ネジアダプター


  • Imperial, Metric, and Imperial-Metric Adapters
  • M3, M4, M6, 4-40, 6-32, 8-32, and 1/4"-20 Thread Adapters
  • Useful for Mounts, Posts, and Post Holders
  • Two Types of Counterbore Adapters

AI25E8E

Internal 8-32

Internal 1/4"-20

AS4M8E

Internal M4 x 0.7

External 8-32

CBA25E

1/4"-20 Thread

0.40" Outer Diameter

AE8E25E

Internal 8-32

External 1/4"-20

AP6M8E

External M6 x 1.0

External 8-32

MSA8

Internal 4-40

External 8-32

MSA25

Internal 4-40

External 1/4"-20

HW-KIT6

Thread Adapter Kit

Related Items


Please Wait

レールキャリアとザグリ穴用アダプターリングSD1の断面図

ネジアダプタ

  • SUS303ステンレススチール加工
  • 他の共通ネジ規格に変換
  • ポスト取付けに適した製品

ネジアダプタによって、M3、M4、M6、#4-40、#6-32、#8-32、1/4"-20のネジサイズを多様に変換することができます。 外ネジ-内ネジ、外ネジ-外ネジ、内ネジ-内ネジのネジアダプタからお選びください。内ネジ-外ネジスタッドアダプタもご用意しています。外ネジ-外ネジや内ネジ-外ネジのネジアダプタは、アダプタの端部でドライバを使った調整が可能です。内ネジ-内ネジのネジアダプタや、内ネジ-外ネジのスタッドアダプタには、トルクを加えてさらに締め付けたり、緩める際に使用する貫通穴があります。

ミニシリーズのネジアダプタを使って、当社の様々な光学マウントミニシリーズポストに取り付けることができます。

ザグリ穴アダプタ

ザグリ穴アダプタを使って、ザグリ穴をネジ穴に変換することができます。キネマティックミラーマウントKM100のような部品にはミリ規格およびインチ規格に対応するザグリ穴があります。通常、これらのマウントはキャップスクリュを使って ポストに固定されますが、固定ネジスタッドでマウントをポストに装着しなくてはならない場合があります。キャップスクリュが使えない場合、このザグリ穴アダプタを使ってKM100のような部品をポストに取り付けることが可能です。

SD1は、M4タップ部品をM6ザグリ穴付き部品に接続することができるアダプターリングです。 この製品は、レールキャリアRC1にM6ザグリ穴があるアリ溝式光学レールセットアップでもお使いいただけます。光学マウントは 通常レールキャリアRC1に装着され、ほとんどの光学マウントはM6タップ加工が施されているのでアダプタSD1が必要となります。

ネジアダプターキット

ネジアダプターキットは、ミリおよびインチの両規格をご用意しています。どちらも製品の図面ラベルが描かれた仕切り付きの整理ボックスに入っています。各キットに含まれているアダプタは下部のリストでご確認いただけます。


