直角取付けアダプター


  • Stably Mount Small or Large Optomechanics at 90°
  • Slotted, Counterbored, and Tapped Holes Enable
    Virtually Any Configuration

AP90L

Large Right-
Angle Plate

RM1F

1/4"-20 Tapped
Construction Cube

AB90CV

Vacuum-Compatible
Right-Angle Bracket with 1/4" (M6)
Counterbored Slot and 1/4"-20 Taps

AB90E

Right-Angle Bracket with 1/4" (M6)
Counterbored Slot and 8-32 Taps

TS240

Tombstone Mounting Block

Application Idea

VB01 Brackets Hold Large
Breadboards at 90º

AP90

Right-Angle Plate

Related Items


Please Wait

直角取付けアダプタは、頑丈な立体的光学系の構築をサポートし、また様々な大きさの光学系に適します。マウント済みオプトメカニクスに直接取付けられ、またより大型構造の支えとしてもお使いいただけます。こちらのページにあるすべての製品は単一アルミニウムブロックから機械加工され、精密さに優れ、剛性を備えています。また、真空対応タイプの直角ブラケット(M6キャップスクリュ対応)もございます。

当社では、そのほかにも様々な直角取付けを要する用途向けに角度調整プレート開口部付き直角ブラケットや、30°、45°、60°の角度付き取付けプレートをご用意しています。また、Ø12 mm~Ø12.7 mm(Ø1/2インチ)ポスト用角度クランプØ25 mm~Ø25.4 mm(Ø1インチ)ポスト用直角クランプもご用意しています。

TS240 SmartPack Packaging
Click to Enlarge

Updated TS240 Packaging
Smart Pack

Smart Pack Goals

  • Reduce Weight of Packaging
  • Increase Usage of Recyclable Materials
  • Improve Packing Integrity
  • Decrease Shipping Costs

Thorlabs' Smart Pack Initiative is aimed at minimizing waste while providing adequate protection for our products. By eliminating any unnecessary packaging, implementing design changes, and utilizing eco-friendly materials, this initiative seeks to reduce the environmental impact of our product packaging. 

The updated TS240 and TS240/M packaging consists of recycled cardboard and weighs 6.7% and 14.7% less, respectively, than the original packaging. This weight change results in a respective 0.86 kg and 1.85 kg reduction in travel-based CO2 emissions per year, based on typical product sales. The other products on this page have transitioned, or are in the process of transitioning to recycled paper packaging.

As we move through our product line, we will indicate re-engineered, eco-friendly packaging with our Smart Pack logo, which can be seen above.


