固定型光ファイバー減衰器、シングルモード


  • Single Mode, Fixed Attenuators from 3 dB to 25 dB
  • Operating Wavelength Ranges from 1240 - 1620 nm
  • FC/PC or FC/APC Connectors

FAK05

Fiber Attenuator / Terminator Kit, FC/APC Connectors (Not to Scale)

FA03T

1240 - 1620 nm
3 dB Attenuation

FA25T-APC

1240 - 1620 nm
25 dB Attenuation

Related Items


Please Wait

特長

  • 光信号を減衰
  • FC/PCまたはFC/APCコネクタに対応
  • FC/PCまたはFC/APC減衰器の6個入りキットもご用意

こちらのシングルモードの固定型光ファイバ減衰器は、減衰器の後部にFC/PCまたはFC/APCコネクタ付きのファイバを差し込むだけで簡単に光信号を減衰できます。減衰器の入射側には2.2 mmワイドキーのメス型コネクタが付いているため、ナローキーおよびワイドキー両方のオス型コネクタに対応できます。また、減衰器の出射側には2.0 mmナローキーのオス型コネクタ(FC/PCまたはFC/APC)が付いています。こちらのシングルモード減衰器には偏光依存性の無い添加物ファイバが使用されており、動作波長範囲1240~1620 nmにおいて仕様に示す減衰量が得られます。

