直角ブラケットDT12Aまたは回転アダプタDT12RA/Mを使用し、2つのステージDT12を垂直に取り付けることができます。 XY構成については各軸の直交性を確保するため、組み立て済みの商品をご注文ください。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
DT12 Support Documentation
DT12アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
¥12,653
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
DT12/M Support Documentation
DT12/Mアリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
¥12,653
Today
Back to Top

2軸小型アリ溝式移動ステージ


Click to Enlarge
移動ステージDT12XZ(/M)

Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT12XY1XYアリ溝式移動ステージ、移動量1/2インチ、ベース付属 (インチ規格)
RC11アリ溝式レールキャリア、25.4 mm x 25.4 mm、M6ザグリ穴付き
RLA06001アリ溝式光学レール、長さ6インチ (インチ規格)
SH8S0311#8-32ステンレススチール製キャップスクリュ、長さ5/16インチ、50個入り(インチ規格)
SD11ザグリ穴用アダプターリング、M4-M6、10個入り
View Metric Product List
型番数量Description
Metric Product List
DT12XY/M1XYアリ溝式移動ステージ、移動量12.7 mm、ベース付属 (ミリ規格)
RC11アリ溝式レールキャリア、25.4 mm x 25.4 mm、M6ザグリ穴付き
RLA150/M1アリ溝式光学レール、長さ150mm (ミリ規格)
SH4MS081 M4 x 0.7ステンレススチール製キャップスクリュ、長さ8 mm、50個入り(ミリ規格)
SD11ザグリ穴用アダプターリング、M4-M6、10個入り
DT12XY(/M)をレールキャリアRC1に取り付け後、アリ溝式光学レールに取り付け
  • 組み立て済み、2軸XYならびにXZ移動
  • 底部にØ12 mm~Ø12.7 mm(Ø1/2インチ)ポスト取付け用M4タップ穴
  • 上部に部品取付け用M4タップ穴
  • 各ステージにベースプレートDT12B/Mが付属
  • 移動軸は固定可能

DT12XY/MならびにDT12XZ/Mは、2軸の小型移動ステージです。アリ溝と親ネジの移動機構により各軸の移動範囲全体に渡って滑らかな直線移動を行います。DT12XY/MはステージDT12/Mが2つ、DT12XZ/MはステージDT12/Mが2つと直角ブラケットDT12Aが1つの構成になっております。各ステージには直接光学テーブルへの取り付けが可能となるベースプレートも付属します。XY構成については各軸の直交性を確保するため、組み立て済みの商品をご注文ください。尚、各ステージは取り外すことはできませんのでご注意ください。

組み立て済みの3軸ステージもご用意しております。下記をご参照ください。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
DT12XY Support Documentation
DT12XYXYアリ溝式移動ステージ、移動量1/2インチ、ベース付属 (インチ規格)
¥30,107
Today
DT12XZ Support Documentation
DT12XZXZアリ溝式移動ステージ、移動量1/2インチ、ベース付属 (インチ規格)
¥36,779
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
DT12XY/M Support Documentation
DT12XY/MXYアリ溝式移動ステージ、移動量12.7 mm、ベース付属 (ミリ規格)
¥30,107
Today
DT12XZ/M Support Documentation
DT12XZ/MXZアリ溝式移動ステージ、移動量12.7 mm、ベース付属 (ミリ規格)
¥36,779
Today
Back to Top

小型アリ溝式3軸移動ステージ


Click to Enlarge
直角ブラケットDT12A(/M)の代わりに回転アダプタDT12RA(/M)を使用(下記参照)
  • 組み立て済み、3軸XYZ移動
  • 底部にØ12 mm~Ø12.7 mm(Ø1/2インチ)ポストに取付け用M4タップ穴
  • 上部に部品取り付け用のM4タップ穴
  • ベースプレートDT12B/Mが付属
  • 移動軸は固定可能

DT12XYZ/Mは、小型の3軸移動ステージです。アリ溝と親ネジの移動機構により各軸の移動範囲全体に渡って滑らかな直線移動を行います。2軸ステージDT12XY/Mと、直角ブラケットDT12Aを用いて取り付けたステージDT12/Mで構成されています。ステージには直接光学テーブルへの取付けが可能となるベースプレートも付属します。尚、XY部分を形成する2つのステージは取り外すことはできませんのでご注意ください。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
DT12XYZ Support Documentation
DT12XYZXYZアリ溝式移動ステージ、移動量1/2インチ、ベース付属 (インチ規格)
¥49,312
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
DT12XYZ/M Support Documentation
DT12XYZ/MXYZアリ溝式移動ステージ、移動量12.7 mm、ベース付属 (ミリ規格)
¥49,312
Today
Back to Top