Posted Comments:
Jeff Secor  (posted 2024-01-04 09:51:03.81)
Need vertical supports 300-500 mm tall. Your products do not have good structure when mounted on vertical rails
jpolaris  (posted 2024-01-04 06:19:59.0)
Thank you for contacting Thorlabs. I have reached out to you directly to get clarification on the issue with structure of TS240 that you have found, as well as to work out a potential solution with you.
z lucky  (posted 2023-01-31 18:37:15.27)
Why don't you just give simple dimension on the product like height and width. without having to go to all the other precedures.
jdelia  (posted 2023-02-01 10:22:42.0)
Thank you for contacting Thorlabs. The length, width, and height of the AP90 bracket can be found readily available under the "Overview" section of our product family page.
David Moy  (posted 2021-06-23 11:17:22.987)
We would like a version of this bracket where the 3 holes in the bottom (shortest) leg of the bracket are replaced with a single slot.
YLohia  (posted 2021-06-28 11:18:44.0)
Hello, custom products can be requested by clicking on the "Request Quote" button above or by contacting your local Thorlabs Tech Support group. We will discuss the possibility of offering this directly.
Mark Vervest  (posted 2020-07-29 15:39:26.213)
There is an inconsistency. The title/label of this item says "M6 Tapped Holes" but the technical PDF drawing says "M6X1.0-6H THRU".
llamb  (posted 2020-07-31 02:42:51.0)
Thank you for your feedback on the AB90A/M. The holes are indeed tapped with an M6 x 1.0 thread, as opposed to smooth Ø6 mm holes, and they pass THRU the entire material's thickness, as opposed to being blind holes of a finite depth. We will consider clarifying these call-outs.
gergely.ercsey  (posted 2016-07-07 13:08:34.17)
Dear Madam/Sir! The holes should be in exact distance from the bottom. For example the first hole's axis distance from the bottom should be in 20mm. Best Regards, Gergely Ercsey
tcohen  (posted 2012-06-15 18:57:00.0)
Response from Tim at Thorlabs: Thank you for sharing this idea with us! We would like to send you some complementary pieces for your feedback. We will also update this page to indicate that they were customer inspired.
patrick.berry  (posted 2012-06-15 15:15:36.0)
I see you now have added the brackets I designed to the catalog! I will definitely be buying many of these!
tcohen  (posted 2012-04-26 18:00:00.0)
Update from Tim at Thorlabs to the customer who couldn’t consistently fit the washer onto the XE25A90: Your suggestion led to an updated design that solved this problem. Thank you for your feedback!
bdada  (posted 2012-03-13 11:49:00.0)
Response from Buki at Thorlabs to lujun0260: Thank you for your feedback. It sounds like you want pricing for our products but we already include that information on our website. I have contacted you to learn more about what you require.
lujun0260  (posted 2012-03-10 06:21:00.0)
please price list
tcohen  (posted 2012-02-28 09:22:00.0)
Response from Tim at Thorlabs: Thank you for your valuable feedback on the XE25A90. We do not have your email to contact you, but if you would like help or to further discuss the problem, please contact us at techsupport@thorlabs.com.
user  (posted 2012-02-25 11:51:39.0)
Can't consistantly fit washer on XE25A90 - XE25-Series Right Angle Bracket.
Thorlabs  (posted 2010-11-03 13:29:20.0)
Response from Javier at Thorlabs to Patrick. Thank you for your feedback. I will contact you directly to get details about your application. We can discuss the possibility of custom making this part and/or potentially adding it to our catalog.
patrick.berry  (posted 2010-11-03 09:27:57.0)
It would be nice if you had some 90 degree brackets available which were the size of the AB90 but had 1/4-20 threaded holes on one or both sides. It would also be nice to have one that was half as wide, possibly with one counterbored 1/4-20 and one threaded on each side.
klee  (posted 2009-09-14 17:15:44.0)
A response from Ken at Thorlabs to sabba_yoni: We do not have any angle bracket that is smaller than the AB90. However, we can custom make one if you can send us a sketch or drawing.
sabba_yoni  (posted 2009-09-14 15:46:52.0)
i need a small "angle bracket" , like 1.5*1 inch did you have something like that?
Back to Top

直角ブラケット、M6キャップスクリュ用

Product Image
(Click to Enlarge)
AB90AB90HAB90A(/M)AB90B(/M)AB90C(/M)
Item #AB90AB90HAB90A(/M)AB90B(/M)AB90C(/M)
Counterbored Mounting SlotsTwo 1/4" (M6) SlotsN/AOne 1/4" (M6) Slot
Counterbored Mounting HolesN/ATwo 1/4" (M6) HolesN/A
Tapped HolesNoneSix 1/4"-20 (M6)
Holes per Side
Two 1/4"-20 (M6)
Holes per Side
Three 1/4"-20 (M6)
Holes on One Side
Dimensions (L x W x H)
[Click for Mechanical Drawing]
2.00" x 1.50" x 2.00"
(50.8 x 38.1 x 50.8 mm)
2.00" x 0.75" x 1.58"
(50.8 x 19.1 x 40.0 mm)
2.00" x 1.50" x 2.00"
(50.8 x 38.1 x 50.8 mm)
2.00" x 0.75" x 2.00"
(50.8 x 19.1 x 50.8 mm)
2.00" x 0.75" x 2.00"
(50.8 x 19.1 x 50.8 mm)
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AB90A Support Documentation
AB90ACustomer Inspired! 直角ブラケット、ザグリ溝&1/4”-20タップ穴付き(インチ規格)
¥4,189
Today
AB90B Support Documentation
AB90BCustomer Inspired! 薄型直角ブラケット、ザグリ穴&1/4”-20タップ穴付き(インチ規格)
¥4,189
7-10 Days
AB90C Support Documentation
AB90CCustomer Inspired! 薄型直角ブラケット、ザグリ溝&1/4”-20タップ穴付き(インチ規格)
¥4,189
7-10 Days
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
AB90 Support Documentation
AB90直角ブラケット、ザグリ溝付き
¥4,189
Today
AB90H Support Documentation
AB90HCustomer Inspired! 薄型直角ブラケット、ザグリ溝付き
¥4,189
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AB90A/M Support Documentation
AB90A/MCustomer Inspired! 直角ブラケット、ザグリ溝&M6タップ穴付き(ミリ規格)
¥4,189
Today
AB90B/M Support Documentation
AB90B/MCustomer Inspired! 薄型直角ブラケット、ザグリ穴&M6タップ穴付き(ミリ規格)
¥4,189
Today
AB90C/M Support Documentation
AB90C/MCustomer Inspired! 薄型直角ブラケット、ザグリ溝&M6タップ穴付き(ミリ規格)
¥4,189
Today
Back to Top