Posted Comments:
felix reid  (posted 2022-06-18 19:27:08.603)
Hi, I need an adaptor M6 x 1mm to M3 x 0.5mm external to external thd. A step down post for want of a better expression. Ideally, in brass but steel will do if zinc or similar plated
jdelia  (posted 2022-06-20 12:47:00.0)
We unfortunately do not offer any M6 external to M3 external thread adapters. The closest solution that could be achieved with our products would be using an external-internal M6-M4 adapter like AE4M6M and an external-external M4-M3 adapter like AP4M3M. All of our screw thread adapters are made from 303 stainless steel.
user  (posted 2022-03-08 04:42:51.747)
Hello, Would be better if the adapters could be sold in pack of 10, 20 or more. For quantity order, unpacking every individual adapter takes time. The kit you propose offers only 5 times the items and some are more used than other. Thank you PS : similar comment than "hanneke (posted 2010-02-17 12:20:53.0)"
jdelia  (posted 2022-03-11 09:21:48.0)
Thank you for the feedback! I have passed along your request to our internal suggestion forum. I have also contacted you directly regarding your application.
Mark Handschy  (posted 2020-02-17 10:55:23.187)
product description "External 8-32 Threads and Internal 4-40 Threads" seem to contradict part drawing (autocad pdf)
llamb  (posted 2020-02-18 04:24:43.0)
Thank you for your feedback on our MSA8 thread adapter. After discussing this directly by email, the PDF drawing is indeed correct and matches the description. There is an externally (male) threaded #8-32 stud and an internally (female) threaded #4-40 hole on the other end, which happens to sit within a Ø6 mm counterbore.
Ludovic Angot  (posted 2020-01-03 02:10:39.32)
Hello, could you offer an external 4-40 to external M4 adapter, of the same style as your AP8E4E / AP4M3? This would allow, among other usages, to mount any M4 component (be them threaded or counterbored) on 6mm cage rodes.
llamb  (posted 2020-01-07 10:19:53.0)
Hello, thank you for your feedback. I have added this idea to our internal product forum for further consideration, and have reached out to you directly to discuss your application as well.
Ludovic Angot  (posted 2019-09-19 08:53:39.333)
Hello, I, certainly like other customers, purchase several thread adapter types at once. Would it be possible you think about a way to offer a pack of e.g. 4 (as for your cage assembly rods) of the same adapter for some (or better, all) of your thread adapters? That would save you on packing, packing time, reduce waste and be more convenient and economical for your customers.
YLohia  (posted 2019-09-19 09:38:43.0)
Hello, thank you for your feedback. I have posted your request for multipacks of our 4-40 / M3 thread adapters on our internal engineering forum for further consideration.
tjschongar  (posted 2018-07-29 12:36:50.47)
MSA8 MINI What thread pitch is the 8-32side? unc of unf i need to get the right tap size
YLohia  (posted 2018-07-30 09:43:00.0)
The thread count is 32 threads in an inch, which translates to 0.79375 mm pitch. The 8-32 thread is UNC.
keweima  (posted 2015-03-10 16:47:33.74)
Do you carry anything like this but for a M2.5 thread instead of M3?
cdaly  (posted 2015-03-25 02:12:57.0)
Response from Chris at Thorlabs: We did at one time offer M2.5 adapters to 1/4-20 threads as a standard part, AE25M25E, but this has since been obsoleted. I will look into the possibility of offering it as a custom and contact you directly.
iain  (posted 2014-09-04 12:55:30.963)
Do you make an adapter with external M4 and external 1/4"-20 threads? This would be useful for screwing the M4 end of a 12.7 mm Ø post into an imperial optical table.
cdaly  (posted 2014-09-04 10:02:05.0)
Response from Chris at Thorlabs: There's no external to external adapter, but we do have an internal to external one that should work for you. AE4M25E would thread over the M4 stud which comes with the metric 1/2" series posts and leave you with external 1/4-20 threads, allowing you to mount the M4 side flush with an imperial the table.
Adam  (posted 2010-05-17 15:18:58.0)
A response from Adam at Thorlabs to makarov: Thank you very much for the customer inspired new product idea. I agree that this would be a great addition to the catalog and fill and important void in our thread adapters. I am currently working on a quotation for these custom thread adapters and will confirm the dimensions of the custom product via email.
makarov  (posted 2010-05-16 01:43:11.0)
I would like to buy AP4M4E adapter, external M4 to external #4-40 thread, length 9.5 mm (unfortunately not in your list). I need 20-30 pieces initially. The reason is that we are a metric lab but we have started to use MiniSeries and decided to reuse your standard 6 mm diameter cage rods as posts in MiniSeries, instead of buying separate 6 mm diameter MiniSeries posts (which would add clutter and confusion in the lab as new students try to interchange them with the cage rods). Its quite strange that this thread adapter is not a stock item, given your wide assortment. Right now we have to use two thread adapters on top of one another to mount an M4-threaded component to a cage rod; we have also tried to double-tap M4 holes with #8-32 tap to make it fit a single thread adapter, but I doubt the latter is a good idea lab-wide.
apalmentieri  (posted 2010-02-17 15:15:44.0)
A response from Adam at Thorlabs to Hanneke: We are currently in the process of evaluating the packaging of all of our products. We are updating the packaging to make them more environmentally friendly. Thank you for the suggestions, I agree that this is a good idea and we will get started on changing this packaging.
hanneke  (posted 2010-02-17 12:20:53.0)
I just ordered a bunch of thread adapters and have spent the morning unwrapping each individual screw. It seems that you could save yourself money and your customers time by putting the screws in ziplock bags based on part number in the quantity ordered (e.g. all the AP6M8E screws in the same bag). I do appreciate the perforations on the baggies, though.
Laurie  (posted 2008-10-15 12:01:49.0)
Response from Laurie at Thorlabs to dsmith: It is possible for our machine shop to do some custom machining, but we would need you to provide us with a drawing of your exact requirements prior to quoting you the cost. Thanks for your interest in our products, and please let us know if we can be of further assistance.
dsmith  (posted 2008-07-18 07:14:57.0)
I am looking for an adapter for use on an angle grinder with a 5/8" female thread to attach an M14 internally threaded cone. I would be looking for a quantity of approx. 50 pcs. Any assistance would be appreciated. Best Regards, Darragh Smith Technical Sales Abcon Industrial Products Cavmac Hose Building Cavan Road Cootehill Co Cavan Ireland
Back to Top

