| Part Number | Product Description |
| FPD310-F | High-Sensitivity PIN Detector, 850 - 1650 nm, Free Space, 1 MHz - 1.8 GHz |
| FPD310-FC-NIR | InGaAs Switchable Gain, High Sensitivity PIN Amplified Detector, 950 - 1650 nm, 1 MHz - 1.5 GHz |
| FPD310-FC-VIS | Si Switchable Gain, High Sensitivity PIN Amplified Detector, 400 to 1000 nm, 1 MHz - 1.5 GHz |
| FPD310-FS-NIR | InGaAs Switchable Gain, High Sensitivity PIN Amplified Detector, 950 - 1650 nm, 1 MHz - 1.5 GHz BW, 0.005 mm2, M4 Mounting Hole |
| FPD310-FS-VIS | Si Switchable Gain, High Sensitivity PIN Amplified Detector, 400 - 1000 nm, 1 MHz - 1.5 GHz BW, 0.13 mm2, M4 Taps |
| FPD310-FV | Si Switchable Gain, High Sensitivity PIN Detector, 400 - 1000 nm, 1 MHz - 1.5 GHz BW, 0.13 mm2, M4 Tap |
| FPD310-V | High Sensitivity Si PIN Detector, 400 to 1000 nm, Fiber Coupled, 1 MHz to 1.5 GHz |
| FPD510 | High-Sensitivity PIN Detector, 850 - 1650 nm, Fiber Coupled, DC - 250 MHz |
| FPD510-F | InGaAs Fixed Gain, High-Sensitivity PIN Amplified Detector, 850 - 1650 nm, DC - 200 MHz, 0.13 mm2, M4 Taps |
| FPD510-FC-NIR | InGaAs Fixed Gain, High Sensitivity PIN Amplified Detector, 950 - 1650 nm, DC - 250 MHz |
| FPD510-FC-VIS | Si Fixed Gain, High Sensitivity PIN Amplified Detector, 400 to 1000 nm, DC - 250 MHz |
| FPD510-FS-NIR | InGaAs Fixed Gain, High-Sensitivity PIN Amplified Detector, 950 - 1650 nm, DC - 250 MHz, 0.07 mm2, M4 Mounting Hole |
| FPD510-FS-VIS | Si Fixed Gain, High Sensitivity PIN Detector, 400 - 1000 nm, 250 MHz BW, 0.13 mm2, M4 Tap |
| FPD510-FV | Si Fixed Gain, High Sensitivity PIN Detector, 400 - 1000 nm, 250 MHz BW, 0.13 mm2, M4 Tap |
| FPD510-V | High Sensitivity Si PIN Detector, 400 to 1000 nm, Fiber Coupled, DC to 250 MHz |
| FPD610-FC-NIR | InGaAs Fixed Gain, High Sensitivity PIN Amplified Detector, 950 - 1650 nm, DC - 600 MHz |
| FPD610-FC-VIS | Si Fixed Gain, High Sensitivity PIN Amplified Detector, 400 to 1000 nm, DC - 600 MHz |
| FPD610-FS-NIR | InGaAs Fixed Gain, High-Sensitivity PIN Amplified Detector, 950 - 1650 nm, DC - 600 MHz, 0.005 mm2, M4 Mounting Hole |
| FPD610-FS-VIS | Si Fixed Gain, High Sensitivity PIN Detector, 400 - 1000 nm, 600 MHz BW, 0.13 mm2, M4 Tap |
| FPL1001C | 1550 nm, 150 mW Typical, Chip on Submount, Laser Diode |
| FPL1009P | 1550 nm, 100 mW, Butterfly Laser Diode, PM Fiber, FC/APC |
| FPL1009PXL | 1550 nm, 100 mW (Min), Butterfly Laser Diode, PM Fiber, FC/APC |
| FPL1009S | 1550 nm, 100 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL1009SXL | 1550 nm, 100 mW min, Butterfly Laser, SM Fiber, FC/APC |
| FPL1053C | 1310 nm, 300 mW Pulsed, Chip on Submount, Laser Diode |
| FPL1053P | 1310 nm, 130 mW, Butterfly Laser Diode, PM Fiber, FC/APC |
| FPL1053S | 1310 nm, 130 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL1053T | 1310 nm, 300 mW Pulsed, Ø5.6 mm, E Pin Code |
| FPL1054C | 1625 nm, 250 mW Pulsed, Chip on Submount, Laser Diode |
| FPL1054P | 1625 nm, 80 mW, Butterfly Laser Diode, PM Fiber, FC/APC |
| FPL1054S | 1625 nm, 80 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL1054T | 1625 nm, 250 mW Pulsed, Ø5.6 mm, E Pin Code |
