取付け用タップ穴付きØ38 mm(Ø1.5インチ)ポストクランプ


  • Modular Vertical Mounting Surface
  • Clamps Securely to Our Ø1.5" Posts
  • Generous Distribution of Tapped Holes and Counterbores

2.50"

2.50"

Large Removable Plates Provide a Variety of Tapped Holes and Counterbores

C1520

Additional 2.50" x 2.50" Mounting Plate

C1545

4.50"

4.50"

C1511

PSHA

Adjustable Height Collar

Application Idea

Detachable Mounting Plate Allows Exchanging of Setups

Front

Back

Related Items


Please Wait
Spatial Filter
Click to Enlarge

Ø38 mm(Ø1.5インチ)ポストにポストクランプC1511(/M)の#8(M4)ザグリ穴を用いて取り付けられた空間フィルタ
1.5 inch Post Clamp
Click to Enlarge
台座付きベースPB4(/M)上のØ38 mm(Ø1.5インチ)ポストに取り付けられたC1511(/M)

特長

  • 2つのサイズをご用意
    • 63.5 mm x 63.5 mm(型番C1511/M)
    • 112.5 mm x 112.5 mm(型番C1545/M)
  • M6およびM4の取り付け用タップ穴
  • M6およびM4のザグリ穴
  • ポストクランプの素早くかつ再現性の良い位置決めを行うための簡単脱着式ハンドル
  • ポストクランプの高さ微調整用カラー(PSHA/M)

Ø38 mm(Ø1.5インチ)ポスト取付け用クランプC1511/MおよびC1545/Mは、当社のØ38 mm(Ø1.5インチ)ポストアセンブリには不可欠な部品で、剛性が高くかつ汎用性の高い取り付け面を提供します。これらのクランプは、ブレッドボードと同様に多様な光学マウントを固定することができます。

クランプ機構は、当社のØ38 mm(Ø1.5インチ)ポストに直接取り付けられます。後部のクランプ機構をØ38 mm(Ø1.5インチ)ポストに沿ってスライドさせて垂直方向の位置決めを行ないます。垂直方向の位置決め後、ハンドルでクランプ機構を動かします。このハンドルはM6キャップスクリュに交換することも可能です。追加の取付けプレートは、別売りでご用意しております(下記参照)。

旧タイプのポスト取付け用クランプにも、クランプをポストに簡単かつ確実に固定できるこの簡単脱着ハンドルを取り付けることができます。取付けは簡単で、ポストクランプのM6固定ネジと交換するだけです。長さ51.4 mmのハンドルにはM6ネジ付きのスタッドがあり、ハンドルを回転させて簡単に取り付けることができます。

高さ調整カラーPSHAを使うと、ポストに取り付けられたハードウェアの高さ調整を簡単に行うことができます。調整リングを利用すると、1回転で0.64 mmの高さの微調整を行うことができます。このカラーにより高さを調整せずに部品を回転させることもできます。

Ø38 mm(Ø1.5インチ)ポストアクセサリ
Construction AccessoriesV-MountsMounting PlatesBrackets / PlatformsMirror Mounts

Posted Comments:
Scott Remington  (posted 2023-07-10 09:39:04.81)
It would be nice if you would include a drawing of the base #C1511 showing a more detailed view of the 4 mounting holes. You can see a rough view in the "Application Idea" picture, but you cannot tell whether the tapped holes are #8's or 1/4-20's or something else entirely. It would be very good so that you know which holes won't be available when you mount your hardware. Thank you.
cdolbashian  (posted 2023-07-14 04:56:54.0)
Thank you for reaching out to us with this inquiry. To attach something to one of these vertical plates, you use 8-32 cap screws which attach through the back of the plate, and are threaded into the swappable platforms.
fitilis  (posted 2018-08-27 13:14:22.21)
Is it possible to have an un-anodised version of C1545/M (to be vacuum compatible) and how much it will cost?
llamb  (posted 2018-08-27 08:52:17.0)
Thank you for your feedback. We can offer the C1545/M with its aluminum components unanodized. You can also contact techsupport@thorlabs.com directly for quotes on unanodized products. However, the C1545/M has a Nylon handle which will limit this product's vacuum compatibility. I will reach out to you directly to discuss your application and possible alternatives.
ludoangot  (posted 2017-04-10 12:04:27.4)
Do you offer a plate similar to your C1520 but with mounting holes for 30 and 60mm cages? If not, such a plate would offer another option to install cages on 1" or 1.5" posts. The mounting holes could be unthreaded 6mm with side locking screws along the principle of your standard cage plates or, if using your C1001(/M), the detachable mounting plate would have the unthreaded 6mm holes and the parts that attaches to the post would have 4-40 threads for the studs.
tfrisch  (posted 2017-04-27 02:49:21.0)
Hello, thank you for contacting Thorlabs. I will reach out to you directly to discuss various options for integrating cage systems and posts.
koreancarsg  (posted 2013-05-02 16:48:25.853)
for C1501/M Manual Height Adjustment Achieved via a Screw, may i know is the securing screw made of what material? is it stainless steel? Am afraid it will corode after long period of time when it is too tighten in humid enviorment. Thank you
jlow  (posted 2013-05-02 12:49:00.0)
Response from Jeremy at Thorlabs: The screw material is stainless steel.
jlow  (posted 2012-12-24 11:38:00.0)
Response from Jeremy at Thorlabs: I'm assuming you are mainly looking for the tolerance of the bore that the post goes through. Worst case, there is there could be 0.019" clearance between the post and clamp prior to tightening. The nominal gap is 0.015" and the minimum gap is 0.014". When clamping the metal will close evenly so there should be minimal angular drift, but the tolerances of the plate could result in an angular difference of about 1.6mrad (calculated).
ben.mangum  (posted 2012-12-13 14:27:17.21)
Once tightened, how close to plumb can I expect the front face of the C1501 to be? How tight are the tolerances?
Thorlabs  (posted 2010-07-07 08:42:05.0)
Response from Javier at Thorlabs to mpartlow: thank you for your feedback. Although we have not tested the C1525 mounting post clamp for maximum load capacity, we are confident that it will be able to effectively support a heavy collimator or isolator, as the clamping force would allow for supporting several pounds.
mpartlow  (posted 2010-06-29 16:00:09.0)
Is there a recommended maximum weight load for the C1525 attached to a 1.5" post? I am considering using it to hold a heavy collimator/isolator.
Back to Top

