支柱フレーム、剛性、軽量、除振無しタイプ

- Support Frame with All-Steel Construction
- Sorbothane Damping Pads Between Tabletop and Frame
- Casters Included
- Under Shelf Also Available
PFM52501
Support Frame for 600 mm x 900 mm Breadboard
Caster and Leveling Foot
PWA100
Under Shelf
PFM52501
with Breadboard Installed
(Breadboard Sold Separately)

Please Wait
Item # | PFM52501 | PFM52502 | PFM52503 | PFM52504 |
---|---|---|---|---|
Compatible Breadboard Dimensionsa | 600 mm x 900 mm (2' x 3') | 600 mm x 1200 mm (2' x 4') | 750 mm x 900 mm (2.5' x 3') | 750 mm x 1200 mm (2.5' x 4') |
Compatible Under Shelf | PWA100 | PWA110 | PWA100 | PWA110 |
Frame Height | 727 mm (28.62") | |||
Outer Frame Dimensionsb | 590 mm x 890 mm (23.23" x 35.04") | 590 mm x 1190 mm (23.23" x 46.85") | 740 mm x 890 mm (29.13" x 35.04") | 740 mm x 1190 mm (29.13" x 46.85") |
Frame Mass (Weight)c | 52 kg (115 lbs) | 57 kg (126 lbs) | 56 kg (123 lbs) | 61 kg (134 lbs) |
Maximum Total Loadd | 200 kg (441 lbs) | |||
Frame Material | Steel |
特長
- オールスチール構造
- キャスタとレベル調整用脚付属
- 完全組立後に発送
- ミリ規格とインチ規格両方のブレッドボードに対応
- ブレッドボードとフレームの間の緩衝用のソルボセインパッド
- 別売りでアンダーシェルフもご用意
PFMシリーズの支柱フレームは、軽量、かつ頑強で比較的小型な光学ブレッドボード用の支柱として設計されています。フレームは除振性能のあるソルボセインパッ ド付のオールスチール製で、光学ブレッドボードに対応する優れた台となります(対応するブレッドボードについては、「ブレッドボード」 タブをご覧ください)。
フレームには、光学ブレッドボードやその上の光学部品を動かさずにフレームを動かすことができるようにキャスタが付いてきます。フレームを希望の位置にセットし、4本のレベル調整脚を下してテーブルを水平にし、キャスタを床から離すことができます。これらの支柱フレームは完全に組み立てられた状態で発送されます。別売りでアンダーシェルフもご用意しております。
PFM52501用推奨ブレッドボードとアンダーシェルフ
Breadboard | Dimensions | Unpackaged Mass (Weight)a | Tapped Holes | Compatible Under Shelf |
---|---|---|---|---|
MB2436 | 24" x 36" x 0.5" | 18 kg (40 lbs) | 1/4"-20 Taps on 1" Centers | PWA100 |
MB6090/M | 600 mm x 900 mm x 12.5 mm | 18 kg (40 lbs) | M6 Taps on 25 mm Centers | |
PBG2436F | 24" x 36" x 0.98" | 15.8 kg (34.8 lbs) | 1/4"-20 Taps on 1" Centers | |
PBG12106 | 24" x 36" x 2.2" | 16 kg (35 lbs) | 1/4"-20 Taps on 1" Centers | |
PBG6090A | 600 mm x 900 mm x 25 mm | 15.3 kg (33.7 lbs) | M6 Taps on 25 mm Centers | |
PBG52506 | 600 mm x 900 mm x 55 mm | 16 kg (35 lbs) | M6 Taps on 25 mm Centers |
PFM52502用推奨ブレッドボードとアンダーシェルフ
Breadboard | Dimensions | Unpackaged Mass (Weight)a | Tapped Holes | Compatible Under Shelf |
---|---|---|---|---|
MB2448 | 24" x 48" x 0.5" | 24 kg (53 lbs) | 1/4"-20 Taps on 1" Centers | PWA110 |
MB60120/M | 600 mm x 1200 mm x 12.5 mm | 24 kg (53 lbs) | M6 Taps on 25 mm Centers | |
PBG2448F | 24" x 48" x 0.98" | 20.9 kg (46.1 lbs) | 1/4"-20 Taps on 1" Centers | |
PBG11107 | 24" x 48" x 0.98" | 20.5 kg (45 lbs) | 1/4"-20 Taps on 1" Centers | |
PBG60120A | 600 mm x 1200 mm x 25 mm | 20.3 kg (44.8 kg) | M6 Taps on 25 mm Centers |
PFM52503用推奨ブレッドボードとアンダーシェルフ
Breadboard | Dimensions | Unpackaged Mass (Weight)a | Tapped Holes | Compatible Under Shelf |
---|---|---|---|---|
PBG3036F | 30" x 36" x 0.98" | 19.6 kg (43.2 lbs) | 1/4"-20 Taps on 1" Centers | PWA100 |
PBG11110 | 30" x 36" x 0.98" | 16 kg (35 lbs) | 1/4"-20 Taps on 1" Centers | |
PBG7590A | 750 mm x 900 mm x 25 mm | 19.0 kg (41.9 lbs) | M6 Taps on 25 mm Centers | |
PBG12110 | 30" x 36" x 2.2" | 21 kg (44 lbs) | 1/4"-20 Taps on 1" Centers | |
PBG52510 | 750 mm x 900 mm x 55 mm | 20 kg (44 lbs) | M6 Taps on 25 mm Centers |
PFM52504用推奨ブレッドボードとアンダーシェルフ
Breadboard | Dimensions | Unpackaged Mass (Weight)a | Tapped Holes | Compatible Under Shelf |
---|---|---|---|---|
PBG3048F | 30" x 48" x 0.98" | 26.0 kg (57.3 lbs) | 1/4"-20 Taps on 1" Centers | PWA110 |
PBG75120A | 1200 mm x 750 mm x 25 mm | 25.2 kg (55.6 lbs) | M6 Taps on 25 mm Centers | |
PBG52511 | 1200 mm x 750 mm x 55 mm | 26.5 kg (59 lbs) | M6 Taps on 25 mm Centers | |
PBG12111 | 30" x 48' x 2.2" | 27 kg (60 lbs) | 1/4"-20 Taps on 1" Centers |
上記のテーブルのほかに、当社では、多くの用途に対応するブレッドボードを多数ご用意しています。このブレッドボードの多くはPFMシリーズのフレームでご用意可能です。ただし、このフレームの推奨最大許容荷重(フレーム、ブレッドボード、およびブレッドボード上の他の全てのアイテムを含む)は200 kgです。
Posted Comments: | |
user
 (posted 2022-07-10 02:06:40.82) It is possible to a 600 x 600 mm board on the 600 x 900 mm support frame? cwright
