ピグテールファイバー付き偏光ビームコンバイナー/偏光ビームスプリッター、3つのPMポート付き


  • Combine or Split Orthogonal Polarizations
  • 980 nm Operating Wavelength
  • Ideal for Combining Pump Laser Signals Prior to Amplification

PBC980PM-FC

Polarization-
Maintaining
Fiber

Polarization-
Maintaining
Fibers

Related Items


Please Wait
General Specificationsa
Return Loss≥40 dB
Fiber Length1 m on Each Leg
Length Tolerance+0.075 m / -0 m
JacketØ900 µm Loose Furcation Tubing
Size1.38 " x Ø0.22" (35.0 mm x Ø5.5 mm)
Connector KeysNarrow (2.0 mm);
Aligned to Slow Axis for all PM Fiber Legs
  • コネクタによります。

特長

  • 光ファイバーシステム内で直交した偏光成分を合波または分波
  • 高い消光比
  • 双方向: 3つの偏波保持ポート
  • 1 mのØ900 µm保護チューブ付きファイバ

ピグテール付き偏波保持偏光ビームコンバイナ(PBC)または偏光ビームスプリッタは、2つの直交した偏光を1本のシングルモードファイバに合波することも、1つの入力光を直交した2つの直線偏光に分波して、2本のファイバから直線偏光で射出することもできるように設計されています。 このページでご紹介する全てのPBCでは、2本の偏波保持ファイバが方解石プリズムの1つの面に配置され、1本の偏波保持ファイバが、もう一方の面に配置されています。 2本のPMファイバがある面では、透過率が最大となるように、スロー軸が偏光方向に合うよう調整されています。

偏波保持PBCでは、3本全てがPMファイバです。 ポート3からビームの偏光方向をファイバのスロー軸に合わせて入射すると(右図中の黄色い矢印)、このビームはプリズムにより伝搬方向が変わり、ポート1から射出されます。このときの偏光方向はポート1のスロー軸方向です。 逆に、ポート3でのビームの偏光方向がファスト軸に合っているときは(右図中の緑の矢印)、このビームはポート2から射出し、その偏光方向はポート2のスロー軸方向です。 方解石プリズムから射出されたビームの偏光方向に合うように、ポート1とポート2のファイバのスロー軸は互いに直交しています。 ポート3への入射光の偏光方向が、PMファイバのスロー軸に対して角度を持っているときは、ポート1とポート2からの出力は、入射する偏光の角度に大きく依存します。

PM PBCは逆方向からも使用できます。ポート1のスロー軸方向に偏光した入射光は、ポート3からのスロー軸方向の偏光状態で射出されます。ポート2のスロー軸方向に偏光した入射光は、ポート3からのファスト軸方向の偏光状態で射出されます。 偏光方向をポート1とポート2のファスト軸に合わせて入射された光は、プリズムによりポート3と異なる方向に屈折され、ポート3からは射出されません。

これらのPBCは、2つの励起用半導体レーザからの光を1本のファイバに合波して、エルビウム添加ファイバ増幅器やラマン増幅器への励起光を強める用途としてよく使われます。

その他のPBCのオプション
出力部にシングルモードファイバを使用したファイバーベースのPCBはこちらに掲載されています。 当社がご提供しているFiberBenchシステムは、ファイバーベースのシステムにおいて、光を自由空間でも取り扱えるよう設計されています。 この製品は特注のPBCを構築できるように、偏光子とビームスプリッターモジュールを含んでいます。 組立て済みのFiberBenchベースの可変偏光ビームコンバイナ/偏光ビームスプリッタもご用意しています。

Fiber Polarization Combiner / Splitter Selection Guide
Fused FiberIn-Line Micro PrismFree-Space Polarization
Beamsplitter Kits
Motorized Fiber Polarization ControllersMotorized Fiber Polarization ControllersMotorized Fiber Polarization ControllersMotorized Fiber Polarization ControllersMotorized Fiber Polarization Controllers
2 PM Ports, 1 SM Port3 PM Ports1 SM Port, 2 PM Ports3 PM Ports3 FiberPort Assembly
Higher Power Handling and Higher TransmissionBi-Directional, Polarizing, Larger BandwidthCan be Used with Multiple Fiber Types