Ø38 mm(Ø1.5インチ)ポスト用クランプ

Mounting Options
LabelDimensionsTypeCount
A1/4"-20 (M6)Tapped Hole17
B8-32 (M4)Tapped Hole24
C1/4" (M6)Counterbored Hole4
D#8 (M4)Counterbored Hole4

当社のポストクランプC1511/Mの前面プレートは取り外し可能で、タップ穴とザグリ穴が多数開いています。この取付けプレートの付いたポストクランプは、当社のØ38 mm(Ø1.5インチ)ポストに取り付けることができます。 

このクランプには、ポストに固定するための簡単脱着ハンドルが付いています。長さ51.4 mmのハンドルにはM6ネジ付きのスタッドがあり、ハンドルを回転させて簡単に取り付けることができます。内部のラチェット機構により、ハンドルの回転位置は取り付けたスタッドを動かさずに調整できます。

右の図では、タップ穴とザグリ穴がアルファベットで示されており、それぞれの穴の寸法と種類が隣の表に明記されています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
C1511 Support Documentation
C1511Ø1.5インチポスト用クランプ、2.5インチ x 2.5インチ(インチ規格)
¥11,087
Today
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
C1511/M Support Documentation
C1511/MØ38 mmポスト用クランプ、63.5 mm x 63.5 mm(ミリ規格)
¥11,087
Today
Back to Top

Ø38 mm(Ø1.5インチ)ポストクランプ用アダプタープレート

  • ポストクランプC1511/Mに付属するプレートと同一製品
  • セットアップの容易な交換を実現

このアダプタープレートを用いると、プレート上に組んだアセンブリをそのまま交換できるため、取付け用ポストクランプC1511/Mの汎用性が高まります。上の図のように、M4 x 0.7とM6 x 1.0タップ穴、M4とM6ザグリ穴を豊富に配列しています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
C1520 Support Documentation
C1520Ø1.5インチポストクランプ用アダプタープレート、2.5インチx2.5インチ(インチ規格)
¥5,088
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
C1520/M Support Documentation
C1520/MØ38 mmポストクランプ用アダプタープレート、63.5 mm x 63.5 mm(ミリ規格)
¥5,088
Today
Back to Top

Ø38 mm(Ø1.5インチ)ポスト用大型クランプ

Mounting Options
LabelDimensionsTypeCount
A1/4"-20 (M6)Tapped Hole71
B1/4" (M6)Counterbored Hole4
C#8 (M4)Counterbored Hole6

ポストクランプC1545/Mの前面プレートは取り外し可能で、様々なタップ穴とザグリ穴が開いています。このポストクランプと取付けプレートは、組み合わせて当社のØ38 mm(Ø1.5インチ)ポストに取り付けるよう設計されています。 

クランプには、ポストに固定するための簡単脱着ハンドルが付いています。長さ51.4 mmのハンドルにはM6ネジの付いたスタッドがあり、ハンドルを回転させるだけでポストに取り付けられます。内部のラチェット機構により、ハンドルの回転位置は取り付けたスタッドを動かさずに調整できます。

