アカウント作成  |   ログイン

View All »Matching Part Numbers


カートは空です
         

アイリス、マウント用取付け穴無し


  • Continuously Variable Irises
  • Maximum Apertures Ranging from Ø5 mm to Ø75 mm
  • Ideal for OEM Applications
  • Black and Stainless Steel Blades Available

D36S

Ø1.3 mm - Ø36.0 mm
Aperture

D5S

Ø0.7 mm - Ø5.0 mm
Aperture

D25SZ

Ø0.0 mm - Ø25.0 mm
Aperture

D12SS

Ø0.9 mm - Ø12.0 mm Aperture

Stainless Steel
Leaves for High-Power
Applications

Related Items


Please Wait

特長

  • 3つのモデルから選択
    • 標準の黒色スチール製板バネ
    • ハイパワー用ステンレススチール製アイリス
    • ゼロ開口
  • 連続可変のアイリス絞り
  • マウント用の取付け穴なし
  • 一部のアイリスは5個入りパックでもご用意

これらのレバー作動連続可変のアイリスは、長期にわたって滑らかな操作が可能です。このアイリスはマウント用の取付け穴がないのでポストに直接取り付けることはできません。当社では、ポスト取付済みアイリスのほか、SMネジ付きのレバー作動アイリスリング作動アイリスもご用意しております。加えて、当社では30 mm および 60 mmケージシステムとお使いいただけるケージシステム用アイリスもご用意しております。 一部のアイリスは5個入りパックでもご提供しております。


Posted Comments:
user  (posted 2020-01-31 06:03:10.787)
The CAD file and drawing for this are incorrect. More specifically - the adjustment lever is about 3/4mm longer than stated and a different shape
MKiess  (posted 2020-02-03 11:42:07.0)
This is a response from Michael at Thorlabs. Thank you very much for this feedback. We will check this immediately and adjust the CAD drawings accordingly.
user  (posted 2016-02-11 14:27:51.693)
Do the black spring steel leaves in the D25S shed any debris during extended operation? Is the black a coating or a metal treatment that would be less likely to wear off?
shallwig  (posted 2016-02-12 06:04:38.0)
This is a response from Stefan at Thorlabs. Thank you very much for your inquiry. The “black” of the leaves comes from “Bluing” the steel which is a passivation process in which steel is partially protected against rust. Any debris during extended operation are not known so far. As you left no contact data could you please contact us at Europe@thorlabs.com for further questions.
matz.liebel  (posted 2015-04-10 16:36:18.06)
We bought four of these irisis (before the warning that they can't be mounted was implemented) and I am still wondering what the point of this product is/was? "Unmountable" rather than "Unmounted" iris would certainly be a better product description. Extremely disappointing
lmorgus  (posted 2015-04-10 12:13:23.0)
A response from Laurie at Thorlabs to Matz: We apologize for the inconvenience our unmounted irises have caused you. They are often used by system integrators who are looking for a minimalistic design that they can either glue into position or machine a custom mount for. Your point is well taken that Unmountable might be a better descriptor than unmounted. We have updated the verbiage on our website in an effort to make this clearer. Thorlabs does sell some iris diaphragms that can be post mounted. We would be happy to exchange the ones you purchased for ones that incorporate a mounting feature.
christian.Matzdorf  (posted 2015-03-25 11:07:30.78)
Why does the unmounted iris diafragma´s has no mounting hole? What can I do with this things if I am not able to mount them?! So you force your Customer to order post mounted ones with a post which is not wanted each time.
shallwig  (posted 2015-03-26 04:29:29.0)
This is a response from Stefan at Thorlabs. Thank you very much for your inquiry. These post mounted irises have a special setscrew which is glued into the iris. On request we also offer the irises without the post. Regarding your question what you can do with the unmounted iris diaphragms. We have several mounts which can be used for holding these iris diaphragms, for example adjustable lens mounts like these http://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=54 or self-centering mounts http://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=1488 can be used. If you are more looking for a possibility to mount the iris on our SM1/2 tubes the ring-actuated Threaded Iris Diaphragms are an option. http://www.thorlabs.com/newgrouppage9.cfm?objectgroup_ID=1479 I will contact you directly to discuss your needs in more detail.
amilner  (posted 2015-01-09 12:31:29.53)
Hello, by mistake I have bought unmounted irises D20S instead of pre-mounted (recent sales order TS1294450). Can I buy mounting housing for them separately? Can you please give me the corresponding part number. Thank you. Alexander Milner.
shallwig  (posted 2015-01-12 03:22:51.0)
This is a response from Stefan at Thorlabs. Thank you very much for you inquiry. Unfortunately the unmounted Irises of this series like the D20S do not have any mounting holes and cannot be attached directly to a post. We will contact you directly to exchange them by the pre-mounted Irises you were originally looking for.
james.parker  (posted 2014-04-11 14:11:59.133)
Could you please tell me the centration tolerance of the minimum-sized aperture relative to the housing, the dimaensional tolerance of the housing and the depth of the iris plane within the housing for D8S. thank you.
shallwig  (posted 2014-04-16 09:02:36.0)
This is a response from Stefan at Thorlabs. Thank you very much for your inquiry. Unfortunately, the centration tolerance is not specified but 0.25mm from the geometrical center is a reasonable estimate. The dimensional tolerances are as follows: Outer diameter: +0.00 / - 0.05 mm Thickness: +/- 0.1 mm Depth of iris plane: 1.1 mm +/- 0.1 mm, measured from the front.
scampbel  (posted 2013-09-16 08:03:19.513)
What is the power handling of these irises? What is "High Power" for the stainless steel? 1W or 1000W? Thanks-
jlow  (posted 2013-09-19 09:38:00.0)
Response from Jeremy at Thorlabs: It’s hard to specify the laser damage threshold because it depends on several parameters such as wavelength, iris opening, exposure duration, etc. The maximum temperature that the blades can be heated would be around 250°C for the regular iris and around 400°C for the stainless steel version.
mduquette  (posted 2013-07-02 10:26:23.8)
It would be extremely helpful if the travel of the arm in degrees were listed for all iris models.
cdaly  (posted 2013-07-02 16:34:00.0)
Response from Chris at Thorlabs: Thank you for your feedback. If it is necessary to know the size of the aperture, we do have a graduated version, SM1D12C which has markings which denote the diameter of the opening for a given position.
jlow  (posted 2012-09-28 09:50:00.0)
Response from Jeremy at Thorlabs: The thread size for the actuator lever on the D12S is M1.7x0.35mm.
cjimenez  (posted 2012-09-27 20:07:15.0)
what is the thread size for the actuator lever on model D12S?
bdada  (posted 2011-12-13 13:36:00.0)
Response from Buki at Thorlabs: Thank you for your feedback. The iris diaphragms you asked about are our unmounted diaphragms, which are best for OEM applications that require custom mounting options. These unmounted diaphragms do not have mounting holes and cannot be mounted directly to a post. To mount the iris, please consider our post mounted irises: http://www.thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=206 The post mounted version of the D37SZ you asked about is the ID37Z Zero Aperture, Post-Mounted Iris Diaphragm, Ø37.0 mm Max Aperture http://www.thorlabs.com/thorProduct.cfm?partNumber=ID37Z For future reference, please note that we also provide SMx threaded irises: http://www.thorlabs.com/NewGroupPage9.cfm?ObjectGroup_ID=1479 If you have recently purchased the unmounted iris diaphragm and want to exchange it with one of the iris diaphragms that can be mounted, please contact TechSupport@thorlabs.com for further assistance.
raphael.cohen3  (posted 2011-12-11 06:11:00.0)
we have a number of these 1/ is there a way to attach them to something? 2/ how can we use them without attaching them to anything? thanks
tor  (posted 2010-11-29 14:50:19.0)
Response from Tor at Thorlabs: The housing is CW614N brass, and the leaves are C100S+QT stainless steel.
a.matveev  (posted 2010-11-26 14:43:44.0)
Which material is the frame of the diaphragm made of?