小型アリ溝式ステージ用上部プレート


Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT121アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
DT12CTA1DT12用上部プレート、#4-40および#8-32タップ穴(インチ規格)
CT1011Ø25 mm~Ø25.4mm(Ø1インチ)光学素子用マウント、30 mmケージシステム内CT1A/M、CT1P/M、またはMSステージ用
SH4S0251#4-40ステンレススチール製キャップスクリュ、長さ1/4インチ、50個入り(インチ規格)
View Metric Product List
型番数量Description
Metric Product List
DT12/M1アリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
DT12CTA1DT12用上部プレート、#4-40および#8-32タップ穴(インチ規格)
CT1011Ø25 mm~Ø25.4mm(Ø1インチ)光学素子用マウント、30 mmケージシステム内CT1A/M、CT1P/M、またはMSステージ用
SH3M061M3 x 0.5鋼合金製キャップスクリュ、長さ6 mm、50個入り(ミリ規格)
上部プレートDT12CTA(/M)と光学マウントCT101を取り付けたステージDT12(/M)

Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT12CTA1DT12用上部プレート、#4-40および#8-32タップ穴(インチ規格)
DT121アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
CT1041Ø12 mm~Ø12.7 mm(Ø1/2インチ)光学素子用回転マウント、30 mmケージシステム内CT1A/M、CT1P/M、またはMSステージ用
SH4S0251#4-40ステンレススチール製キャップスクリュ、長さ1/4インチ、50個入り(インチ規格)
View Metric Product List
型番数量Description
Metric Product List
DT12CTA/M1DT12/M用上部プレート、M3およびM4タップ穴(ミリ規格)
DT12/M1アリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
CT1041Ø12 mm~Ø12.7 mm(Ø1/2インチ)光学素子用回転マウント、30 mmケージシステム内CT1A/M、CT1P/M、またはMSステージ用
SH3M061M3 x 0.5鋼合金製キャップスクリュ、長さ6 mm、50個入り(ミリ規格)
上部プレートDT12CTA(/M)と光学マウントCT104を取り付けたステージDT12(/M)
  • M3タップ穴が12個、M4タップ穴が4個で、様々な取り付け方法に対応
  • 幅4 mmの中央のキー溝が30 mmケージシステム用ステージアクセサリをアライメント
  • プレート取り付け時、基準エッジとなる縁がミスアライメントを防止
  • 平坦度:0.05 mm
  • 平行度:0.05 mm
Item #DT12CTADT12CTA/M
Mechanical Drawing

上部プレートDT12CTA/Mには、多数のタップ穴と幅4 mmのキー溝が2本付いており、当社のアリ溝式移動ステージDT12/Mのラインナップに使用することにより、取付け方法を増やします。 2本の直交する キー溝によりØ12 mm~Ø12.7 mm光学素子用移動または回転マウントや、SM1ネジ付きマウントをはじめとする30 mmケージシステムステージアクセサリを 取り付けられます(右の写真参照)。取り付け時、光軸は、移動ステージのベースから38.5 mmの位置になります。プレートには、M3タップ穴が12個、M4タップ穴が4個ついており、様々な部品を固定します。寸法や取付け穴の位置については、表内の青いアイコンをクリックして図面をご覧ください。

上部プレートは、中央のM4ザグリ穴と付属のM4丸頭ネジでアリ溝式ステージDT12/Mに取り付けます。プレートの底に沿ってある縁が基準エッジとなり、ステージ取り付け時のプレートの不要な回転を防ぎます。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
DT12CTA Support Documentation
DT12CTACustomer Inspired! DT12用上部プレート、#4-40および#8-32タップ穴(インチ規格)
¥5,454
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
DT12CTA/M Support Documentation
DT12CTA/MCustomer Inspired! DT12/M用上部プレート、M3およびM4タップ穴(ミリ規格)
¥5,454
Today
Back to Top

小型アリ溝式ステージ用取付けアダプタ


Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT12A1直角ブラケット、DT12ステージ用
DT122アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
DT12B1ベースプレート、DT12ステージ用(インチ規格)
View Metric Product List
型番数量Description
Metric Product List
DT12A1直角ブラケット、DT12ステージ用
DT12/M1アリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
DT12B/M1ベースプレート、DT12ステージ用(ミリ規格)
直角ブラケットDT12Aが、ステージDT12(/M) 2つを垂直に取り付け。このXZ構成をさらにベースプレートDT12B(/M)に取り付けています。

Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT121アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
CL62テーブルクランプ、RLAシリーズ光学レール用
SH25S05011/4"-20ステンレススチール製キャップスクリュ、長さ1/2インチ、25個入り(インチ規格)
W25S05011/4インチワッシャ、M6対応、ステンレススチール製、100個入り
View Metric Product List
型番数量Description
Metric Product List
DT12/M1アリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
CL62テーブルクランプ、RLAシリーズ光学レール用
SH6MS251M6 x 1.0ステンレススチール製キャップスクリュ、長さ25 mm、25個入り(ミリ規格)
W25S05011/4インチワッシャ、M6対応、ステンレススチール製、100個入り
ステージはクランプCL6を2個使用して 光学テーブルブレッドボードに取り付け可能です。
  • 直角ブラケットDT12A:ステージDT12/M 2つを垂直に取り付け
  • ベースプレートDT12B/M:ステージを光学テーブルにボルトで固定する際に便利
  • テーブルクランプCL6:ステージDT12/Mを光学テーブルに固定

取付けアダプタは、簡単にステージDT12/M同士を組み合わせたり、ステージを光学テーブルまたはブレッドボードに取り付けます。

直角ブラケットDT12Aは、ミリ規格およびインチ規格ステージ共用で、2つのステージを互いに垂直に取り付けることができます。このブラケットは、ステージをXZ、YZまたはXYZ構成に組み立てる際に必要で、付属のM4皿ネジ2本を使用してステージに取り付けます。

ベースプレートDT12B/Mは、ステージを作業面にボルトで固定する際に便利です。まず付属のM6皿キャップスクリュを使用してベースプレートをテーブルに固定します。 その後付属のM3ボルトならびにクランプを使用してステージをベースプレートに固定します。

テーブルクランプCL6も、ステージを作業面に固定するのにご使用いただけます。 各ステージの上部と底部には取付け溝があり、クランプ2個を使用してステージを直接光学テーブルに取り付けます。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
DT12B Support Documentation
DT12Bベースプレート、DT12ステージ用(インチ規格)
¥4,802
7-10 Days
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
DT12A Support Documentation
DT12A直角ブラケット、DT12ステージ用
¥6,592
Today
CL6 Support Documentation
CL6テーブルクランプ、RLAシリーズ光学レール用
¥962
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
DT12B/M Support Documentation
DT12B/MCustomer Inspired! ベースプレート、DT12ステージ用(ミリ規格)
¥4,802
7-10 Days
Back to Top

小型アリ溝式ステージ用回転アダプタ


Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT12RA1回転アダプタ 、DT12ステージ用(インチ規格)
DT121アリ溝式移動ステージ、移動量1/2インチ、ベースは別売り(インチ規格)
DT12XY1XYアリ溝式移動ステージ、移動量1/2インチ、ベース付属 (インチ規格)
View Metric Product List
型番数量Description
Metric Product List
DT12RA/M1回転アダプタ、DT12ステージ用 (ミリ規格)
DT12/M1アリ溝式移動ステージ、移動量12.7 mm、ベースは別売り (ミリ規格)
DT12XY/M1XYアリ溝式移動ステージ、移動量12.7 mm、ベース付属 (ミリ規格)
回転アダプタDT12RA(/M)とステージDT12(/M)をステージDT12XY(/M)に取り付け

Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
LMR11Ø1インチ光学素子用レンズマウント、固定リング1個付属、#8-32タップ穴 (インチ規格)
DT12RA1回転アダプタ 、DT12ステージ用(インチ規格)
DT12B1ベースプレート、DT12ステージ用(インチ規格)
View Metric Product List
型番数量Description
Metric Product List
LMR1/M1Ø25 mm~Ø25.4 mm光学素子用レンズマウント、固定リング1個付属、M4タップ穴 (ミリ規格)
DT12RA/M1回転アダプタ、DT12ステージ用 (ミリ規格)
DT12B/M1ベースプレート、DT12ステージ用(ミリ規格)
レンズマウントLMR1(/M)を直角ブラケットを取り外した回転アダプタに取り付け、その後ベースプレートDT12B(/M)に取り付け
  • ステージDT12/MやM4ネジ穴から取り付けた部品を最大360º回転
  • 2つのステージDT12/Mを互いに垂直になるように取り付け
  • フレクシャークランプのロック機構

回転アダプタDT12RA/Mは、ステージDT12/MやM4ネジ穴から取り付けた部品を最大360o回転します。 アダプタには直角ブラケットが付いており、付属のM4皿ネジを使用し、既存の1軸、2軸または3軸ステージに簡単に取り付けられます(右の写真参照)。 回転はフレクシャークランプで固定します。締め付けには側面のM3キャップスクリュと2.5 mm六角レンチを使用します。取り付けに関する詳細は、マニュアルをご覧ください。下記の赤い資料アイコン()をクリックすると表示されます。