ネジアダプタ、外ネジ-外ネジ

Item #Thread A
(External)
Thread B
(External)
Length C
Imperial Thread Adapters
AP8E4Ea8-324-400.38" (9.7 mm)
AP8E25Ea8-321/4"-200.57" (14.5 mm)
Imperial/Metric Thread Adapters
AP8E4Ma,b8-32M4 x 0.70.48" (12.2 mm)
AP25E6Ma,b1/4"-20M6 x 1.00.57" (14.5 mm)
AP6M8Ea,bM6 x 1.08-320.57" (14.5 mm)
Metric Thread Adapters
AP4M3MbM4 x 0.7M3 x 0.50.38" (9.7 mm)
AP6M4MbM6 x 1.0M4 x 0.70.57" (14.5 mm)
  • このアダプタは、インチ規格のネジアダプターキットHW-KIT6に含まれています。
  • このアダプタは、ミリ規格のネジアダプターキットHW-KIT6/Mに含まれています。
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AP8E4E Support Documentation
AP8E4Eネジアダプタ、外ネジ - 外ネジ、#8-32 - #4-40(インチ規格)
¥316
Today
AP8E25E Support Documentation
AP8E25Eネジアダプタ、外ネジ - 外ネジ、#8-32 - 1/4"-20(インチ規格)
¥316
Today
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
AP8E4M Support Documentation
AP8E4MCustomer Inspired! ネジアダプタ、外ネジ - 外ネジ、M4 - #8-32
¥316
Today
AP25E6M Support Documentation
AP25E6Mネジアダプタ、外ネジ - 外ネジ、1/4"-20 - M6
¥316
Today
AP6M8E Support Documentation
AP6M8Eネジアダプタ、外ネジ - 外ネジ、M6 - #8-32
¥316
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AP4M3M Support Documentation
AP4M3Mネジアダプタ、外ネジ - 外ネジ、M4 - M3(ミリ規格)
¥316
Today
AP6M4M Support Documentation
AP6M4Mネジアダプタ、外ネジ - 外ネジ、M6 - M4(ミリ規格)
¥316
Today
Back to Top

ネジアダプタ、内ネジ-外ネジ

MSA8 Application
Click to Enlarge
ネジアダプタMSA8は#4-40ネジ付きスタッドを#8-32に変換します。
Item #Thread A
(Internal)
Thread B
(External)
Length COuter Diametera
Imperial Thread Adapters
MSA84-408-320.50" (12.7 mm)0.40" (10.2 mm)
MSA254-401/4"-200.55" (14.0 mm)0.50" (12.7 mm)
AS6E8E6-328-320.56" (14.2 mm)0.24" (6.0 mm)
AS8E25Eb8-321/4"-200.68" (17.3 mm)0.40" (10.2 mm)
AS25E8Eb1/4"-208-320.61" (15.4 mm)0.40" (10.2 mm)
Imperial/Metric Thread Adapters
AS8E4M8-32M4 x 0.70.56" (14.2 mm)0.25" (6.4 mm)
AS8E6M8-32M6 x 1.00.68" (17.3 mm)0.40" (10.2 mm)
AS25E4M1/4"-20M4 x 0.70.61" (15.4 mm)0.40" (10.2 mm)
AS25E6M1/4"-20M6 x 1.00.63" (16.0 mm)0.38" (9.5 mm)
AS4M8EM4 x 0.78-320.56" (14.2 mm)0.25" (6.4 mm)
AS4M25EM4 x 0.71/4"-200.68" (17.3 mm)0.40" (10.2 mm)
AS6M8EM6 x 1.08-320.61" (15.4 mm)0.40" (10.2 mm)
AS6M25EM6 x 1.01/4"-200.63" (16.0 mm)0.38" (9.5 mm)
Metric Thread Adapters
MSA4/MM3 x 0.5M4 x 0.70.50" (12.7 mm)0.40" (10.2 mm)
MSA6/MM3 x 0.5M6 x 1.00.55" (14.0 mm)0.50" (12.7 mm)
AS4M6McM4 x 0.7M6 x 1.00.68" (17.3 mm)0.40" (10.2 mm)
AS6M4McM6 x 1.0M4 x 0.70.61" (15.4 mm)0.40" (10.2 mm)
  • 内ネジが付いた部分の外径です。
  • このアダプタは、インチ規格のネジアダプターキットHW-KIT6に含まれています。
  • このアダプタは、ミリ規格のネジアダプターキットHW-KIT6/Mに含まれています。
Mini-Series Thread Adapters
Click to Enlarge

