小型クイック接続型(アリ溝付き)垂直移動ステージ、移動量14 mm、クロスローラーベアリング

Build Multi-Axis Configurations

Click for Details
Figure 107B  Z-axis assembly kits allow stages to be mounted in vertical orientations.

Quick-Connect Dovetails

Click to Enlarge
Figure 107A  The XR and XRN stages feature female dovetails on the bottom of the stage that mate with the male dovetails on another. The left female dovetail is on a retractable clamping arm, allowing stages to be dropped into place.

XR & XRN Dovetail Stages and Accessories

Our XR series manual stages feature quick-connect dovetails that allow for the construction of multi-axis systems without the need for additional hardware. The common dovetail feature with a single locking clamp makes it quick and simple to swap parts in and out while preserving excellent orthogonality.

Our selection of products with a quick-connect dovetail includes:

• Linear Translation Stages:
  • Stackable 1-Axis Stages
  • Pre-Assembled 2- and 3-Axis Configurations
  • 25 mm Motorized Actuator Options: Piezo Inertia, Stepper, or DC Servo
• Rotational Stages:
  • 360° Flat Rotation
  • Tip/Tilt Goniometers
• Adapters:
  • Z-Axis Assembly Kits
  • Parallel and Perpendicular Mounting between 2" and 3" Dovetails
• Rail Accessories:
  • Stationary Mounting Platforms
  • Rail Component Positioners
• Base Plates and Rails

Most items are available in compact (2" dovetail) and full-size (3" dovetail) varieties. Adapters are available to interface between the two sizes. See tables 107F and 107G for all available options.

Linear Translation Stages

Thorlabs' Quick-Connect Linear Translation Stages feature 2 inch or 3 inch dovetails for which the female dovetail on the bottom of one stage mates to the male dovetail on another as shown in Figure 107A. Many of these stages have micrometers that can be switched between end-mounted and side-mounted configurations (see Figures 107C and 107D). We also offer vertical translation stages that feature graduated scales to indicate the amount of translation. In Figure 107E, the base plate of a vertical stage is removed to expose the mounting boss which enables additional mounting configurations. The stages featuring 25 mm of travel can also be paired with motors. For specific information on our Quick-Connect Linear Translation stages please see Table 107F.

Click to Enlarge
Figure 107C  Stages are available with either a side- or end-mounted micrometer. The stage can be converted from one configuration to the other using our Micrometer Conversion Kits and a standard set of hex keys or balldrivers.

 
Click for Details
Figure 107D  Stages with micrometers can have them mounted on either side. The side-mounted micrometer can be swapped with the locking plate to create a left- or right-handed stage.

Click to Enlarge
Figure 107E  The base plate on our vertical stages can be removed to access a mounting boss on the bottom of the stage. This allows the stage to be mounted on a base plate for a smaller footprint or a rotation adapter for coarse angular positioning.

Table 107F Linear Translation Stages
Product Pages	Compact 25 mm Stages (Modular Motorized Also Available)	Compact 9 mm Vertical Stage	Full-Size 25 mm Stages (Modular Motorized Also Available)	Full-Size 50 mm Stages	14 mm Vertical Stage
Click Photo to Enlarge
Motion	X, Y, Z, XY, XZ, YZ, XYZ	Z (Vertical)	X, Y, Z, XY, XZ, YZ, XYZ	X, Y, Z, XY, XZ, YZ, XYZ	Z (Vertical)
Travel	25 mm	9 mm	25 mm	50 mm	14 mm
Resolution	500 µm per Revolution	0.25 mm per Revolution	500 µm per Revolution		0.25 mm per Revolution
Quick-Connect Dovetail	2" Dovetail		3" Dovetail
Additional Details

Rotation and Goniometric Stages

Thorlabs' Quick-Connect Rotation Stages provide 360° of continuous manual rotation and are offered with 2" or 3" dovetails. Our Goniometric stages provide ±8° of precise rotation about a fixed point in space and come with 2" dovetails. More information on Thorlabs' Quick-Connect Rotation stages and the XRNG Series Goniometers can be found in Table 107G.