直角ブラケットは取り外し可能です。取り外してケージシステムアダプタDT12CSAを取り付けたり、ベースプレートDT12B/MまたはクランプCL6を2個使用してアダプタを直接作業面に固定することができます。右の写真では、レンズマウントLMR1(/M)を直角ブラケットを取り外した回転アダプタに取り付け、その後ベースプレートDT12B(/M)に取り付けています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
DT12RA Support Documentation
DT12RA回転アダプタ 、DT12ステージ用(インチ規格)
¥11,637
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
DT12RA/M Support Documentation
DT12RA/M回転アダプタ、DT12ステージ用 (ミリ規格)
¥11,637
7-10 Days
Back to Top

小型アリ溝式ステージ用60 mmケージシステムアダプタ


Click to Enlarge
View Imperial Product List
型番数量Description
Imperial Product List
DT12CSA1ケージシステムアダプタ、DT12ステージ用
DT12XY1XYアリ溝式移動ステージ、移動量1/2インチ、ベース付属 (インチ規格)
LCP33B160 mmケージ取付け用ブラケット
ER62Ø6 mmケージアセンブリーロッド、長さ 152.4 mm
TR61Ø1/2インチポスト、#8-32ネジ、1/4”-20タップ穴付き、長さ6インチ(インチ規格)
CT1011Ø25 mm~Ø25.4mm(Ø1インチ)光学素子用マウント、30 mmケージシステム内CT1A/M、CT1P/M、またはMSステージ用
DT12CTA1DT12用上部プレート、#4-40および#8-32タップ穴(インチ規格)
SH8S0251#8-32ステンレススチール製キャップスクリュ、長さ1/4インチ、50個入り(インチ規格)
SH4S0251#4-40ステンレススチール製キャップスクリュ、長さ1/4インチ、50個入り(インチ規格)
View Metric Product List
型番数量Description
Metric Product List
DT12CSA1ケージシステムアダプタ、DT12ステージ用
DT12XY/M1XYアリ溝式移動ステージ、移動量12.7 mm、ベース付属 (ミリ規格)
LCP33B160 mmケージ取付け用ブラケット
ER62Ø6 mmケージアセンブリーロッド、長さ 152.4 mm
TR150/M1Ø12.7 mmポスト、M4ネジ、M6タップ穴付き、長さ150 mm(ミリ規格)
CT1011Ø25 mm~Ø25.4mm(Ø1インチ)光学素子用マウント、30 mmケージシステム内CT1A/M、CT1P/M、またはMSステージ用
DT12CTA/M1DT12/M用上部プレート、M3およびM4タップ穴(ミリ規格)
SH4MS061M4 x 0.7ステンレススチール製キャップスクリュ、長さ6 mm、50個入り(ミリ規格)
SH3M061M3 x 0.5鋼合金製キャップスクリュ、長さ6 mm、50個入り(ミリ規格)
DT12CSAとステージDT12XY(/M)を2本のØ6.0 mmケージロッドに取り付け

Click to Enlarge
ステージDT12(/M)を60 mmケージアダプタDT12CSAに取り付け
  • ステージDT12/Mや回転アダプタDT12RA/Mを60 mmケージシステム内に取り付け
  • ケージロッドに沿って粗移動が可能
  • 側面のM3ナイロンチップ付き止めネジ(セットスクリュ)2個で固定可能

60 mmケージシステムアダプタDT12CSAは、移動ステージDT12/Mや回転アダプタDT12RA/Mを右端の写真のように2本のØ6.0 mmケージロッドに取り付けます。アダプタはケージロッドに沿って粗移動し、M3ナイロンチップ付き止めネジ2個と1.5 mm六角レンチで固定できます。

ステージDT12(/M)は、M4皿ネジを使用して取り付けます(右の写真参照)。回転アダプタDT12RA/Mの取り付けにはM4キャップスクリュを使用します。DT12CSAにはすべての取付けネジが付属しています。なお、回転アダプタDT12RA/Mについては、直角ブラケットを取り外してから60 mmケージアダプタDT12CSAに取り付けてください。

60 mmケージシステム内に取り付ける際、上面からケージシステムの中心線までの距離は、ステージDT12/Mの場合約23.2 mm、回転アダプタDT12RA/Mの場合約29.5 mmとなります。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
DT12CSA Support Documentation
DT12CSAケージシステムアダプタ、DT12ステージ用
¥7,201
Today