 (posted 2022-07-12 06:42:15.0) Response from Charles at Thorlabs: Thank you for contacting us. The breadboards are not fixed to the frame as their weight is sufficient to hold them in place. So, while the 600 x 600 breadboard would physically fit on the frame, it would need to rest across the pads at one end and at the centre, and it would not be centred on the frame. The reduced weight would also make it less secure. Domantas Berenis
 (posted 2020-05-26 05:13:57.423) Hello,
I am curious if sorbothane damping pads between tabletop and the frame are single use or reusable?
At our laboratory few of these frames are used to hold wooden tabletops and now we have the need to exchange them to aluminum ones. So Is there a possibility to do that without harming the pads?
Or if the pads will be harmed - is there a possibility to buy new ones? DJayasuriya
 (posted 2020-05-26 10:50:33.0) Thank you for your inquiry. Yes these are reusable. If the pads gets damaged while changing we would be able to supply spares. DJayasuriya
 (posted 2020-05-26 10:50:33.0) Thank you for your inquiry. Yes these are reusable. If the pads gets damaged while changing we would be able to supply spares. Silvano.Uribe
 (posted 2015-08-26 12:40:11.6) Is there any way to get one of these stands with a custom height? I have a board (PBG12106 - UltraLight Series II Breadboard, 36" x 24" x 2.2", 1/4"-20 Taps) that needs to be raised a maximum of 47" and is adjustible down anywhere between 1/4"-1/2". rcapehorn
 (posted 2015-08-28 11:47:07.0) Response from Rob at Thorlabs: Thank you for your interest in our breadboard frames. Unfortunately at this time we cannot offer customised versions of our PFM range. We can however offer customised versions of our upgraded ridged frame series, PFR, found here - http://www.thorlabs.de/newgrouppage9.cfm?objectgroup_id=1871. The maximum height we can offer for this range is 1000mm. If you would be interested in a quotation for one of these custom frames, please contact our Technical Support team with your request - techsupport@thorlabs.com. david.gherardi
 (posted 2014-11-26 11:21:43.727) Is there any way to securely attach a breadboard (eg MB6090/M) to one of these frames (eg PFM52501)? The overview suggests that the breadboard only rests upon Sorobothan pads. Although I can see how this approach may be suitable in a 'controlled' lab environment, in more chaotic enivornments (eg a production line) it can be more important for everything to be firmly bolted together and secure. cdaly
 (posted 2014-11-26 04:49:25.0) Response from Chris at Thorlabs: No, there is no way to fix a breadboard to these frames as they are. They are only intended to have the board rest on top. tor
 (posted 2011-01-10 14:13:38.0) Response from Tor at Thorlabs to Matt: Thank you for your interest in our MB2424 and our PFM52502. Please note that the breadboard is designed to rest on the Sorbothane pads on the frame, so relative motion between the two breadboards must be considered in choosing these over the MB2448. The hole patterns for the breadboards can be viewed in the AutoCAD PDFs: http://www.thorlabs.com/Thorcat/6200/6279-E0W.pdf http://www.thorlabs.com/Thorcat/14000/14052-E0W.PDF
The 1/4"-20 taps on 1" centers would have the same spacing in this configuration. matt.giacalone
 (posted 2010-12-15 15:36:54.0) I am buying (2) MB2424 to bolt up to a pfm52502 frame table. Im assuming (2) 2 x 2 plates will bolt up the same as a 4 x 2 plate?
What is the bolt pattern dimensions of the table?
Thank you,
Matt |

Specifications | |||
---|---|---|---|
Item # | Shelf Depth | Shelf Width | Compatible Frames |
PWA100 | 400.0 mm (15.75") | 896.0 mm (35.28") | PFM52501, PFM52503 |
PWA110 | 1196.0 mm (47.09") | PFM52502, PFM52504 |
- 上記掲載の軽量ワークステーション用シェルフ
- 頑丈なメラミン化粧板付き中密度繊維板(MDF)構造
- 広いシェルフ奥行:400.0 mm
- 最大許容荷重:50 kg
これらの大型アンダーシェルフは支柱フレームの後方に取り付けることで、フレーム前でのお客様の動きを妨げることなく奥行の深いシェルフをご提供します。 このシェルフを使用することにより、フレームの後方ならびにサイド部分に十分な保管場所ができます。またコントローラや電源などの重量のある機器を保管できるので、作業面をすっきりさせることができます。 シェルフの幅は各フレームの幅に対応しています。 また、シェルフには取付け用ブラケットおよび必要な全てのネジが付属しています。 詳しい取付け方法は、下の赤いアイコン()をクリックして表示されるマニュアルをご覧ください。