Products Home実験用照明器具
- Long-Lasting LED Lights
- LED Spotlight with Adjustable Neck
- LED Light Strips
PSX501
Flexible Neck
for Precise
Direction of Light
LED Light Strip
71.99" or 33.46" (1.83 m or 0.85 m)
Please Wait
当社では、一般的な研究用照明用に2つの製品をご用意しています。PSX501は小型の電池駆動LED光源で、首部分がフレキシブルなため、ご希望の対象領域への照明が簡単に行えます。PSY240、PSY240E、TFA2は、当社のNexus®テーブルフレーム付きオーバーヘッドシェルフや光学テーブル用自立型シェルフなどのラックや棚の下に取り付けられるLEDストリップライトです。PSY240とPSY240Eは長さ850 mm、TFA2は長さ1828.5 mmです。PSY240Eには4.3 mの延長ケーブルも付属します。LEDストリップライトは3個のバネクリップを用いて位置固定できます。
| Posted Comments: | |
Jeff Secor
(posted 2023-04-10 19:36:17.883) You should make a connector for the flexible arm to standard optic mounts.
Please send me free swag :) do'neill
(posted 2023-04-12 05:06:45.0) Response from Daniel at Thorlabs. Thank you for your feedback, I will pass your suggestion on to our internal engineering teams and I will reach out you directly to further discuss it. Benjamin Rost
(posted 2020-09-08 01:29:56.15) Hi folks,
I really like the LED light strip for illumination inside of my ephys-setup. I'm working with optogenetic tools, which often require working under safe-light conditions. I bought a safelight for darkroom applications that can switch between red and white light, however, this causes a lot of noise (https://www.fotoimpex.de/shop/fotolabor/heiland-electronic-led-laborlicht-fuer-schwarzweiss-rot-und-weiss.html)
So my "customer suggestion" would be, if you could design the LED light strip with both white and red LEDs for such applications?
Best, Benjamin cwright
(posted 2020-09-09 04:55:35.0) Response from Charles at Thorlabs: Hello Benjamin and thank you for your feedback! A safelight for optogenetics work is an interesting idea and I will ensure it is presented on our internal engineering forums for consideration. cbrideau
(posted 2014-04-23 20:34:46.77) I would love to see shorter versions for fitting into smaller spaces, with 1/4-20 holes so they can be easily post mounted. A dimmer would also be handy, particularly one you could set to a specific light level, then toggle on and off (dimming function separate from on/off function).
I use LEDs for spot lighting all over my lab and find them very useful due to their 'instant on' and low heat production. pbui
(posted 2014-05-01 04:16:25.0) Thank you for your feedback. We will keep your suggestions in mind and make improvements to our product offerings whenever possible. bdada
(posted 2011-03-04 19:12:00.0) Response from Buki:
Thank you for your feedback. I am glad to hear that you have found the PSX501 lamp useful in your microscopy lab. Unfortunately, we are not able to modify the lamp as you suggested but we will bear your suggestion in mind as we continue to expand our selection of microscopy lab tools. max.ulbrich
(posted 2011-03-03 18:49:32.0) Hi Thorlabs team,
I think the PSX501 is a really very convenient product. It is great for the microscope room where it has to be dark but I want my keybord to be illuminated. However, sometimes when I sit there doing experiments it is running for hours and hours. It would be great to have a switch between batteries and a plug from an external low voltage transformer. Then I could plug it in to save batteries if I keep it at the same spot for a while. Maybe you could think about redesigning it?
Best,
Max hschoenwetter
(posted 2010-06-29 11:36:57.0) Hi colleague,
I am looking for a led spot light for product photography and saw our led mini light.
Are there any specs: (daylight-)°K, lumen etc. available?
Thank you, Hubert |
ズーム
- 長寿命・高輝度のLEDランプ
- レンズにより均一な配光
- クランプやマグネットベースで取り付け可能
- 単4電池を3個使用(付属)
この小型で電池駆動のユニットは、あらゆる表面に直接ライトを当てることができます。 クリップやマグネットベースを用いて作業面に取り付けることも可能です。 ライトの首部分が曲がるので、対象領域に直接そして簡単に照明を当てることができます。 この高輝度のLED光源は標準的な標準的なLED 3個分と同等の輝度があり、レンズによって作業面全体で均一は配光が得られます。 たためるため収納しやすく、3個の単4電池(付属)で駆動します。
ズーム| Item # | PSY240 | PSY240E | TFA2 |
|---|---|---|---|
| Brightness | 1530 Lumens | 3600 Lumens | |
| # of LEDs | 51 | 120 | |
| Powera | 15.3 W | 36 W | |
| Voltage | 12 VDC (Power Supply Included) | ||
| Dimensions | 850 mm x 17.4 mm x 8.2 mmb (33.46" x 0.69" x 0.32") | 1828.5 mm x 17.4 mm x 8.2 mm (71.99" x 0.69" x 0.32") | |
- 長さ:850 mmまたは1828.5 mm
- ON/OFFスイッチ付き
- 頑丈なアルミニウム製のベースが反りを防止
- 艶消し加工のプラスチックのカバーにより均一な光の広がりを実現
- バネクリップ3個、M6ネジ3個、電源が付属
- PSY240EにはTナットが3つと4.3 mの延長コードも付属
こちらのLEDストリップライトは850 mmと1828.5 mmの2種類の長さでご用意しております。3個のバネクリップで当社の光学テーブル用自立型シェルフやNexusテーブルフレーム付きオーバーヘッドシェルフなどのラックや棚に簡単に取り付けられます。 このストリップライトは、当社以外の一般的な研究用実験ベンチ上で使用することも可能です。PSY240Eには長さ4.3 mの延長ケーブルが1本と3つのTナット(50 mmおよび75 mm光学コンストラクションレール用)、3つの長さ6 mm M6ネジが付属します。
(*国内販売品に付属するACアダプタは左上の写真とは形状が異なります)
実験室用照明器具