右の図ではタップ穴とザグリ穴をアルファベットで示しており、それぞれの寸法と種類を隣の表に記しています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
C1545 Support Documentation
C1545Ø1.5インチポスト用クランプ、大型、4.5インチx 4.5インチ(インチ規格)
¥14,973
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
C1545/M Support Documentation
C1545/MØ38 mmポスト用クランプ、大型、112.5 mm x 112.5 mm(ミリ規格)
¥14,973
Today
Back to Top

Ø38 mm(Ø1.5インチ)ポスト用大型クランプ用アダプタープレート

  • クランプC1545/Mに付属するプレートと同一製品
  • セットアップを簡単に交換可能にするプレート

このアダプタープレートは、アダプタープレート上のアセンブリが交換可能となるため、取付け用ポストクランプC1545/Mの汎用性が高まる部品です。 上の図のように、M6 x 1.0タップ穴、M4とM6ザグリ穴を豊富に配列しています。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
MB4A Support Documentation
MB4AØ1.5インチポストクランプ用アダプタープレート、大型、4.5インチ x 4.5インチ(インチ規格)
¥11,418
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
MB1111A/M Support Documentation
MB1111A/MØ38 mmポストクランプ用アダプタープレート、大型、112.5 mm x 112.5 mm(ミリ規格)
¥11,418
Today
Back to Top

Ø38 mm(Ø1.5インチ)ポスト用高さ調整カラー

PSHA on Post, Post Bracket
Click to Enlarge
ポスト用ブラケットC1515(/M)の下、Ø38 mm(Ø1.5インチ)ポストに取り付けられたPSHA(/M)
  • 移動量:1回転につき0.64 mm
  • 垂直方向の調整範囲:8.2 mm

Ø38 mm(Ø1.5インチ)ポスト用高さ調整カラーPSHA/Mは、ポストに取り付けられた部品の高さ調整に便利です。作動リングはアクセスが簡単で、1回転につき高さ0.64 mmの微調整を行います。 このカラーに取り付けられた部品の高さを変えずに、自由に回転することもできます。

使用するにはØ38 mm(Ø1.5インチ)ポストの上にカラーをかぶせ、所望の高さに保持します。カラーの位置はフレクシャークランプをM6キャップスクリュで締め付けて固定します。カラーの上にオプトメカニクスを置き、作動リングを回して部品の高さを調整します。高さを固定するには止めネジ(セットスクリュ)を2 mm六角レンチで締め付けます。カラー上部のナイロン製のリングは高さ調整時の摩耗を防ぎます。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
PSHA Support Documentation
PSHAØ1.5インチポスト用高さ調整カラー、1/4"-20固定ネジ(インチ規格)
¥10,416
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
PSHA/M Support Documentation
PSHA/MØ38 mmポスト用高さ調整カラー、M6 x 1.0固定ネジ(ミリ規格)
¥10,416
Today
Back to Top

簡単脱着ハンドル


Click for Details
左:ポスト取付け用クランプC1511(/M)に取り付けられた簡単脱着ハンドルC15QR(/M)。
右:ハンドル位置を回転するには後方に引いてください。

簡単脱着式ハンドルC15QR/Mを用いると、フレクシャー機構によるØ25.0 mm~Ø25.4 mmポスト用クランプまたはØ38 mm(Ø1.5インチ)ポスト用クランプを簡単にしっかりと固定できます。フレクシャー機構を用いた多くのポスト用クランプでは、ポストに固定するのにキャップスクリュが用いられますが、その調整にはボール(六角)ドライバが必要です。取り付けた荷重によっては、ボールドライバを使用するのが困難な場合があり、ときには危険な場合さえあります。簡単脱着式ハンドルを用いると、クランプを締めたり緩めたりするトルク量を手で確実に調整できるため、この種の問題を軽減することができます。また、ボールドライバを必要とせずにクランプを素早く固定できるため、組立てや調整に要する時間も短縮できます。

ハンドルはポストクランプのM6固定ネジと簡単に交換することができ、長さ51.4 mmのハンドルを回転させると係合するM6 x 1.0ネジ付きスタッドが付いています。ハンドルを締めてクランプをポストに固定したあとは、内部のラチェット機構により、固定されたスタッドを動かさずにハンドルの回転位置を調整できます。ハンドルは、外側に引くだけでネジ付きスタッドとの係合が外れ(右の写真参照)、ご希望の位置までハンドルを回転することができます。このためハンドルはどの位置からでも操作可能です。

+1 数量 資料 型番 - インチ規格 定価(税抜) 出荷予定日
C15QR Support Documentation
C15QR簡単脱着ハンドル、長さ2.03インチ、1/4"-20ネジ(インチ規格)
¥1,580
7-10 Days
+1 数量 資料 型番 - ミリ規格 定価(税抜) 出荷予定日
C15QR/M Support Documentation
C15QR/M簡単脱着ハンドル、長さ51.4 mm、M6 x 1.0ネジ(ミリ規格)
¥1,580
Today