アイリス、マウント用取付け穴無し

  • 黒色スチール製板バネ
  • 連続可変のアイリス絞り
  • マウント用の取付け穴無し
  • 一部のアイリスは5個入りパックでもご用意
Item #ApertureaSize (Outer Diameter)Thickness
D5SØ0.7 mm - Ø5.0 mm (Ø0.03" - Ø0.20")0.40" (10.2 mm)0.18" (4.4 mm)
D8SØ0.7 mm - Ø8.0 mm (Ø0.03" - Ø0.32")0.58" (14.8 mm)0.18" (4.5 mm)
D12SØ0.8 mm - Ø12.0 mm (Ø0.03" - Ø0.47")0.78" (19.8 mm)0.20" (5.1 mm)
D15SØ0.8 mm - Ø15.0 mm (Ø0.03" - Ø0.59")0.94" (24.0 mm)0.20" (5.0 mm)
D20SØ0.8 mm - Ø20.0 mm (Ø0.03" - Ø0.79")1.18" (30.0 mm)0.22" (5.5 mm)
D25SØ1.0 mm - Ø25.0 mm (Ø0.04" - Ø0.99")1.46" (37.0 mm)0.22" (5.6 mm)
D36SØ1.3 mm - Ø36.0 mm (Ø0.05" - Ø1.42")1.96" (49.8 mm)0.23" (5.8 mm)
D50SØ2 mm - Ø49.9 mm (Ø0.08" - Ø1.97")2.75" (69.9 mm)0.30" (7.5 mm)
  • 開口の公差は±0.13 mm(±0.005")

 