真空対応直角ブラケット、M6キャップスクリュ対応

こちらのブラケットは上記のAB90、AB90H、AB90A/MおよびAB90C/Mの真空対応タイプで、梱包前に化学洗浄を行い、真空用として処理されています。10-6 Torrまでの真空に対しては、袋から取り出してそのままお使いいただけます。追加の洗浄や処理を行うことで、さらに高い真空度で使用することも可能です。ただし、アルミニウムからのアウトガスにより限界があります(右上の表をご覧ください)。具体的な真空システムにおいてこれらの製品および材料が適切かどうかは、アルミニウムの材料特性とお客様が行った洗浄方法によりご判断ください。

このほか、真空チャンバ内で使用可能な実験セットアップを構築するために組み合わせてご使用いただける、真空対応のオプトメカニクス部品ブレッドボードなども取り揃えております。

Product Image
(Click to Enlarge)
AB90VAB90VAB90VAB90CV(/M)
Item #AB90VAB90HVAB90AV(/M)AB90CV(/M)
Counterbored Mounting SlotsTwo 1/4" (M6) SlotsOne 1/4" (M6) Slot
Counterbored Mounting HolesN/A
Tapped HolesNoneSix 1/4"-20 (M6)
Holes per Side
Three 1/4"-20 (M6)
Holes on One Side
Dimensions (L x W x H)
[Click for Mechanical Drawing]
2.00" x 1.50" x 2.00"
(50.8 x 38.1 x 50.8 mm)
2.00" x 0.75" x 1.58"
(50.8 x 19.1 x 40.0 mm)
2.00" x 1.50" x 2.00"
(50.8 x 38.1 x 50.8 mm)
2.00" x 0.75" x 2.00"
(50.8 x 19.1 x 50.8 mm)
Vacuum Compatibility> 10-6 Torra
Material6061-T6 Aluminum
Outgassing Rate at 20 °C7.6 x 10-9 Torr-Liters/s/cm2
PackagingDouble Vacuum Bagged
  • 追加の処理が必要なく、袋から取り出してすぐに部品を使用できる圧力。追加洗浄と処理によりさらに低い圧力(高い真空度)で使用することも可能です。
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AB90AV Support Documentation
AB90AVCustomer Inspired! 真空対応直角ブラケット、ザグリ穴スロット&1/4"-20タップ穴付き(インチ規格)
¥6,847
Lead Time
AB90CV Support Documentation
AB90CVCustomer Inspired! 真空対応直角ブラケット、薄型、ザグリ穴スロット&1/4"-20タップ穴付き(インチ規格)
¥6,847
7-10 Days
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
AB90V Support Documentation
AB90VCustomer Inspired! 真空対応直角ブラケット、ザグリ穴スロット付き
¥6,847
7-10 Days
AB90HV Support Documentation
AB90HVCustomer Inspired! 真空対応直角ブラケット、薄型、ザグリ穴スロット付き
¥6,847
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AB90AV/M Support Documentation
AB90AV/MCustomer Inspired! 真空対応直角ブラケット、ザグリ穴スロット&M6タップ穴付き(ミリ規格)
¥6,847
Today
AB90CV/M Support Documentation
AB90CV/MCustomer Inspired! 真空対応直角ブラケット、薄型、ザグリ穴スロット&M6タップ穴付き(ミリ規格)
¥6,847
Today
Back to Top