ミニシリーズネジアダプタ
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
MSA8 Support Documentation
MSA8ミニシリーズネジアダプタ、外ネジ-内ネジ、#8-32 - #4-40 (インチ規格)
¥815
Today
MSA25 Support Documentation
MSA25ミニシリーズネジアダプタ、外ネジ-内ネジ、1/4”-20 - #4-40 (インチ規格)
¥815
Today
AS6E8E Support Documentation
AS6E8Eネジスタッドアダプタ、内ネジ-外ネジ、#6-32 - #8-32 (インチ規格)
¥681
7-10 Days
AS8E25E Support Documentation
AS8E25Eネジスタッドアダプタ、内ネジ-外ネジ、#8-32 - 1/4"-20 (インチ規格)
¥681
7-10 Days
AS25E8E Support Documentation
AS25E8Eネジスタッドアダプタ、内ネジ-外ネジ、1/4"-20 - #8-32 (インチ規格)
¥681
7-10 Days
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
AS8E4M Support Documentation
AS8E4Mネジスタッドアダプタ、内ネジ-外ネジ、#8-32 - M4
¥681
Today
AS8E6M Support Documentation
AS8E6Mネジスタッドアダプタ、内ネジ-外ネジ、#8-32 - M6
¥681
7-10 Days
AS25E4M Support Documentation
AS25E4Mネジスタッドアダプタ、内ネジ-外ネジ、1/4"-20 - M4
¥681
Today
AS25E6M Support Documentation
AS25E6Mネジスタッドアダプタ、内ネジ-外ネジ、1/4"-20 - M6
¥681
Today
AS4M8E Support Documentation
AS4M8Eネジスタッドアダプタ、内ネジ-外ネジ、M4 - #8-32
¥681
Today
AS4M25E Support Documentation
AS4M25Eネジスタッドアダプタ、内ネジ-外ネジ、M4 - 1/4"-20
¥681
Today
AS6M8E Support Documentation
AS6M8Eネジスタッドアダプタ、内ネジ-外ネジ、M6 - #8-32
¥681
Today
AS6M25E Support Documentation
AS6M25Eネジスタッドアダプタ、内ネジ-外ネジ、M6 - 1/4"-20
¥681
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
MSA4/M Support Documentation
MSA4/Mミニシリーズネジアダプタ、外ネジ-内ネジ、M4 - M3 (ミリ規格)
¥815
Today
MSA6/M Support Documentation
MSA6/Mミニシリーズネジアダプタ、外ネジ-内ネジ、M6 - M3 (ミリ規格)
¥815
Today
AS4M6M Support Documentation
AS4M6Mネジスタッドアダプタ、内ネジ-外ネジ、M4 - M6 (ミリ規格)
¥681
Today
AS6M4M Support Documentation
AS6M4Mネジスタッドアダプタ、内ネジ-外ネジ、M6 - M4 (ミリ規格)
¥681
Today
Back to Top

