小型キネマティックマウント


  • Hardened Steel Inserts Reduce Wear
  • Brass Sleeves for Smooth Adjustment
  • 100 TPI Precision Adjusters

Hex Head
Adjuster

KMSS

KMS

Removable Knobs
for Tamper Resistance

KMS

Post
Not Included

MH25T

Ø1" Mirror Holder

KMS with MH25
Ø1" Mirror Holder

Application Idea

Related Items


Please Wait
KMS and MH25 Assembly
Click to Enlarge

小型マウントKMSS(/M)の背面には取付け穴があり、狭いスペースでの位置決めに利用できます。
KMS and MH25 Application
Click for Details

MH12、MH25、MH25Tの取付けアダプタを使用してミラーをKMS(/M)またはKMSS(/M)に取付けられます(下記参照)。

特長

  • コンパクトな形状なのでスペースが限られた用途に使用可能
  • 摩耗を減らすためキネマティック接触点は硬化スチール製
  • 垂直および水平取付け用タップ穴
  • Ø12 mm~Ø12.7 mm(Ø1/2インチ)、Ø25 mm~Ø25.4 mm(Ø1インチ)光学素子取付け用アダプタ
  • 刻み目付きノブ付き、ノブ無しをご用意

KMS/MとKMSS/Mは、2つのアジャスタが付いた小型の汎用キネマティックミラーマウントです。KMS/Mの調整ネジには2 mm(5/64インチ)六角ソケットがあり、取外し可能なノブで操作することが可能です。KMSS/Mはアジャスターネジを最小の長さにした薄型設計です。KMSS/Mマウントの調整には2 mm(5/64インチ)の六角レンチが必要となります。

どちらのマウントも角度変位範囲は±4°で、1回転あたり15 mrad/revの調整が可能です。また、M4のネジ穴がマウントの底面と背面にあるので、Ø12 mm~Ø12.7 mm(Ø1/2インチ)ポストに垂直および水平に取り付けることが可能です。マウントの前面には#4-40タップ穴も1つ付いているので当社のミラーホルダMH12、MH25、MH25T(下記参照)も取付け可能です。どちらのマウントも黒色アルマイト加工アルミニウム製です。

ミラーホルダ
全ての小型ミラーマウントには、前部にØ12 mm~Ø12.7 mm(Ø1/2インチ)ミラー用ホルダ(MH12)やØ25 mm~Ø25.4 mm(Ø1インチ)ミラー用ホルダ(MH25またはMH25T)を取り付けることができる#4-40取付け穴があります。MH12には先端がナイロン製の止めネジ(セットスクリュ)が付いていて厚さ2.5 mm以上のØ12 mm~Ø12.7mm(Ø1/2インチ)ミラーを取り付けることができます。MH25およびMH25Tは2個の部品から構成されるアダプタで内ネジ付きの固定具を使用してØ25 mm~Ø25.4 mm(Ø1インチ)ミラーを取り付けます。MH25は2.5 mmから6.1 mmの厚さ、MH25Tは6.0 mmから10.0 mmの厚さのミラーを取り付けることができます。