直角ブラケット、M4およびM6キャップスクリュ用

Product Image
(Click to Enlarge)
AB90DAB90E(/M)AB90F(/M)AB90G
Item #AB90DAB90E(/M)AB90F(/M)AB90G
Counterbored Mounting SlotsOne #8 (M4) Slot
One 1/4" (M6) Slot
One 1/4" (M6) SlotN/AOne #8 (M4) Slot
One 1/4" (M6) Slot
Counterbored Mounting HolesSix #8 (M4) Holes
Six 1/4" (M6) Holes
Five #8 (M4) Holes
Six 1/4" (M6) Holes
One #8 (M4) Hole
One 1/4" (M6) Hole
N/A
Tapped HolesN/AFour 8-32 (M4) HolesTwo 8-32 (M4) Holes
Two 1/4"-20 (M6) Holes
N/A
Dimensions (L x W x H)
[Click for Mechanical Drawing]
2.00" x 1.50" x 2.00"
(50.8 mm x 38.1 mm x 50.8 mm)
2.00" x 1.50" x 2.00"
(50.8 mm x 38.1 mm x 50.8 mm)
2.00" x 0.75" x 2.00"
(50.8 mm x 19.1 mm x 50.8 mm)
2.00" x 0.75" x 2.00"
(50.8 mm x 19.1 mm x 50.8 mm)
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AB90E Support Documentation
AB90E直角ブラケット、1/4インチザグリ溝&#8-32タップ穴付き(インチ規格)
¥5,066
Today
AB90F Support Documentation
AB90F薄型直角ブラケット、#8&1/4インチザグリ穴、#8-32&1/4”-20タップ穴付き(インチ規格)
¥4,189
7-10 Days
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
AB90D Support Documentation
AB90D直角ブラケット、M4&M6ザグリ穴およびザグリ溝付き
¥5,066
Today
AB90G Support Documentation
AB90G薄型直角ブラケット、M4&M6ザグリ溝付き
¥4,189
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AB90E/M Support Documentation
AB90E/M直角ブラケット、M6ザグリ溝&M4タップ穴付き(ミリ規格)
¥5,066
Today
AB90F/M Support Documentation
AB90F/M薄型直角ブラケット、M4&M6ザグリ穴、M4&M6タップ穴付き(ミリ規格)
¥4,189
Today
Back to Top

直角プレート

MSAP90 Application
Click to Enlarge
AP90L(/M)とブレッドボードMB636(MB1590/M)
  • 堅牢な一体構造成形
  • 背面の角度付きサポート構造によって取り付けられたオプトメカニクスを補強
  • 平坦度と垂直度が0.05 mm以内
  • 物理的寸法:
    • AP90/M: 73.2 mm x 63.5 mm x 76.2 mm
    • AP90L/M: 223.5 mm x 63.5 mm x 76.2 mm

直角プレートAP90/Mは、垂直に取り付ける必要がある頑丈な3次元光学系アセンブリを構築するのに適しています。このプレートには、光学テーブルの表面から90°の角度で4つのM6貫通スロット、7つのM6タップ穴、2つのM6ザグリ穴が付いています。また、ベースには光学テーブルへの取付け用に長さ34 mmの2つのM6貫通スロットと2つのM6ザグリ穴があります。

大型直角プレートAP90L/Mは、ブレッドボードを光学テーブルの表面に対して90°の角度で保持することが可能な頑丈なマウントです。このプレートには31のM6タップ穴と6つのM6ザグリ穴が光学テーブルの表面から90°の角度で付いています。また、ベースには、光学テーブルへの取付け用に3つのM6貫通スロットと6つのM6ザグリ穴があります。

他の90°取付けオプションとして、角度調整プレートAP180/Mの上部プレートをAP90/Mと同様の角度になるよう位置合わせしてお使いいただくことも可能です。また、当社では45°または30°/60°の取り付けプレートもご提供しております。

 

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AP90 Support Documentation
AP90直角取付けプレート、1/4”-20対応(インチ規格)
¥12,979
Today
AP90L Support Documentation
AP90L大型直角プレート、1/4"-20対応(インチ規格)
¥25,470
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AP90/M Support Documentation
AP90/M直角取付けプレート、M6対応(ミリ規格)
¥12,979
Today
AP90L/M Support Documentation
AP90L/M大型直角プレート、M6対応(ミリ規格)
¥25,470
Today
Back to Top