| FPL1055C | 1550 nm, 300 mW Pulsed, Chip on Submount, Laser Diode |
| FPL1055T | 1550 nm, 300 mW Pulsed, Ø5.6 mm, E Pin Code |
| FPL1059C | 1650 nm, 225 mW Pulsed, Chip on Submount, Laser Diode |
| FPL1059P | 1650 nm, 80 mW, Butterfly Laser Diode, PM Fiber, FC/APC |
| FPL1059S | 1650 nm, 80 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL1059T | 1650 nm, 225 mW Pulsed, Ø5.6 mm, E Pin Code |
| FPL1940S | 1940 nm, 15 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL2000C | 2000 nm, 30 mW Typical, Chip on Submount, Laser Diode |
| FPL2000CM | 2000 nm, 30 mW, One-Tab C-Mount, Laser Diode |
| FPL2000S | 2000 nm, 15 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL785C | 785 nm, 300 mW, Chip on Submount, Laser Diode |
| FPL785CM | 785 nm, 300 mW, One-Tab C-Mount, Laser Diode |
| FPL785P-200 | 785 nm, 200 mW, Butterfly Laser Diode, PM Fiber, FC/APC |
| FPL785S-250 | 785 nm, 250 mW (Min), Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL808S | 808 nm, 250 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL830S | 830 nm, 350 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPL852S | 852 nm, 350 mW, Butterfly Laser Diode, SM Fiber, FC/APC |
| FPS300 | Fiber Preparation Station with Stripper and Cleaner for Ø80 µm to Ø400 µm Cladding |
| FPV785P | 785 nm, 50 mW, VHG Wavelength-Stabilized SF Laser Diode, Butterfly Package, PM Fiber, FC/APC, TEC and Thermistor, Internal Isolator |
| FPV785S | 785 nm, 50 mW, VHG Wavelength-Stabilized SF Laser Diode, Butterfly Package, SM Fiber, FC/APC, TEC and Thermistor, Internal Isolator |
| FPV852P | 852 nm, 20 mW, VHG Wavelength-Stabilized SF Laser Diode, Butterfly Package, PM Fiber, FC/APC, TEC and Thermistor, Internal Isolator |
| FPV852S | 852 nm, 20 mW, VHG Wavelength-Stabilized SF Laser Diode, Butterfly Package, SM Fiber, FC/APC, TEC and Thermistor, Internal Isolator |
| FPV976P | 976 nm, 30 mW, VHG Wavelength-Stabilized SF Laser Diode, Butterfly Package, PM Fiber, FC/APC, TEC and Thermistor, Internal Isolator |
| FPV976S | 976 nm, 30 mW, VHG Wavelength-Stabilized SF Laser Diode, Butterfly Package, SM Fiber, FC/APC, TEC and Thermistor, Internal Isolator |
| FR600HM | Mounted Half-Wave Fresnel Rhomb Retarder |
| FR600QM | Mounted Quarter-Wave Fresnel Rhomb Retarder |
| FRAV1 | Iridium Filament Assembly, ≤Ø200 µm Cladding |
| FRAV3 | Iridium Filament Assembly, ≤Ø400 µm Cladding |
| FRAV5 | Iridium Filament Assembly, Ø250 µm - Ø1050 µm Cladding |
| FRI61F50 | Fiber Ring Illuminator for OSL2 Fiber Light Source, WD = 50 - 170 mm |
| FRP0510 | Ø1/2" Fresnel Lens, f = 10 mm |
| FRP125 | Ø1" Fresnel Lens, f = 25 mm |
| FRP232 | Ø2" Fresnel Lens, f = 32 mm |
| FRP251 | Ø2" Fresnel Lens, f = 51 mm |
| FRU | THz Transmitter/Receiver Mounting Module |
| FRU/M | THz Transmitter/Receiver Mounting Module |
| FS-ER-7A28 | Single Mode Erbium Doped Fiber, C-Band |
| FS-ER-7B28 | Single Mode Erbium Doped Fiber, L-Band |
| FS-LS-4616 | Design Wavelength: 820 nm, 5.3 µm MFD, PM Fiber |