Table 107G Rotation and Goniometric Stages
Product Pages	Compact Rotation Stage	Compact Goniometric Stages	Full-Size Rotation Stage
Click Photo to Enlarge
Motion	Coarse: 360° Rotation, Fine: ± 5°	±8° Tip/Tilt About Fixed Point Above Stage	Coarse: 360° Rotation, Fine: ± 5°
Quick-Connect Dovetail	2" Dovetail		3" Dovetail
Additional Details

Resolution	Coarse: 1°, Fine: 8.33 mrad/rev (0.477°/rev)	Knob: 0.9°/rev (0.015 rad/rev) Vernier Scale: 10 arcmin (0.167°)	Coarse: 1°, Fine: 5.78 mrad/rev (0.331°/rev)
Mounting Holes	Imperial Metric	1/4"-20 (M6), 7 Places 8-32 (M4), 2 Places (Click for Details)	Imperial Metric
Load Capacity	Overall: 30 lbs (13.6 kg) Fine Adjustment: 10 lbs (4.54 kg)	Individual Stages: 3.5 lbs (1.59 kg) Stacked XRNG-K1: 2.8 lbs (1.25 kg)	Overall: 50 lbs (22.7 kg) Fine Adjustment: 15 lbs (6.80 kg)

 

Quick-Connect Dovetail Accessories

Thorlabs also offers adapter kits, mounting platforms, positioners, and base plates for our Quick-Connect Dovetail Stages. 

Stage Adapters
Z-Axis Assembly Kits
	Compact Z-Axis Assembly Kits, 2" Dovetails	Full-Size Z-Axis Assembly Kits, 3" Dovetails
Parallel Mounting Adapters
	Parallel Mounting Adapter, Male 2" Dovetail to Female 3" Dovetail	Parallel Mounting Adapter, Male 3" Dovetail to Female 3" Dovetail
Perpendicular Mounting Adapter
	Perpendicular Mounting Adapter Male 2" Dovetail to Female 3" Dovetail

Dovetail Accessories
Mounting Platforms
	2" Mounting Platforms	3" Mounting Platforms
Rail Positioners
	2" Rail Positioners	3" Rail Positioners

Dovetail Bases
Base Plates
	2" Dovetail Base Plate	3" Dovetail Base Plate with Rotational Adjustment
Rails / Extended Bases
	2" Dovetail Rails	3" Dovetail Rails

手動リニアステージ

手動の移動ステージとして、最大移動量が6 mm以下から50 mmまでのステージをご用意しています。ステージの多くはXY軸やXYZ軸などの多軸構成での注文が可能です。ファイバ結合用としては、多軸ステージのページをご覧ください。標準の手動ステージを用いるよりも精密な調整が可能です。直線移動ステージのほかにも、回転ステージ、ピッチ＆ヨープラットフォームおよびゴニオメータもご用意しております。また、DCサーボモータ、ステッピングモータ、またはダイレクトドライブ技術を用いた電動移動ステージもご用意しています。

クロスローラーベアリングステージ

こちらの直線移動ステージの移動機構には、精密移動、高耐荷重、小角度偏差といった特性を有するクロスローラーベアリングが用いられています。LNRシリーズステージの本体はスチール製、LX、XRNおよびXRシリーズステージの本体はアルミニウム製です。当社ではクロスローラーベアリングを用いた垂直移動ステージもご用意しております(Table 140E参照)。

Table 140A  Crossed-Roller Bearing Stages
Product Family	LNR Series 25 mm Stages	LX Series 25 mm Stages	XRN Series 25 mm Stages	XR Series 25 mm Stages	XR Series 50 mm Stages	LNR Series 50.8 mm Stages
Click Photo to Enlarge
Travel	25 mm (0.98")	25 mm (0.98")	25 mm (0.98")	25 mm (0.98")	50 mm (1.97")	50.8 mm (2")
Drive Type	Multiple	Micrometer	Micrometer	Micrometer	Micrometer	Multiple
Platform Size	2.34" x 2.36" (59.4 mm x 60.0 mm)	2.56" x 2.56" (65.0 mm x 65.0 mm)	2.00" x 3.35" (50.7 mm x 85.0 mm)	2.98" x 4.33" (75.7 mm x 110.0 mm)	2.98" x 5.51" (75.7 mm x 140.0 mm)	3.94" x 3.94" (100.0 mm x 100.0 mm)
Possible Axis Configurations	X, XZ, XY, XYZ	X, XY, XZ, YZ, XYZ	X, Y, Z, XY, XZ, YZ, XYZ	X, Y, Z, XY, XZ, YZ, XYZ	X, Y, Z, XY, XZ, YZ, XYZ	X, XY, XYZ
Additional Details

ボールベアリングステージ

こちらの移動ステージでは、精密移動と長寿命を実現するために、硬化スチール製リニアベアリングが用いられています。様々なアクチュエータが付いた製品や、1軸ステージや予め多軸ステージとして構築された製品をご用意しております。