ネジアダプタ、内ネジ-外ネジ

Item #Thread A
(Internal)
Thread B
(External)
Length C
Imperial Thread Adapters
AE4E25Ea4-401/4"-200.38" (9.5 mm)
AE6E25E6-321/4"-200.38" (9.5 mm)
AE8E25ES8-321/4"-200.20" (5.1 mm)b
AE8E25Ea8-321/4"-200.38" (9.5 mm)
Imperial/Metric Thread Adapters
AE4E6M4-40M6 x 1.00.39" (10.0 mm)
AE6E6M6-32M6 x 1.00.39" (10.0 mm)
AE8E6M8-32M6 x 1.00.39" (10.0 mm)
AE3M25EM3 x 0.51/4"-200.38" (9.5 mm)
AE4M25EM4 x 0.71/4"-200.38" (9.5 mm)
Metric Thread Adapters
AE3M6McM3 x 0.5M6 x 1.00.39" (10.0 mm)
AE4M6MSM4 x 0.7M6 x 1.00.20" (5.1 mm)b
AE4M6McM4 x 0.7M6 x 1.00.39" (10.0 mm)
  • このアダプタは、インチ規格のネジアダプターキットHW-KIT6に含まれています。
  • このアダプタはより多くの当社標準品との互換性を得るため、長さが短くなっています。 
  • このアダプタは、ミリ規格のネジアダプターキットHW-KIT6/Mに含まれています。
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AE4E25E Support Documentation
AE4E25Eネジアダプタ、内ネジ-外ネジ、#4-40 - 1/4”-20 (インチ規格)
¥681
7-10 Days
AE6E25E Support Documentation
AE6E25Eネジアダプタ、内ネジ-外ネジ、#6-32 - 1/4"-20 (インチ規格)
¥681
7-10 Days
AE8E25ES Support Documentation
AE8E25ESネジアタプタ、内ネジ-外ネジ、#8-32 - 1/4"-20、長さ0.20 インチ (インチ規格)
¥681
Today
AE8E25E Support Documentation
AE8E25Eネジアダプタ、内ネジ-外ネジ、#8-32 - 1/4"-20、長さ0.38インチ (インチ規格)
¥681
Today
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
AE4E6M Support Documentation
AE4E6Mネジアダプタ、内ネジ-外ネジ、#4-40 - M6
¥681
Today
AE6E6M Support Documentation
AE6E6Mネジアダプタ、内ネジ-外ネジ、#6-32 - M6
¥681
7-10 Days
AE8E6M Support Documentation
AE8E6Mネジアダプタ、内ネジ-外ネジ、#8-32 - M6
¥681
7-10 Days
AE3M25E Support Documentation
AE3M25Eネジアダプタ、内ネジ-外ネジ、M3 - 1/4"-20
¥681
7-10 Days
AE4M25E Support Documentation
AE4M25Eネジアダプタ、内ネジ-外ネジ、M4 - 1/4”-20
¥681
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AE3M6M Support Documentation
AE3M6Mネジアダプタ、内ネジ-外ネジ、M3 - M6 (ミリ規格)
¥681
Today
AE4M6MS Support Documentation
AE4M6MSネジアダプタ、内ネジ-外ネジ、M4 - M6、長さ5.1 mm (ミリ規格)
¥681
Today
AE4M6M Support Documentation
AE4M6Mネジアダプタ、内ネジ-外ネジ、M4 - M6、長さ10.0 mm (ミリ規格)
¥681
Today
Back to Top

ネジアダプタ、内ネジ-内ネジ

Item #Thread A
(Internal)
Thread B
(Internal)
Length COuter Diameter
AI25E8E8-321/4"-200.50" (12.7 mm)0.40" (10.2 mm)
AI6M4MM4 x 0.7M6 x 1.00.50" (12.7 mm)0.40" (10.2 mm)
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
AI25E8E Support Documentation
AI25E8Eネジアダプタ、内ネジ-内ネジ、1/4”-20 - #8-32 (インチ規格)
¥782
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
AI6M4M Support Documentation
AI6M4Mネジアダプタ、内ネジ-内ネジ、M6 - M4 (ミリ規格)
¥782
Today
Back to Top