| FS-LS-7511 | 1550nm Single Mode PM Fiber: 3M |
| FS-PM-4611 | 820nm Single Mode PM Fiber: 3M |
| FS-PM-6811 | 1300nm Single Mode PM Fiber: 3M |
| FS-PM-7811 | 1550nm Single Mode PM Fiber: 3M |
| FS-SC-5624 | 980/1060 nm, 125 µm Cladding, 250 µm Jacket, <780nm Cut-off, 0.13 NA |
| FS-SC-5924 | 980/1060 nm, 125 µm Cladding , 250 µm Jacket, <950nm Cut-off, 0.24 NA |
| FS-SC-6324 | 1300 nm, 125 µm Cladding, 250 µm Jacket, <1270 nm Cut-off, 0.16 NA |
| FS-SC-7324 | 3M SM Fiber, 1550nm Wavelength, 7.8mm MFD |
| FS-SN-3224 | 3M SM Fiber, 630nm Wavelength, 4.0mm MFD |
| FS-SN-4224 | 3M SM Fiber, 820nm Wavelength, 5.5mm MFD |
| FS-TI-5129 | Tiger Polarization Maintaining Fiber, 980nm, 250um Buffer |
| FS1 | Face Shield |
| FS1-F | 10-Pack Replacement Foam Inserts |
| FS200 | Fiber Inspection Scope, FS200-FC and FS200-SMA Adapters Included |
| FS200-FC | FC-Type Connector Adapter for FS201 Fiber Inspection Scope |
| FS200-LC | LC-Type Connector Adapter for FS201 Fiber Inspection Scope |
| FS200-SMA | SMA-Type Connector Adapter for FS200 Fiber Inspection Scope |
| FS201 | Fiber Inspection Scope with FS200-FC and FS201-SMA Adapters |
| FS201-PM | FC-Type Connector Adapter with Key Alignment Groove for FS201 Fiber Inspection Scope |
| FS201-SMA | SMA-Type Connector Adapter for FS201 Fiber Inspection Scope |
| FS702 | 1 x 2 Fiber Optic Switch |
| FSAC | Autocorrelator for Femtosecond Lasers |
| FSC102 | V-Grooved Fiber Holder Axial Force Sensor for Multi-Axis Stages |
| FSC103 | Axial Force Sensor with Grooved Platform for Multi-Axis Stages |
| FSC103/M | Axial Force Sensor with Grooved Platform for Multi-Axis Stages, Metric |
| FSK1 | Fluorescent Microscope Slide, Blue, 1.7 mm Thick |
| FSK1-P5 | Fluorescent Microscope Slide, Blue, 1.7 mm Thick, 5 Pack |
| FSK2 | Fluorescent Microscope Slide, Green, 1.7 mm Thick |
| FSK2-P5 | Fluorescent Microscope Slide, Green, 1.7 mm Thick, 5 Pack |
| FSK3 | Fluorescent Microscope Slide, Yellow, 1.7 mm Thick |
| FSK3-P5 | Fluorescent Microscope Slide, Yellow, 1.7 mm Thick, 5 Pack |
| FSK4 | Fluorescent Microscope Slide, Orange, 1.7 mm Thick |
| FSK4-P5 | Fluorescent Microscope Slide, Orange, 1.7 mm Thick, 5 Pack |
| FSK5 | Fluorescent Microscope Slides, Set of 5 Colors |
| FSK6 | Fluorescent Microscope Slide, Red, 1.7 mm Thick |
| FSK6-P5 | Fluorescent Microscope Slide, Red, 1.7 mm Thick, 5 Pack |
| FSL1950F | 2 µm Femtosecond Fiber Laser |
| FSPC | Femtosecond Pulse Compressor |
| FSR1 | Storage Reel for Patch Cables with Ø900 µm Jackets |
| FSR1-P10 | Storage Reels for Patch Cables with Ø900 µm Jackets, 10 Pack |
| FSR3 | Storage Reel for Patch Cables with Ø3 mm Jackets |
| FSR3-P10 | Storage Reels for Patch Cables with Ø3 mm Jackets, 10 Pack |
| FST001 | Alexa 488 Excitation, Emission, and Dichroic Filters (Set of 3) |
| FST002 | GFP Excitation, Emission, and Dichroic Filters (Set of 3) |
| FST003 | CY3 Excitation, Emission, and Dichroic Filters (Set of 3) |
| FST004 | CY5 Excitation, Emission, and Dichroic Filters (Set of 3) |
| FST005 | Rhodamine Excitation, Emission, and Dichroic Filters (Set of 3) |