Posted Comments:
user  (posted 2020-09-30 15:19:49.173)
Hi Do you have any data of the temperature and long term stability of the KMS/M compared to the polaris range?
llamb  (posted 2020-10-08 01:33:30.0)
Thank you for contacting Thorlabs. While we do not currently have thermal stability data for the KMS/M specifically, we have some comparable data for very similar KM- series aluminum kinematic mounts that we can provide. I will reach out to you by email directly with this data. If thermal stability is a concern for your application, we would recommend choosing a Polaris kinematic mount.
Itamar Meyer  (posted 2019-08-28 19:46:55.59)
I have a difficult time figuring out what the rotational axis are, As far as I can see, the only axis of rotation is a diagonal line between the 4-40 TPI adjusters, Am I wrong? For I need pitch and roll adjustments. What use are the screws on the opposite side? The ones who are attached to the spirngs, are they also for adjustments? Thanks.
YLohia  (posted 2019-08-28 10:47:38.0)
Hello, thank you for contacting Thorlabs. This kinematic mount offers pitch and yaw adjustment. The set screws on the opposite side are used to secure the extension springs to the front plate and are not intended for adjustment.
user  (posted 2019-05-23 09:53:36.74)
It would be great if you made these little holders for 1.5" optics, to make a low-cost 1.5" kinematic mirror mount. I would buy lots!
llamb  (posted 2019-05-23 10:30:51.0)
Thank you for your feedback. I have added this idea to our internal product forum for further review.
Joey Lawson  (posted 2019-03-19 14:15:25.69)
Can you confirm whether or not the KMSS mount would be compatible with the PIAK10 piezoelectric inertia actuator?
llamb  (posted 2019-03-20 02:09:21.0)
The KMSS mount is not compatible with the PIAK10 acutator. The KMSS features 3/16"-100 threaded adjuster screws, while the PIAK10 features a 1/4"-80 threaded barrel.
bernd.steffen  (posted 2016-03-24 11:01:59.897)
Can you add a 4-40 thread right in the axis of the ball joint to make the mount "gimbal" (without glue, as I do it now...)? And do you also have a "left handed" version?
besembeson  (posted 2016-03-24 03:09:36.0)
Response from Bweh at Thorlabs USA: We don't have a left handed version at this time but we will review this option. I will contact you about your application and the gimbal construct.
user  (posted 2015-01-22 16:29:40.76)
Hi, I agree with the other people below. The upper mounting hole of KMS/M and KMSS/M should be M4 (or at least M3), not 4-40. There's no screw adapter available for male 4-40 to M4 (or M3), which makes this product hard to use.
cdaly  (posted 2015-01-22 04:09:32.0)
Response from Chris at Thorlabs: The #4-40 threaded hole is to provide compatibility with the existing optic holders such as MH12, MH25, and MH25T. We will discuss internally the possibility of making the change to an metric threaded hole, but this would require a new version of each of these items as well.
adam.wyatt  (posted 2014-05-07 10:05:20.22)
Is it possible to supply the KMSS/M (and similar mounts) with M4 tapped holes on the centre of the front plate, instead of the 4-40 UNC threaded hole already there.
jlow  (posted 2014-05-07 11:27:49.0)
Response from Jeremy at Thorlabs: We can do this. We will contact you directly regarding the quote.
hambitza  (posted 2013-05-05 06:15:15.187)
I am searching for the resolution for the KMS/M mount in mrad per revolution. On its catalog page 249 there is the resolution only for other components from the KM... series given.
cdaly  (posted 2013-05-06 11:04:00.0)
Response from Chris at Thorlabs: Thank you for using our feedback tool. Both the KMS and KMS/M use 3/16"-100 adjusters, which results in a resolution of 14.7 mrad/revolution at the nominal position.
klee  (posted 2009-10-15 10:28:33.0)
A response from Ken at Thorlabs to weronika.zaperty: The #4-40 thread has a 0.112" (2.8448mm) diameter and 40 TPI (threads per inch), which translate to a 0.635mm thread pitch. McMaster Carr has numerous #4-40 screws available.
weronika.zaperty  (posted 2009-10-15 08:12:27.0)
Hi:) i have a question about thread of KMS/M element - at the documentation there is written #4-40 - how it can be describe in metric units? where can I buy such threads? best regards, Weronika Zaperty
klee  (posted 2009-08-26 11:11:55.0)
A response from Ken at Thorlabs to bmcpherson: We can make the KMSS with F19SS038 screws as a special. Please let us know the quantity and we can send you a quote.
whyemail  (posted 2009-08-25 21:57:25.0)
Seem silly to require an email just to input a comment.
bmcpherson  (posted 2009-08-19 19:05:55.0)
We used to buy this part with a shorter adjuster. I dont have any left but the adjuster would fit flush to the body. If I had to guess the old ones were 3/8" length but I am not entirely certain. An option for shorter adjuster screws to make the space occupied even smaller would be really nice.
Back to Top

小型キネマティックミラーマウント、取り外し可能なノブ付き

Compact Kinematic Mount
Click for Details

マウントKMS(/M)概略図
  • 小型設計:25.4 mm x 28.7 mm x 33.0 mm
  • 角度範囲: ±4°
  • 滑らかで長期間動作用の取外し可能なノブ
  • ポストへの垂直および水平取付け用に2つのM4タップ穴
    (概略図参照)
  • 前面プレートにミラーホルダ取付け用#4-40タップ穴
    (概略図参照)

KMS/Mは、2つのアジャスタが付いたミラーマウントで、寸法が25.4 mm x 28.7 mm x 33.0 mmの小型設計となっています。アジャスタには取外し可能なノブがあり、青銅の軸受け筒に収納されているので、滑らかで長期的な作動が可能です。さらにアジャスタにある六角穴ネジによって、ノブが取り外された状態でも六角レンチつまみネジHKTS-5/64または2 mm(5/64インチ)六角レンチを使って調整できます。