ミニシリーズ 直角プレート

MSAP90 Mechanical Drawing
Click for Details

ミニシリーズ直角プレートの図面
  • 単体アルミニウムの切り出し構造で優れた剛性
  • 角度付き背面サポート構造により、オプトメカニクスの取付けを補強
  • 平行精度および垂直精度は0.05 mm以内

ミニシリーズ直角プレートMSAP90/Mは、直角プレートAP90/Mを同様の設計で、ミニシリーズ製品と一緒に強固な3次元構成を組み立てるのに適した製品です。このブラケットには、光学テーブルの表面に対して90°の面にM3貫通スロットが4つ、M3タップ穴が7つ、およびM3ザグリ穴が2つ付いています。また、ベースには、ミニシリーズのブレッドボード取付け用に長さ25.4 mmのM3貫通スロットが2つとM3ザグリ穴が2つ付いています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
MSAP90 Support Documentation
MSAP90ミニシリーズ 直角ブラケット、#4-40穴(インチ規格)
¥7,149
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
MSAP90/M Support Documentation
MSAP90/Mミニシリーズ 直角ブラケット、M3穴(ミリ規格)
¥7,149
Today
Back to Top

直角ブラケット、25 mm、50 mmおよび 75 mmレール用

XE50A90 as Breadboard Mount
Click to Enlarge

光学テーブルにボルトで固定された50 mmレール
XE25A90 Reinforced Corner
Click to Enlarge

コーナーが補強された25 mmレール
XE25A90 as Breadboard Mount
Click to Enlarge

光学テーブルにボルトで固定された25 mmレール筐体
  • レールのコーナー補強または垂直取付け用
  • アルミニウムの一体構造で優れた剛性
  • M6キャップスクリュを使用
  • 25 mm50 mmおよび75 mmレール用をご用意

こちらの直角ブラケットは、光学レールを互いに接続したり、レールを光学テーブルに取り付けたりするときにご使用いただけます。ブラケットは光学レールの溝に挿入されたTナット(別売り)にネジ止めして固定します。ブラケットXE50A90およびXE75A90は、当社の50 mm x 75 mmレールにもお使いいただけますが、どちらのブラケットを使用するかはレールの取り付け面によって決まります

ブラケットXE25A90は当社の 光学筐体を光学テーブルまたはブレッドボードに固定するのに適しています。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
XE25A90 Support Documentation
XE25A9025 mmレール用 直角ブラケット
¥4,395
Today
XE50A90 Support Documentation
XE50A90直角ブラケット、50 mmレール用
¥10,379
Today
XE75A90 Support Documentation
XE75A90直角ブラケット、75 mmレール用
¥12,333
Today
Back to Top

コンストラクションキューブ、ザグリ穴付き

RM1G Corner
Click to Enlarge

View Imperial Product List
型番数量Description
RS63Ø1インチピラーポスト、1/4”-20タップ穴、長さ6インチ(インチ規格)
RM1G125.4 mm(1インチ)コンストラクションキューブ、M6ザグリ穴3つ付き
SH25LP381低頭チャネルネジ、1/4”-20、長さ3/8インチ、100個入り(インチ規格)
View Metric Product List
型番数量Description
RS150/M3Ø25 mmピラーポスト、M6タップ穴、長さ150 mm(ミリ規格)
RM1G125.4 mm(1インチ)コンストラクションキューブ、M6ザグリ穴3つ付き
SH6M10LP1低頭チャネルネジ、M6 x 1.0、長さ10 mm、100個入り(ミリ規格)
RM1Gが3本のØ25 mmピラーポストを接続している様子
RM1S Corner
Click to Enlarge