| FSX2000PM | Stand-Alone Fusion Splicer for SM, MM and PM Fiber - Base Unit |
| FT-1.0-EMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-1.0-UMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-1.0-URT | 0.48-NA TECS™ Hard Clad Multimode Fiber |
| FT-1.5-UMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-100X100 | Multi-Axis FiberBench, 4" x 4" (101.6 mm x 101.6 mm), 8 Ports, 24 Positions |
| FT-114X149 | Multi-Axis FiberBench, 114 mm x 149 mm, 10 Ports, 24 Positions |
| FT-200-EMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-200-UMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-200-URT | 0.48-NA TECS™ Hard Clad Multimode Fiber |
| FT-300-EMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-38X100 | Multi-Axis FiberBench, 38 mm x 100 mm, 5 Ports, 12 Positions |
| FT-38X135 | Multi-Axis FiberBench, 38 mm x 135 mm, 5 Ports, 14 Positions |
| FT-38X165 | Multi-Axis FiberBench, 38 mm x 165 mm, 8 Ports, 19 Positions |
| FT-38X229 | Multi-Axis FiberBench, 38 mm x 229 mm, 8 Ports, 21 Positions |
| FT-400-UMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-400-URT | 0.48-NA TECS™ Hard Clad Multimode Fiber |
| FT-51X60 | Multi-Axis FiberBench, 51 mm x 60 mm, 4 Ports, 16 Positions |
| FT-51X76 | Multi-Axis FiberBench, 51 mm x 76 mm, 6 Ports, 12 Positions |
| FT-600-EMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-600-URT | 0.48-NA TECS™ Hard Clad Multimode Fiber |
| FT-800-EMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-800-UMT | 0.39-NA Tecs Hard Clad Multimode Fiber |
| FT-EOMA | Adapter Bracket for EO Modulators and FiberBenches or PY005(/M) Stage |
| FT-MMAC | FiberBench Adapter for Standard Optomech Components |
| FT-SM05 | FiberBench Mounting Base for Ø1/2" Optics, Internal SM05 Threading |
| FT020 | Orange Reinforced Ø2 mm Furcation Tubing |
| FT020-BK | Black Reinforced Ø2 mm Furcation Tubing |
| FT020-Y | Yellow Reinforced Ø2 mm Furcation Tubing |
| FT023SS | Ø2.3 mm Stainless Steel Tubing |
| FT030 | Orange Reinforced Ø3 mm Furcation Tubing |
| FT030-BK | Black Reinforced Ø3 mm Furcation Tubing |
| FT030-BLUE | Blue Reinforced Ø3 mm Furcation Tubing |
| FT030-Y | Yellow Reinforced Ø3 mm Furcation Tubing |
| FT038 | Red Reinforced Ø3.8 mm Furcation Tubing |
| FT038-BK | Black Reinforced Ø3.8 mm Furcation Tubing |
| FT051SS | Ø5.1 mm Stainless Steel Tubing |
| FT05SS | Ø5.0 mm Stainless Steel Tubing |
| FT061PS | Ø6.1 mm Stainless Steel Tubing with Black Plastic Sheath |
| FT080SS | Ø8.0 mm Stainless Steel Tubing |
| FT1.0EMT | TEQS Hard Cladding Fiber, Low OH, 1000µm Core, 0.39 NA |
| FT1.0UMT | TEQS Hard Cladding Fiber, High OH, 1000µm Core, 0.39 NA |
| FT1.5EMT | TEQS Hard Cladding Fiber, Low OH, 1500µm Core, 0.39 NA |
| FT1.5UMT | TEQS Hard Cladding Fiber, High OH, 1500µm Core, 0.39 NA |
| FT1000EMT | 0.39 NA, Ø1000 µm Core Multimode Optical Fiber, Low OH for 400 - 2200 nm, TECS Clad |
| FT1000UMT | 0.39 NA, Ø1000 µm Core Multimode Optical Fiber, High OH for 300 - 1200 nm, TECS Clad |
| FT101 | 100 Ω Fixed Stub-Style BNC Terminator |