すべての減衰器にはコネクターキャップが付属します。交換用にはプラスチック製の FCコネクタ用キャップをご用意しております。


Posted Comments:
Andrew Schaffer  (posted 2023-02-20 15:04:56.397)
I am looking at your Fixed Fiber Optic Attenuators, Single Mode and would be very interested in the data for these down to 400nm. We don't need well defined attenuation, just quick and easy attenuation of our light without adding bulky optical components. Thank you.
jgreschler  (posted 2023-02-24 10:53:53.0)
Thank you for reaching out to Thorlabs. Unfortunately at this time we don't have data for these performance below 700nm, and the attenuation is generally not stable below the specified operating range. We recommend using one of the single mode VOAs as an alternative for shorter wavelengths.
user  (posted 2022-05-10 15:08:51.54)
Is the Maximum Input Power listed below of 1W given for pulse peak power or for average power? I'm concerned that my ns laser pulses might damage the attenuators.
jgreschler  (posted 2022-05-12 03:33:57.0)
Thank you for reaching out to Thorlabs. The 1W maximum power spec refers to average power when used in pulsed applications.
S A  (posted 2022-02-18 11:04:34.3)
Hi, are these fixed attenuators polarisation maintaining? Many thanks.
jgreschler  (posted 2022-02-22 02:14:25.0)
Thank you for reaching out to Thorlabs. The attenuators on this page are all single mode, non-PM design. We do have a selection of PM attenuators here https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=6162
Ron Guzman  (posted 2021-10-05 13:28:04.61)
Hi, I am not seeing operating temperature specs for some/all of your posted information. I would think if you are qualifying/validating attenuation, filtering, etc., then that would be over a temperature range. Can you assist and/or start to include Operating Temperature Range? That will assist us in classifying some of your products as industrial/ruggedized vs mere commercial. In addition, if you are qualifying them by some testing via telecom/optical/industry compliance, that may merit good collaboration with customers. Many Thanks.
azandani  (posted 2021-10-15 04:12:37.0)
Hello Ron, thank you for contacting Thorlabs. Is this specifically limited to these fixed fiber optic attenuators? If so, we do list an operating temperature range of -40 C to 85 C in the chart above the part numbers. Or perhaps do you mean including an operating temperature for all of the products? Are there specific products which do not include it that you wish to have it? I have reached out to you directly about this.
Abdul Rasheed  (posted 2021-03-11 12:25:12.457)
Would need datasheet for this
YLohia  (posted 2021-03-12 03:39:13.0)
Hello, unfortunately, we don't provide datasheets for these attenuators. That being said, all specs can be accessed via the spec tables on this page.
cbrideau  (posted 2015-02-19 18:12:15.143)
Any chance of getting these for 1040 or 1064nm, FC/PC? I have a fiber laser at 1040nm with diagnostic ports for coupling to a spectrometer, but the signal is a bit strong and I'd need to cut it back substantially.
jlow  (posted 2015-02-25 04:36:47.0)
Response from Jeremy at Thorlabs: We do not have these for lower wavelengths at the moment. For your application, would the VOA1064-FC (http://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=6161&pn=VOA1064-FC) work?
cbrideau  (posted 2014-02-12 11:15:43.03)
A version of this in SMA for multimode fibers would be useful for use with your fiber-coupled spectrometers. I often need to attenuate my signal before capturing it to avoid saturation of the CCD in the spectrometer. A drop-in attenuator like this would be very convenient for these measurements.
pbui  (posted 2014-02-27 04:33:11.0)
Thank you for your feedback. We will consider your suggestion for incorporating SMA fiber attenuators into our catalog in the future.
kirk.mckenzie  (posted 2014-02-04 14:45:08.917)
Can you make these product at 1064nm, APC?
pbui  (posted 2014-02-26 02:02:34.0)
Unfortunately, we are unable to offer custom fiber optic attenuators for 1064 nm.
lee.cairns  (posted 2013-11-04 14:56:09.277)
Hi, Do these attenuators also work at 1um? It would be useful to have lower denominations, for example, 1,2 and 3dB attenuators? Then it is possible to create a chain with an attenuation of arbitrary attenuation to the nearest dB. Regards, Lee
pbui  (posted 2013-11-06 02:01:22.0)
Response from Phong at Thorlabs: Our fiber optic attenuators use a short length of attenuating fiber which is only single-mode in the specified operating wavelength range. They can be used with shorter wavelengths, but the attenuation value will be different from the specified values, and the beam will no longer be single mode. Although it is possible to stack the attenuators to achieve various attenuation levels, please keep in mind that you will also have some insertion loss between each attenuator as well, so your overall attenuation will be higher than simply adding the attenuation specs together.
flint  (posted 2013-04-29 10:18:29.563)
What is attenuation at 2 microns? Is SMF-28 fiber being used? Thanks! John Flint Q-Peak, Inc.
tcohen  (posted 2013-05-15 12:13:00.0)
Response from Tim at Thorlabs to John: The FA10T uses doped attenuating fiber. The attenuation at 2050nm was measured to be 9.55dB.
tcohen  (posted 2012-02-24 14:25:00.0)
Response from Tim at Thorlabs: Thank you for your feedback. We are continuously expanding our catalog and broadening our selection of fixed optical attenuators is currently being discussed. I have posted your feedback for our design engineers to see.
user  (posted 2012-02-24 10:34:01.0)
How about fixed attenuators for all the other wavelengths Thorlabs is famous for supporting.
jjurado  (posted 2011-07-13 13:29:00.0)
Response from Javier at Thorlabs to sankar.ramasubramanian: We currently do not offer fixed connectorized attenuators for use with LC connectors. The only other options that we are able to offer are SC and ST. I will contact you directly to help you find a suitable alternative.
sankar.ramasubramanian  (posted 2011-07-13 04:19:22.0)
We are looking for fixed connectorized 10 dB attenuators with LC connectors. Please send us information if you have the same.
jjurado  (posted 2011-05-15 14:51:00.0)
Response from Javier at Thorlabs to last poster: The performance of these attenuators decays very rapidly if they are used outside of the specified bands. Please contact us at techsupport@thorlabs.com to discuss the details of your application, and we will gladly help you find a suitable attenuator.
user  (posted 2011-05-13 15:43:23.0)
Will the attenuator work for wavelength lower than the specifications?
Tyler  (posted 2009-01-08 16:57:51.0)
A response from Tyler at Thorlabs to mjcooper1: We can supply this part as a custom order with lead times as short as one day. I will have a member of our technical support department contact you so that they can generate a quote. Thank you for letting us know about your product needs. I will post that there is a need to add an FC/APC attenuator to our stocked items to our internal forum.
mjcooper1  (posted 2009-01-08 06:17:47.0)
I am suprised there are no fixed attenuators with FC/APC connectors, which is what I need
peter.rodrigo  (posted 2008-12-12 04:37:39.0)
Hi.Are all of these optical attenuators bidirectional, so that reflected light will experience the same degree of attenuation?-peter
g884513  (posted 2007-12-13 03:48:30.0)
Dear sir Is the VOA50-APC applicative to the attenuation of 980nm laser sources? sincerely Yeh
Back to Top

