関節式ボール＆ソケットマウント

50° Adjustment Cone with Three 90° Positions
Fully Lockable Steel Ball
Three Sizes Available

Removable
Double-Ended
Setscrew

90° Position

Locking Screw

Mounting Hole

TRB1

8-32 Threaded Taps

Application Idea

MTRB3 with MK05 Mirror Mount
Directly Mounted to a
Mini-Series Pedestal Post

TRB2

1/4"-20 Threaded Taps

Lockable, Adjustable Position

Please Wait

概要
Feedback

Specifications
Item #	MTRB3	MTRB3/M	TRB1	TRB1/M	TRB2	TRB2/M
Base Thread	8-32	M4 x 0.7	8-32	M4 x 0.7	1/4"-20	M6 x 1.0
Setscrew Thread	4-40	M3 x 0.5	8-32	M4 x 0.7	1/4"-20	M6 x 1.0
Setscrew Hex	0.05"	1.3 mm	5/64"	2.0 mm	1/8"	3.0 mm
Max Torque on Setscrew^a	4.7 lb-in (0.53 N•m)		5.0 lb-in (0.56 N•m)		8.6 lb-in (0.97 N•m)
Locking Screw Hex	5/64" (2.0 mm)		5/64" (2.0 mm)^b		1/8" ^b
Mounting Surface Diameter	0.27" (6.7 mm)		0.35" (8.9 mm)		0.44" (11.2 mm)
Mounting Surface Height^c	0.96" (24.5 mm)		1.30" (33.0 mm)		1.60" (40.6 mm)
Base Diameter	0.64" (16.3 mm)		0.75" (19.1 mm)		1.00" (25.4 mm)

取り付けたコンポーネントによる最大トルクは、3つの固定ネジ全てを手で締め付けた場合の値です。
六角レンチは付属します。
ボールが垂直位置にあるときの高さ

特長

調整可能な角度範囲：50°コーン内
3か所で90°位置に設定可能
M3 x 0.5、M4 x 0.7、またはM6 x 1.0の取外し可能なダブルエンド止めネジ(セットスクリュ)
底面にはM4 x 0.7またはM6 x 1.0の取付け穴
3つの止めネジでロックおよびテンション調整が可能

こちらのマウントはボール&ソケット機構により50°コーン内のどの角度にも設定できます。ベース部分の3か所の切欠きにはめ込むと、ベースに対して90°の角度で取付け面を設定することもできます。ボールには取外し可能なダブルエンド止めネジが付いた取付け面があります。取付け面の角度は3つの固定ネジを用いて固定できます。これらの止めネジはテンションアジャスタの機能も果たしています。

底面にはM4 x 0.7またはM6 x 1.0のネジ穴があり、当社の光学ポストや一般的なオプトメカニクス製品への取付けが可能です。マウントTRB1/MにはM4 x 0.7止めネジ、TRB2/MにはM6 x 1.0止めネジが付いており、それぞれ一般的なオプトメカニクス製品の取付けが可能です。マウントMTRB3/MにはM3 x 0.5止めネジが1つ付いており、当社のミニシリーズ製品の取付けが可能です。

Posted Comments:

tmorgus (posted 2016-06-10 13:58:55.72)

The production of a 1/4-20 version is currently scheduled. I estimate that it will be available online in 4 weeks. If you need one sooner please let tech support know and I'll do what I can to expedite the availability. Sincerely, Tyler - Mechanics Business Unit Leader

user (posted 2016-06-10 13:36:10.213)

A 1/4-20 version would fit most camera, and would be more useful for me.

tmorgus (posted 2015-09-14 07:56:33.15)

Thank you for bringing Paul's comments back to the forefront. Having a 1/4-20 version would be useful. The Mechanics group has a small backlog of projects right now so it might take a little while to get this project to the top of the list. Sincerely Tyler, Thorlabs Mechanics Business Unit

user (posted 2015-09-14 16:01:30.453)

I second Paul's comments (2013-10-07) suggesting a 1/4-20 version (end and top threads): it would allow also to mount end to end 1" posts without the need for extra adapters, and directly mount any 1/4-20 platform or optomechanical element.

paul (posted 2013-10-07 15:48:17.177)

I thought the TRB1 would be useful to hold an IR viewer, with a BE1 to hold it to the table; alas the TRB1 is only available with male/female 8-32 threads at both ends and I'd need 1/4-20 at both ends.

cdaly (posted 2013-10-10 16:06:00.0)

Response from Chris at Thorlabs: Thank you for your feedback. We do not have a 1/4-20 version at this time, but it should still be possible to sue the TRB1 with a few thread adapters. You could use an AE8E25E adapter on the top end to give you the external 1/4-20 thread and an AS25E8E adapter on the bottom to allow you to connect to the BE1. Both can be found here: http://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=1745

user (posted 2011-11-27 18:54:59.0)

A response from Tyler at Thorlabs: The three locking screws are number 8-32 screws with a cone tip. The screw is three sixteenths of an inch long. We will contact you with a custom quote information.

dieter.reinhardt (posted 2011-11-25 05:15:40.0)

Metric swivel base TRB1/M: is it possible to use 1 (or 3?) thumb screws in place of the 3 locking screws? If yes, please send part number.

jsteinbrook (posted 2008-04-23 16:23:49.0)

Photos are fine, leave them alone

+1 数量資料 型番 - インチ規格 定価(税抜) 出荷予定日