ミラー面の角度変位範囲は±4°で、1回転あたり15 mrad/revの調整が可能です。2つのM4のネジ穴があるので、Ø12 mm~Ø12.7 mm(Ø1/2インチ)ポストに垂直および水平に取り付けることが可能です。マウントの前面プレートには#4-40タップ穴があるので、当社のミラーホルダMH12、MH25、MH25T(下記参照)を取り付けることが可能です。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
KMS Support Documentation
KMS小型キネマティックミラーマウント、ポスト取付け用#8-32タップ穴付き(インチ規格)
¥6,021
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
KMS/M Support Documentation
KMS/M小型キネマティックミラーマウント、ポスト取付け用M4タップ穴付き(ミリ規格)
¥6,021
Today
Back to Top

小型キネマティックミラーマウント、薄型

Compact Kinematic Mount
Click for Details

KMSS(/M)マウントの概略図
  • 小型設計:25.4 mm x 28.7 mm x 20.1 mm
  • 角度範囲: ±4°
  • 省スペースのため短いアジャスターネジを採用
  • ポストへの垂直および水平取付け用に2つのM4タップ穴
    (概略図参照)
  • 前面プレートにミラーホルダ取付け用#4-40タップ穴
    (概略図参照)

ミラーマウントKMSS/Mでは、アジャスターネジをできる限り短くすることでマウント全体の大きさは25.4 mm x 28.7 mm x 20.1 mmと小型設計になっています。この製品ではアジャスターネジが短くノブがつけられないので、ミラーマウントを調整するにはつまみネジ型六角レンチHKTS-5/64または2 mm(5/64インチ)六角レンチが必要となります。

ミラー面の角度変位範囲は±4°で、1回転あたり15 mrad/revの調整が可能です。2つのM4のネジ穴があるので、垂直および水平取付けが可能です。マウントの前面プレートには#4-40タップ穴があるので、当社のミラーホルダMH12、MH25、MH25T(下記参照)を取り付けることが可能です。

25.4 mm(1インチ)長方形光学素子用の小型キネマティックマウントKMSR/Mもございます。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
KMSS Support Documentation
KMSSCustomer Inspired! 小型キネマティックミラーマウント、六角アジャスタ、ポスト取付け用#8-32タップ穴付き(インチ規格)
¥5,584
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
KMSS/M Support Documentation
KMSS/MCustomer Inspired! 小型キネマティックミラーマウント、短小六角アジャスタ、ポスト取付け用M4タップ穴付き(ミリ規格)
¥5,584
Today
Back to Top

Ø12 mm~Ø12.7 mm(Ø1/2インチ)ミラーホルダ

MH12 and KMS with Mirror
Click to Enlarge

KMS(/M)とØ12.7 mmミラーを取り付けたMH12
KMS with MH12 Mirror Mount Adapter

ミラーホルダMH12には、Ø12 mm~Ø12.7 mm(Ø1/2インチ)の ミラーがマウントできます。この製品では、光学素子を2重穴構造に滑り込ませ、先端がナイロン製の止めネジ(セットスクリュ)によって位置固定することができます。厚さが2.5 mm以上のミラーに対応しています。MH12 の背面には#4-40 のネジ切りが付いた突起部があり、KMS/M、KMSS/Mのマウントの表面プレートにネジ締めすることができます。

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
MH12 Support Documentation
MH12ミラーホルダ、Ø12 mm~Ø12.7 mm(Ø1/2インチ)光学素子用
¥2,522
Today
Back to Top

Ø25 mm~Ø25.4 mm(Ø1インチ)ミラーホルダ

MH25 and KMS with Mirror
Click to Enlarge

KMS(/M)とØ25 mmミラーを取り付けたMH25T
MH25 Mechanical Drawing

ミラーホルダMH25とMH25Tは、2個の部品から構成されるアダプタで、このページでご紹介している小型キネマティックマウントの表面プレートにØ25 mm~Ø25.4 mm(Ø1インチ)ミラーを取り付けることができます。このホルダには、KMS/M、 KMSS/Mのマウントの平面部分にネジ締めすることができる#4-40ネジ切り付き突起があり、光学素子の位置をホルダ内で固定する固定具が付属します。MH25は厚さが2.5 mm~6.1 mm、MH25Tは厚さが6.0 mm~10.0 mmのミラーをマウントできます。スパナレンチSPW909を使用することでホルダを簡単に取り外し、ミラーを取り付けることができます。

Item #Min. Optic ThicknessMax Optic Thickness
MH252.5 mm (0.10")6.1 mm (0.24")
MH25T6.0 mm (0.23")10.0 mm (0.39")
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
MH25 Support Documentation
MH25ミラーホルダ、Ø25 mm~Ø25.4 mm(Ø1インチ)、厚さ2.5~6.1 mm光学素子用
¥2,511
Today
MH25T Support Documentation
MH25TCustomer Inspired! ミラーホルダ、Ø25 mm~Ø25.4 mm(Ø1インチ)、厚さ6.0~10.0 mm光学素子用
¥3,239
Today