固定型光ファイバ減衰器、FC/PC

Item # (Click for Photo)FA03TFA05TFA10TFA15TFA20TFA25T
Fiber ConnectorFC/PC
Key SizeUniversal (Female 2.2 mm Wide-Key Input, Male 2.0 mm Narrow-Key Output)
Attenuationa3 ± 0.05 dB5 ± 0.5 dB10 ± 0.7 dB15 ± 1.0 dB20 ± 1.0 dB25 ± 1.3 dB
Operating Wavelength Range1240 - 1620 nm
Attenuation Graphb
(Click for Details)
Transmission50.1 ± 6.1%31.6 ± 3.9%10.0 ± 1.8%3.2 ± 0.8%1.0 ± 0.3%0.32 ± 0.1%
Return Loss≥40 dB
Maximum Input Power1 W
Polarization Dependent Loss (PDL)≤0.1 dB
Operating Temperature-40 to 85 °C
  • この値は挿入損失を含んでいません。この値は自由空間に出力された後の光をディテクタで測定しているため、出力もファイバ結合した場合、損失が増加する可能性があります。
  • グラフ内の青い網掛け部分は各減衰器について規定されている動作波長範囲を示しています。この範囲外での性能は保証されていません。
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
FA03T Support Documentation
FA03TFixed Fiber Optic Attenuator, 1240 - 1620 nm, 3 dB, FC/PC
¥3,599
Today
FA05T Support Documentation
FA05TFixed Fiber Optic Attenuator, 1240 - 1620 nm, 5 dB, FC/PC
¥3,647
Today
FA10T Support Documentation
FA10TFixed Fiber Optic Attenuator, 1240 - 1620 nm, 10 dB, FC/PC
¥3,677
Today
FA15T Support Documentation
FA15TFixed Fiber Optic Attenuator, 1240 - 1620 nm, 15 dB, FC/PC
¥3,677
Today
FA20T Support Documentation
FA20TFixed Fiber Optic Attenuator, 1240 - 1620 nm, 20 dB, FC/PC
¥3,599
Today
FA25T Support Documentation
FA25TFixed Fiber Optic Attenuator, 1240 - 1620 nm, 25 dB, FC/PC
¥3,677
Today
Back to Top