View Imperial Product List
型番数量Description
XE25L12225 mmコンストラクションレール、長さ12インチ、1/4"-20タップ穴(インチ規格)
RM1G125.4 mm(1インチ)コンストラクションキューブ、M6ザグリ穴3つ付き
SH25LP381低頭チャネルネジ、1/4”-20、長さ3/8インチ、100個入り(インチ規格)
TB41黒色ハードボード、610 mm x 610 mm x 4.76 mm(3枚入)
View Metric Product List
型番数量Description
XE25L300/M225 mmコンストラクションレール、長さ300mm、M6タップ穴(ミリ規格)
RM1G125.4 mm(1インチ)コンストラクションキューブ、M6ザグリ穴3つ付き
SH6M10LP1低頭チャネルネジ、M6 x 1.0、長さ10 mm、100個入り(ミリ規格)
TB41黒色ハードボード、610 mm x 610 mm x 4.76 mm(3枚入)
ハードボードのエンクロージャ壁を固定しているスロット付きキューブRM1S
Low-Profile Channel Screws

Click to Enlarge

RM1Gの低頭チャネルネジ
  • RM1G:3辺にザグリ穴付き
  • RM1S:3辺にザグリ穴およびエンクロージャ壁取付け用のスロット付き
  • アルミニウムの一体構造で優れた剛性
  • 平行度、垂直度:0.05 mm以内

これらのコンストラクションキューブには、隣接する面に3個のM6のザグリ穴があります。 最大3個までのオプトメカニクス部品の接続が可能で、ザグリ穴に低頭ネジ(上記参照)を挿入して締め付けます。詳細については右図をご参照ください。 また、キューブRM1Sの角部分にはスロットがあり、遮光用の筐体を構築するためにポスターボードおよびハードボードの壁を取り付けらるようになっています。 どちらのキューブも単体のアルミニウムブロックから機械加工した部品であるため、高い剛性の構築物が求められる用途に適します。 

3個以上のオプトメカニクス部品の接続が必要な場合や対向する面に部品を取り付けたい場合は、下記掲載のコンストラクションキューブRM1F/Mをお使いください。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
RM1G Support Documentation
RM1G25.4 mm(1インチ)コンストラクションキューブ、M6ザグリ穴3つ付き
¥2,799
Today
RM1S Support Documentation
RM1S25.4 mm(1インチ)コンストラクションキューブ、スロットおよびM6ザグリ穴3つ付き
¥3,156
Today
Back to Top

コンストラクションキューブ、タップ穴付き

RM1F Junction
Click to Enlarge
View Imperial Product List
型番数量Description
RM1F11インチコンストラクションキューブ、1/4”-20タップ穴付き(インチ規格)
RS31Ø1インチピラーポスト、1/4”-20タップ穴、長さ3インチ(インチ規格)
RS41Ø1インチピラーポスト、1/4”-20タップ穴、長さ4インチ(インチ規格)
KM100B1キネマティックプラットフォームマウント、1.92 x 1.92インチ(インチ規格)
PM31小型クランプアーム、調整機能付き、#6-32ネジ付きポスト(インチ規格)
RM1C1Ø1インチポスト用スリップオン式クランプ、#8-32タップ穴&#8-32ネジ付きスタッド(インチ規格)
View Metric Product List
型番数量Description
RM1F/M125 mmコンストラクションキューブ、 M6 x 1.0タップ穴付き (ミリ規格)
RS75/M1Ø25 mmピラーポスト、M6タップ穴、長さ75 mm(ミリ規格)
RS100/M1Ø25 mmピラーポスト、M6タップ穴、長さ100 mm(ミリ規格)
KM100B/M1キネマティックプラットフォームマウント、48.6 x 48.6 mm(ミリ規格)
PM3/M1小型クランプアーム、調整機能付き、M4 x 0.7ネジ付きポスト(ミリ規格)
RM1C/M1Ø25 mm~Ø25.4 mmポスト用スリップオン式クランプ、M4タップ穴&M4ネジ付きスタッド(ミリ規格)
RM1F(/M)を用いて2本のØ25.4 mmピラーポストを直角に接続し、オプトメカニクス用アセンブリを構築。 
Item #SizeTaps
MSCB31/2"8-32
RM1FA1"8-32
RM1F1"1/4"-20
MSCB3/M12.7 mmM4 x 0.7
RM1FA/M25.0 mmM4 x 0.7
RM1F/M25.0 mmM6 x 1.0
  • 最大6個のオプトメカニクス部品を直角に接続
  • アルミニウムの一体構造で優れた剛性
  • 平行度、直角度:0.05 mm以内