このアイリスには取付け穴がなく、ポストには直接取り付けることができません。

ポスト取付け済みアイリスはこちらをご覧ください。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
D5S Support Documentation
D5S標準アイリス、最大開口Ø5 mm
¥7,736
3-5 Days
D8S Support Documentation
D8S標準アイリス、最大開口Ø8 mm
¥5,698
Today
D8S-P5 Support Documentation
D8S-P5標準アイリス、最大開口Ø8 mm、5個入り
¥28,487
Lead Time
D12S Support Documentation
D12S標準アイリス、最大開口Ø12 mm
¥5,382
Today
D12S-P5 Support Documentation
D12S-P5標準アイリス、最大開口Ø12 mm、5個入り
¥26,905
3-5 Days
D15S Support Documentation
D15S標準アイリス、最大開口Ø15 mm
¥5,626
Today
D15S-P5 Support Documentation
D15S-P5標準アイリス、最大開口Ø15 mm、5個入り
¥28,130
3-5 Days
D20S Support Documentation
D20S標準アイリス、最大開口Ø20 mm
¥6,156
3-5 Days
D20S-P5 Support Documentation
D20S-P5標準アイリス、最大開口 Ø20.0 mm、5個入り
¥30,772
3-5 Days
D25S Support Documentation
D25S標準アイリス、最大開口Ø25 mm
¥6,577
3-5 Days
D36S Support Documentation
D36S標準アイリス、最大開口Ø36 mm
¥8,688
3-5 Days
D50S Support Documentation
D50S標準アイリス、最大開口Ø50 mm
¥15,616
3-5 Days

ステンレススチール製アイリス、マウント用取付け穴無し

  • ハイパワー用ステンレススチール製アイリス
  • 連続可変のアイリス絞り
  • マウント用の取付け穴無し
Item #ApertureaSize (Outer Diameter)Thickness
D12SSØ0.8 mm - Ø12.0 mm (Ø0.03" - Ø0.47")0.78" (19.8 mm)0.20" (5.1 mm)
D25SSØ0.8 mm - Ø25.0 mm (Ø0.03" - Ø0.98")1.46" (37.0 mm)0.22" (5.6 mm)
  • 開口の公差は±0.13 mm(±0.005")

 

このアイリスには取付け穴がなく、ポストには直接取り付けることができません。

ポスト取付け済みアイリスはこちらをご覧ください。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
D12SS Support Documentation
D12SSステンレススチール製アイリス、最大開口Ø12 mm
¥5,626
3-5 Days
D25SS Support Documentation
D25SSステンレススチール製アイリス、最大開口Ø25 mm
¥6,577
3-5 Days

ゼロ開口アイリス、マウント用取付け穴無し

  • 黒色スチール製板バネ
  • 連続可変のアイリス絞り
  • 2重のバネ設計によりゼロ開口を実現
  • マウント用の取付け穴無し
Item #ApertureaSize (Outer Diameter)Thickness
D12SZØ0.0 mm - Ø12.0 mm (Ø0.00" - Ø0.47")0.83" (21.0 mm)0.24" (6.2 mm)
D25SZØ0.0 mm - Ø25.0 mm (Ø0.00" - Ø0.98")1.50" (38.1 mm)0.24" (6.1 mm)
D37SZØ0.0 mm - Ø37.0 mm (Ø0.00" - Ø1.46")2.13" (54.0 mm)0.30" (7.5 mm)
D50SZØ0.0 mm - Ø50.0 mm (Ø0.00" - Ø1.97")2.84" (72.0 mm)0.36" (9.1 mm)
D75SZØ0.0 mm - Ø75.0 mm (Ø0.00" - Ø2.95")4.02" (102.1 mm)0.37" (9.4 mm)
  • 開口の公差は±0.13 mm(±0.005")

 

このアイリスには取付け穴がなく、ポストには直接取り付けることができません

ポスト取付け済みアイリスはこちらをご覧ください。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
D12SZ Support Documentation
D12SZゼロ開口アイリス、最大開口Ø12.0 mm
¥6,119
Today
D25SZ Support Documentation
D25SZゼロ開口アイリス、最大開口Ø25.0 mm
¥7,420
Today
D37SZ Support Documentation
D37SZゼロ開口アイリス、最大開口Ø37.0 mm
¥9,777
Today
D50SZ Support Documentation
D50SZゼロ開口アイリス、最大開口Ø50.0 mm
¥17,443
Today
D75SZ Support Documentation
D75SZゼロ開口アイリス、最大開口Ø75.0 mm
¥25,321
Today
ログイン  |   マイアカウント  |   Contacts  |   個人情報保護方針  |   ホーム  |   FAQ  |   Site Index
Regional Websites:East Coast US | West Coast US | Europe | Asia | China
Copyright © 1999-2020 Thorlabs, Inc.
Sales: +81-3-6915-7701
Tech Supports: +81-3-6915-7701


High Quality Thorlabs Logo 1000px:Save this Image