Table 140B  Ball Bearing Stages
Product Family	MS Series 1/4" Stages	T12 Series 1/2" Stages	MT Series 1/2" Stages	PT Series 1" Stages	LT Series 2" Stages
Click Photo to Enlarge
Travel	1/4" (6.4 mm)	1/2" (12.7 mm)	1/2" (12.7 mm)	1" (25.4 mm)	2" (50 mm)
Drive Type	Multiple	Thumbscrew	Multiple	Multiple	Differential Micrometer
Platform Size	1.17" x 1.17" (29.7 mm x 29.7 mm)	0.76" x 0.81" (19.3 mm x 20.6 mm)	2.40" x 2.41" (61.0 mm x 61.2 mm)	3.00" x 4.00" (76.2 mm x 101.6 mm)	3.75" x 3.75" (95.3 mm x 95.3 mm)
Possible Axis Configurations	X, XY, XYZ	X, XY, XYZ	X, XY, XYZ	X, XY, XYZ	X, XY, XYZ
Additional Details

アリ溝式ステージ

これらの小型ステージの移動機構にはアリ溝と送りネジが組み込まれています。一般的な移動制御用に適したステージです。

Table 140C  Dovetail Stages
Product Family	DT Series 1/2" Stages	DTS Series 1" Stages (Vacuum-Compatible Version Available)	DTS Series 2" Stage
Click Photo to Enlarge
Travel	1/2" (12.7 mm)	1" (25 mm)	2" (50 mm)
Drive Type	Thumbscrew	Thumbscrew	Thumbscrew
Platform Size	1.00" x 1.00" (25.4 mm x 25.4 mm)	2.68" x 2.95" (68.0 mm 75.0 mm)	2.68" x 3.74" (68.0 mm x 95.0 mm)
Possible Axis Configurations	X, XY, XYZ	X, XY, XYZa	X, XY, XYZ
Additional Details

• XYZステージを構築するためのアルマイト加工済み直角ブラケットDTSA03は、真空対応ステージDTS25V/Mにもご使用いただけますが、真空には対応しておりません。
• 移動量25 mmのDTSシリーズには、アルマイト加工されたステージDTS25(/M)と、10^-6 Torrまでの真空に対応するDTS25V(/M)がございます。

フレクシャーステージ

移動ステージNanoflex™には摩擦の無いフレクシャー機構が用いられており、ベアリングを用いた同様のステージと比較して位置決め性能と分解能が向上しています。ステージの移動は、取付けプラットフォームに取り付けられた連結部の弾性変形(たわみ)によって実現されています。多くのモデルには、微細な位置調整用にピエゾアクチュエータも付属します。　

Table 140D  Flexure Stages
Product Family	Nanoflex™ 1.5 mm Stage	Nanoflex™ 5 mm Stages
Click Photo to Enlarge
Travel	1.5 mm (0.06") + 25 µm Piezo	5 mm (0.20")	5 mm (0.20") + 20 µm Piezo
Drive Type	Thumbscrew and Piezo Actuator	Differential Micrometer	Differential Micrometer and Open-Loop Piezo Actuator	Differential Micrometer and Closed-Loop Piezo Actuator
Platform Size	1.18" x 1.18" (30.0 mm x 30.0 mm)	2.95" x 2.95" (75.0 mm x 75.0 mm)
Possible Axis Configurations	X, XY, XYZ	X, XY, XYZ	X, XY, XYZ	X, XY, XYZ
Additional Details

垂直移動ステージ

当社では精密移動用のクロスローラーベアリングを用いた垂直移動ステージや、高荷重用の長距離垂直移動ステージもご用意しております。　

Table 140E  Vertical Stages
Product Family	XRN Series 9 mm Vertical Stage	XR Series 14 mm Vertical Stage	MVS Series 1/2" Vertical Stage	MVS Series 1" Vertical Stage	VAP Series 4" Vertical Stage	VAP Series 10" Vertical Stage
Click Photo to Enlarge
Travel	9.0 mm (0.35")	14.0 mm (0.55")	1/2" (13.0 mm)	1" (25.0 mm)	4" (101.6 mm)	10" (254 mm)
Drive Type	Worm-Gear Driven Lift Screw		Micrometer		Adjuster Knob and Coarse Manual Positioning
Platform Size	2.00" x 2.00" (50.7 mm x 50.7 mm)	2.98" x 2.98" (75.7 mm x 75.7 mm)	2.36" x 2.36" (60.0 mm x 60.0 mm)		3.00" x 6.00" (76.2 mm 152.4 mm)
Additional Details