このコンストラクションキューブの各面の中央にはタップ穴が付いています。単体のアルミニウムブロックから機械加工されているため、高い剛性が求められる構造体を構築するのに適しています。止めネジ(セットスクリュ)を使用することで、キューブに最大6個のオプトメカニクス部品を取付けることができます。 

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
MSCB3 Support Documentation
MSCB31/2インチコンストラクションキューブ、 #8-32タップ穴付き(インチ規格)
¥2,033
Today
RM1FA Support Documentation
RM1FA1インチコンストラクションキューブ、 #8-32タップ穴付き(インチ規格)
¥3,239
7-10 Days
RM1F Support Documentation
RM1F1インチコンストラクションキューブ、1/4”-20タップ穴付き(インチ規格)
¥3,239
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
MSCB3/M Support Documentation
MSCB3/M12.7 mmコンストラクションキューブ、 M4 x 0.7タップ穴付き (ミリ規格)
¥2,033
Today
RM1FA/M Support Documentation
RM1FA/M25 mmコンストラクションキューブ、 M4 x 0.7タップ穴付き (ミリ規格)
¥3,239
Today
RM1F/M Support Documentation
RM1F/M25 mmコンストラクションキューブ、 M6 x 1.0タップ穴付き (ミリ規格)
¥3,239
Today
Back to Top

垂直ブラケット

VB01 Application
Click to Enlarge

ブレッドボードMB3060/Mを保持するVB01(/M)
  • 大型のブレッドボードを90°の角度で取付け可能
  • 単体アルミニウムの切り出し構造で優れた剛性
  • 平坦度と垂直度は0.07 mm以内
  • 152.4 mm(6インチ)、298.5 mm(11.75インチ)、457.2 mm(18インチ)のブラケットをご用意
  • 各ブラケットは個別販売

こちらの垂直ブラケットは、当社のアルミニウム製ブレッドボードを光学テーブルに対して垂直に取り付けられるように設計されています。側面にはM6貫通穴とM6タップ穴が一定間隔で空いているので自由度の高い取付けが可能です。VB01A/Mには45°の側面に3つのM6タップ穴があり、更に取付けの選択肢が広がります。ブラケットは高さ152.4 mm(6インチ)、298.5 mm(11.75インチ)、457.2 mm(18インチ)をご用意しています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
VB01A Support Documentation
VB01Aブレッドボード用垂直ブラケット、高さ6インチ、1/4”-20穴(インチ規格)
¥11,637
7-10 Days
VB01 Support Documentation
VB01ブレッドボード用垂直ブラケット、高さ11.75インチ、1/4”-20穴(インチ規格)
¥14,891
7-10 Days
VB01B Support Documentation
VB01Bブレッドボード用垂直ブラケット、高さ18インチ、1/4”-20穴(インチ規格)
¥20,619
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
VB01A/M Support Documentation
VB01A/Mブレッドボード用垂直ブラケット、高さ152.4 mm、M6穴(ミリ規格)
¥11,637
Today
VB01/M Support Documentation
VB01/Mブレッドボード用垂直ブラケット、高さ298.5 mm、M6穴(ミリ規格)
¥14,891
Today
VB01B/M Support Documentation
VB01B/Mブレッドボード用垂直ブラケット、高さ457.2 mm、M6穴(ミリ規格)
¥20,619
Today
Back to Top

大型直角ブラケット

AP90RL Holding Breadboard
Click to Enlarge

円弧状スロットによって接続された2つのブラケットAP90RL(/M)
MSAP90 Application

Click to Enlarge
ブレッドボードMB3030(/M)を垂直に保持するAP90RL(/M)
  • 前面、側面、上面にタップ穴付きの高さ178 mmの大型サイズ
  • 最大±50°の回転用に2つの円弧状のスロット
  • 単体アルミニウムの切り出し構造で優れた剛性
  • 平坦度と垂直度が0.05 mm以内
  • 物理的寸法:127.0 mm x 86.4 mm x 177.8 mm(5.00" x 3.40" x 7.00")