固定型光ファイバ減衰器、FC/APC

Item # (Click for Photo)FA03T-APCFA05T-APCFA10T-APCFA15T-APCFA20T-APCFA25T-APC
Fiber ConnectorFC/APC
Key SizeUniversal (Female 2.2 mm Wide-Key Input, Male 2.0 mm Narrow-Key Output)
Attenuationa,b3 ± 0.5 dB5 ± 0.5 dB10 ± 1.0 dB15 ± 1.0 dB20 ± 1.0 dB25 ± 1.5 dB
Operating Wavelength Range1240 - 1620 nm
Attenuation Graphc
(Click for Details)
Transmission50.1 ± 6.1%31.6 ± 3.9%10.0 ± 2.6%3.2 ± 0.8%1.0 ± 0.3%0.32 ± 0.13%
Return Loss> 60 dB
Maximum Input Power1 W
Polarization Dependent Loss (PDL)≤0.1 dB
Operating Temperature-40 to 85 °C
  • 汎用のキー設計のため、アライメントの変動が起こりうるので、それが減衰量公差に考慮されています。キーのサイズが異なるコネクタを結合する場合、角度付きのファイバ端は完全に接触しない場合があります。
  • この値は挿入損失を含んでいません。この値は自由空間に出力された後の光をディテクタで測定しているため、出力もファイバ結合した場合、損失が増加する可能性があります。
  • グラフ内の青い網掛け部分は各減衰器について規定されている動作波長範囲を示しています。この範囲外での性能は保証されていません。
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
FA03T-APC Support Documentation
FA03T-APC固定型光減衰器、1240~1620 nm、3 dB、FC/APC
¥4,318
Today
FA05T-APC Support Documentation
FA05T-APCCustomer Inspired! 固定型光減衰器、1240~1620 nm、5 dB、FC/APC
¥4,318
Today
FA10T-APC Support Documentation
FA10T-APCCustomer Inspired! 固定型光減衰器、1240~1620 nm、10 dB、FC/APC
¥4,318
Today
FA15T-APC Support Documentation
FA15T-APCCustomer Inspired! 固定型光減衰器、1240~1620 nm、15dB、FC/APC
¥4,318
Today
FA20T-APC Support Documentation
FA20T-APC固定型光減衰器、1240~1620 nm、20 dB、FC/APC
¥4,318
Today
FA25T-APC Support Documentation
FA25T-APCCustomer Inspired! 固定型光減衰器、1240~1620 nm、25 dB、FC/APC
¥4,318
Today
Back to Top

固定型光減衰器とターミネータキット

FAK03 FC/PC Attenuator KitFAK05 FC/APC Attenuator Kit
ItemQty.aItemQty.a
Fixed Fiber Optic AttenuatorsbFixed Fiber Optic Attenuatorsb
3 dB, FC/PC (FA03T)13 dB, FC/APC (FA03T-APC)1
5 dB, FC/PC (FA05T)15 dB, FC/APC (FA05T-APC)1
10 dB, FC/PC (FA10T)110 dB, FC/APC (FA10T-APC)1
15 dB, FC/PC (FA15T)115 dB, FC/APC (FA15T-APC)1
20 dB, FC/PC (FA20T)120 dB, FC/APC (FA20T-APC)1
25 dB, FC/PC (FA25T)125 dB, FC/APC (FA25T-APC)1
Fiber Optic Terminator / Light TrapcFiber Optic Terminator / Light Trapc
FC/PC Connector (FTFC1)5FC/APC Connector (FTAPC1)5
Dust CapsDust Caps
Female, White12Female, Green12
Male, Clear25Male, Green25
  • キットは定められた部品数で発送しますが、箱の各仕切り内には減衰器をさらに3個ずつ、ターミネータをさらに5個ずつ収納できます。
  • ファイバ減衰器の仕様については上の表をご覧ください。
  • ファイバーターミネータの仕様についてはこちらをクリックしてください。
  • 1240~1620 nm用固定型光減衰器が6個。減衰量:3 ~25 dB
  • 400~2100 nm用ファイバーターミネータ(ライトトラップ)が5個
  • メス用12個、オス用25個のダストキャップが付属
  • FC/PCまたはFC/APCコネクタ付きでご用意
  • 9つの仕切りスペース付きのコンパクトなプラスチックケースに収納

当社の光減衰器とターミネータ入りのキットには固定型減衰器が6個、ターミネータが5個、そしてダストキャップが入っています。 キットFAK03はFC/PCコネクタ付き(の減衰器・ターミネータ入り)、キットFAK05はFC/APCコネクタ付きとなっております。 各キットは、177.8 mm x 88.9 mm x 31.8 mmのプラスチックケースに納められています。箱の中には9つのラベル付き仕切りが付いています。 蓋のラベルには内容品、型番(該当品のみ)、減衰器の減衰量ならびに減衰量公差、ターミネータの波長範囲と反射減衰量が記載されています。 右の表では各キットに入っている部品の種類と数量の一覧がご覧になれます。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
FAK03 Support Documentation
FAK03固定型光減衰器/ターミネーターキット、FC/PCコネクタ付き
¥51,617
Today
FAK05 Support Documentation
FAK05固定型光減衰器/ターミネーターキット、FC/APCコネクタ付き
¥55,170
Today