ネジ切り加工付きザグリ穴用アダプタ

  • ザグリ穴構造の貫通穴を内ネジに変換するアダプタ
  • 締付用のマイナススロット
  • 当社の製品のザグリ穴にスリップフィットする設計

ネジ切り加工のついたザグリ穴アダプタによって、ザグリ穴を内ネジに変換することができます。キネマティックミラーマウントKM100のような製品には、ミリ規格とインチ規格共用のザグリ穴が開いており、通常はキャップスクリュを使ってマウントをポストに固定します。しかし、マウントのポストへの取付けを、固定式のネジ切り加工付きのスタッドでおこなわなければならない場合があります。このような場合、ザグリ穴用アダプタを使うと取付けを簡単に行うことができます。このアダプタの端には、マイナスドライバなどで締め付けと取り外しに利用するスロットがあります。

Item #Thread A
(Internal)
Outer Diameter BUse in C-Bore
CBA8E8-320.28" (7.0 mm)#8
CBA25E1/4"-200.40" (10.2 mm)1/4"
CBA4MM4 x 0.70.28" (7.0 mm)M4
CBA6MM6 x 1.00.40" (10.2 mm)M6
+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
CBA8E Support Documentation
CBA8Eザグリ穴アダプタ、#8-32タップ (インチ規格)
¥1,197
7-10 Days
CBA25E Support Documentation
CBA25Eザグリ穴アダプタ、1/4"-20タップ (インチ規格)
¥1,197
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
CBA4M Support Documentation
CBA4Mザグリ穴アダプタ、M4 x 0.7タップ (ミリ規格)
¥1,197
Today
CBA6M Support Documentation
CBA6Mザグリ穴アダプタ、M6 x 1.0タップ (ミリ規格)
¥1,197
Today
Back to Top

ザグリ穴用アダプターリング

SD1 Adapter Ring in RC1 Rail Carrier
レールキャリアとザグリ穴用アダプターリングSD1の断面図
  • M6ザグリ穴内でM4キャップスクリュを使用可能
  • ステンレススチール設計
  • 10個入り

アダプターリングSD1によって、レールキャリア、取付けベースBA2/Mなど多くの部品のM6ザグリ穴の中でM4キャップスクリュをご使用いただけます。小型ミラーマウントなど当社のオプトメカニクス製品のほとんどには、このアダプタが対応するM4タップ穴が付いています。例えば、アダプタSD1とM4キャップスクリュを使用すると、小型V字型クランプVC1/MをBA1/Mに直接取り付けることができます。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
SD1 Support Documentation
SD1ザグリ穴用アダプターリング、M4-M6、10個入り
¥1,262
Today
Back to Top

ネジアダプターキット

Adapter Refills
HW-KIT6 Imperial Thread Adapter Kit
ItemQty.ItemQty.
SS* External 8-32 and External 1/4"-20 (AP8E25E)5SS* External 8-32 and External M4 x 0.7 (AP8E4M)5
SS* Internal 8-32 and External 1/4"-20 (AS8E25E)5SS* External 8-32 and External 4-40 (AP8E4E)5
SS* External M6 x 1.0 and External 1/4"-20 (AP25E6M)5SS* External 8-32 and Internal 1/4"-20 (AS25E8E)5
SS* External 8-32 and External M6 x 1.0 (AP6M8E)5SS* Internal 4-40 and External 1/4"-20 (AE4E25E)5
SS* Internal 8-32 and External 1/4"-20  (AE8E25E)10--
HW-KIT6/M Metric Thread Adapter Kit
ItemQty.ItemQty.
SS* External M4 x 0.7 and External M6 x 1.0 (AP6M4M)5SS* External 8-32 and External M4 x 0.7 (AP8E4M)5
SS* Internal M4 x 0.7 and External M6 x 1.0 (AS4M6M)5SS* External M4 x 0.7 and External M3 x 0.5 (AP4M3M)5
SS* External M6 x 1.0 and External 1/4"-20 (AP25E6M)5SS* External M4 x 0.7 and Internal M6 x 1.0 (AS6M4M)5
SS* External 8-32 and External M6 x 1.0 (AP6M8E)5SS* Internal M3 x 0.5 and External M6 x 1.0 (AE3M6M)5
SS* Internal M4 x 0.7 and External M6 x 1.0 (AE4M6M)10--

*ステンレススチール

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
HW-KIT6 Support Documentation
HW-KIT6ネジアダプターキット(インチ規格)
¥20,831
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
HW-KIT6/M Support Documentation
HW-KIT6/Mネジアダプターキット(ミリ規格)
¥20,831
Today