高耐荷重の大型直角ブラケットAP90RL/Mは、当社の光学ブレッドボードを光学テーブルへ直角に取り付けるのに適しています。前面、側面、上面には多くのM6タップ穴と貫通穴があり、前面にはさらに2つの平行な長さ61 mmの貫通スロットがあります。ベースには2つのM6貫通スロットと5つの貫通穴、そしてブラケットを固定する前に最大±50°の連続回転ができるように2つのM6円弧状スロットも付いています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AP90RL Support Documentation
AP90RL大型直角ブラケット、1/4”-20穴(インチ規格)
¥26,692
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AP90RL/M Support Documentation
AP90RL/M大型直角ブラケット、M6穴(ミリ規格)
¥26,692
Today
Back to Top

トゥームストーン型取付けブロック

MSAP90 Application

Click to Enlarge
トゥームストーンブロックに取付けられた2個のキネマティックミラー
  • 複数のオプトメカニクス部品の固定にお使いいただけます
  • 標準の間隔でM6とM4のタップ穴が配置
  • 取外し可能な取付けベースBA2/Mが付属
  • タップ穴の総数:160個
  • 取付けブロックの寸法
    • TS240: 2.00" x 1.47" x 4.00"(L x W x H)
    • TS240/M: 50.0 mm x 37.3 mm x 100.0 mm(L x W x H)

このトゥームストーン型取付けブロックTS240/Mには、M6とM4の取付け用タップ穴が全部で160個あるので、従来と異なった垂直方向の取付けに対応します。取付け用の5面すべてにタップ穴が配列されており、当社の光学系機材をほぼすべてマウントできます。

右の写真はTS240(/M)と、2個のキネマティックマウントKM100、2個の保護膜付き銀ミラーME1-P01、2個のベースBA2(/M)です。このトゥームストーン型取付けブロックには、ベースBA2/Mが1つ付属していますが、マウント、ミラーは別売りです。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
TS240 Support Documentation
TS240トゥームストーン型取付けブロック、1/4”-20&#8-32タップ穴、BA2ベース付き(インチ規格)
¥28,317
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
TS240/M Support Documentation
TS240/Mトゥームストーン型取付けブロック、M4&M6タップ穴、BA2/Mベース付き (ミリ規格)
¥28,317
Today
Back to Top

低頭チャネルネジ

Item #ThreadingThread LengthHexHead HeightQuantityMaterial
SH25LP381/4"-200.38" (9.7 mm)1/8"0.13" (3.2 mm)100Steel,
Black
Oxide
Finish
SH25LP630.63" (15.9 mm)50
SH6M8LPM6 x 1.08 mm (0.31")4 mm4 mm (0.16")50
SH6M10LP10 mm (0.39")100
SH6M16LP16 mm (0.63")50
Low-Profile Channel Screw
Click to Enlarge

コンストラクションキューブRM1Gに取り付けられた低頭チャネルネジ
Standard Cap Screw
Click to Enlarge

コンストラクションキューブRM1Gに取り付けられた標準的なキャップスクリュ

低頭チャネルネジは、標準的なネジに比べてネジ頭部の高さが低く、狭いスペースでもご使用いただけます。コーナーキューブXE25W3のほか、コンストラクションキューブのRM1GRM1Sなどのように、特にネジを90°の位置に近接して取り付けなければならないときにお勧めします。

右の写真では、コンストラクションキューブRM1Gに取り付けられた標準的なキャップスクリュと低頭チャネルネジを比較しています。低頭チャネルネジはネジ頭部の高さが低いため、隣接するネジ同士の干渉を防止できます。

このネジの頭部は、こちらでご紹介しているように、XEシリーズのレール溝にも適合します。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
SH25LP38 Support Documentation
SH25LP38低頭チャネルネジ、1/4”-20、長さ3/8インチ、100個入り(インチ規格)
¥3,776
Today
SH25LP63 Support Documentation
SH25LP63低頭チャネルネジ、1/4”-20、長さ5/8インチ、50個入り(インチ規格)
¥3,017
In Stock Overseas
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
SH6M8LP Support Documentation
SH6M8LP低頭チャネルネジ、M6 x 1.0、長さ8 mm、50個入り(ミリ規格)
¥2,522
Today
SH6M10LP Support Documentation
SH6M10LP低頭チャネルネジ、M6 x 1.0、長さ10 mm、100個入り(ミリ規格)
¥3,776
Today
SH6M16LP Support Documentation
SH6M16LP低頭チャネルネジ、M6 x 1.0、長さ16 mm、50個入り(ミリ規格)
¥3,017
Today