Posted Comments:
Miguel Varga  (posted 2019-09-11 05:40:00.443)
Hello, I would like to couple twin photons of 811nm into a PBC780PC-FC in order to split them in function of their polarization. Do you have a graph of the losses and extrintion ratio for this fiber in function of the wavelength? I would like to know if it is possible to use this fiber for 811nm photons. Regards, Miguel
YLohia  (posted 2019-10-01 10:53:58.0)
Hello Miguel, thank you for contacting Thorlabs. Unfortunately, we do not have a curve for Insertion Loss and Extinction Ratio vs Wavelength. That being said, we do expect the performance at 811nm to be similar to that at 780nm.
pierrick.cheiney  (posted 2018-11-30 21:30:09.337)
Hello, Could you offer a combiner at 780 nm such as PBC780PM-APC with a 5 m fiber at port 3. I am interested in buyning 4 combiners.
YLohia  (posted 2018-12-03 09:04:48.0)
Hello, thank you for your inquiry. Custom combiners/splitters can be requested by emailing techsupport@thorlabs.com. I will reach out to you directly with more information regarding this quote.
bernd.sontheimer  (posted 2018-07-09 09:56:03.35)
Hello, can you also offer to offer Fiber-Based Polarization Beam Combiners/Splitters @ ~640 nm? If so, would you please come back to me with a custom quote? Thanks in advance and best regards!
YLohia  (posted 2018-07-09 08:25:28.0)
Hello, thank you for contacting Thorlabs. We will reach out to you directly to discuss the possibility of offering this.
brendanbramman  (posted 2017-10-03 22:26:54.247)
Hello, Would it be possible to get these Beamsplitting fibers to accommodate wavelengths of: 493nm, 553nm, 614nm, 650nm, 1762nm? If so, could you let me know how much the wait time would be and how much they would cost? Thanks, Brendan
nbayconich  (posted 2017-10-10 08:10:00.0)
Thank you for contacting Thorlabs. I will reach out to you directly with more information about our custom capabilities.
Ahmed  (posted 2017-03-10 06:54:12.17)
Dear sir Regarding your PBC780PM-FC product, is it possible to manufacture the same model but the operating wavelength is to be 640 nm? If it is possible, what will be the cost and after what time it could be available? I'm intending to use it with your nanosecond laser source working at 640 nm . Thank you in advance for your help Best regards
tfrisch  (posted 2017-03-14 09:00:06.0)
Hello, thank you for contacting Thorlabs. I have asked out Technical Support Team to follow up with you about this requested quote for a custom.
Roger_Hsu  (posted 2014-11-16 18:01:35.807)
Hi, I would like to ask a technical question. Regarding to the mechanism of PBC, the output combine the two orthogonal polarization from two legs,but will the output polarization varying when I perturb the fiber? Will the output polarization state can be maintained as linear polarization?
jlow  (posted 2014-12-22 03:10:37.0)
Response from Jeremy at Thorlabs: Since the fiber is PMF, the output change should be negligible when perturbed slightly. The output polarization would be a combination of the two input as shown on the graphic in the overview tab.
sivelinu  (posted 2014-06-12 18:10:52.923)
Could you please let me know PBS working in 850nm wavelength?
pbui  (posted 2014-06-12 12:13:17.0)
We currently do not offer a polarization beam combiners centered at 850 nm in our catalog, but we may be able to offer it as a custom item. We will contact you to discuss your exact requirements and to provide a quote.
Rudolf.Neuhaus  (posted 2013-11-26 16:00:38.713)
Could you please let me know what the maximum allowed power is for this device? Thanks and best regards, Rudolf Neuhaus
pbui  (posted 2013-12-05 03:26:38.0)
Response from Phong at Thorlabs: For the 780 nm wavelength, the connectors from the should be able to accept up to 300 mW power. For power levels greater than this, due to possible misalignment in coupling, hot spots can form, resulting in power leaks that may cause damage to the connector's epoxy.
Back to Top

980 nm 偏光ビームコンバイナ、偏波保持出力

Item #WavelengthInsertion LossExtinction RatioaFiber TypeConnectors
PBC980PM-FC980 ± 20 nm≤2.0 dB≥18 dBSM98-PS-U25D-HFC/PC
  • スプリッタとして使用した場合
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
PBC980PM-FC Support Documentation
PBC980PM-FCFiber PBC, 980 ± 20 nm, 3 PM Ports, FC/PC
¥106,923
Today