| FT102 | 1 kΩ Fixed Stub-Style BNC Terminator |
| FT103 | 10 kΩ Fixed Stub-Style BNC Terminator |
| FT104 | 100 kΩ Fixed Stub-Style BNC Terminator |
| FT1500EMT | 0.39 NA, Ø1500 µm Core Multimode Optical Fiber, Low OH for 400 - 2200 nm, TECS Clad |
| FT1500UMT | 0.39 NA, Ø1500 µm Core Multimode Optical Fiber, High OH for 300 - 1200 nm, TECS Clad |
| FT200EMT | 0.39 NA, Ø200 µm Core Multimode Optical Fiber, Low OH for 400 - 2200 nm, TECS Clad |
| FT200UMT | 0.39 NA, Ø200 µm Core Multimode Optical Fiber, High OH for 300 - 1200 nm, TECS Clad |
| FT254 | 250 kΩ Fixed Stub-Style BNC Terminator |
| FT300EMT | 0.39 NA, Ø300 µm Core Multimode Optical Fiber, Low OH for 400 - 2200 nm, TECS Clad |
| FT300UMT | 0.39 NA, Ø300 µm Core Multimode Optical Fiber, High OH for 300 - 1200 nm, TECS Clad |
| FT400EMT | 0.39 NA, Ø400 µm Core Multimode Optical Fiber, Low OH for 400 - 2200 nm, TECS Clad |
| FT400UMT | 0.39 NA, Ø400 µm Core Multimode Optical Fiber, High OH for 300 - 1200 nm, TECS Clad |
| FT500 | 50 Ω Fixed Stub-Style BNC Terminator |
| FT501 | 500 Ω Fixed Stub-Style BNC Terminator |
| FT502 | 5 kΩ Fixed Stub-Style BNC Terminator |
| FT503 | 50 kΩ Fixed Stub-Style BNC Terminator |
| FT600EMT | 0.39 NA, Ø600 µm Core Multimode Optical Fiber, Low OH for 400 - 2200 nm, TECS Clad |
| FT600UMT | 0.39 NA, Ø600 µm Core Multimode Optical Fiber, High OH for 300 - 1200 nm, TECS Clad |
| FT800EMT | 0.39 NA, Ø800 µm Core Multimode Optical Fiber, Low OH for 400 - 2200 nm, TECS Clad |
| FT800UMT | 0.39 NA, Ø800 µm Core Multimode Optical Fiber, High OH for 300 - 1200 nm, TECS Clad |
| FT900KB | Blue Ø900 µm Hytrel® Furcation Tubing with Kevlar® Threads |
| FT900KK | Black Ø900 µm Hytrel® Furcation Tubing with Kevlar® Threads |
| FT900KY | Yellow Ø900 µm Hytrel® Furcation Tubing with Kevlar® Threads |
| FT900SM | Yellow Ø900 µm Hytrel Tubing |
| FT900Y | Yellow Ø900 µm Hytrel® Furcation Tubing |
| FTAPC1 | FC/APC Fiber Optic Light Trap |
| FTAT3 | Graphite Filament Assembly, Ø250 µm - Ø1500 µm Cladding |
| FTAT4 | Graphite Filament Assembly, Ø400 µm - Ø1800 µm Cladding |
| FTAV2 | Graphite Filament Assembly, Ø80 µm - Ø250 µm Cladding |
| FTAV4 | Graphite Filament Assembly, Ø125 µm - Ø600 µm Cladding |
| FTAV5 | Graphite Filament Assembly, Ø250 µm - Ø1000 µm Cladding |
| FTAV6 | Graphite Filament Assembly, Ø400 µm - Ø1300 µm Cladding |
| FTB01 | Fluorine-Doped Fused Silica Capillary Tube, 1200 µm ID, 1450 µm OD, 170 mm Long |
| FTB02 | Fluorine-Doped Fused Silica Capillary Tube, 750 µm ID, 1500 µm OD, 170 mm Long |
| FTB03 | Fluorine-Doped Fused Silica Capillary Tube, 800 µm ID, 1100 µm OD, 170 mm Long |
| FTDU | Fiber Optic Disposal Unit |
| FTFC1 | FC/PC Fiber Optic Light Trap |
| FTH100-1064 | F-Theta Scan Lens, f = 100 mm, 1064 nm Design Wavelength, M85 x 1.0 |
| FTH160-1064 | F-Theta Scan Lens, f = 160 mm, 1064 nm Design Wavelength, M85 x 1.0 |
| FTH160-1064-M39 | F-Theta Scan Lens, f = 160 mm, 1064 nm Design Wavelength, M39 x 1.0 |
| FTH254-1064 | F-Theta Scan Lens, f = 254 mm, 1064 nm Design Wavelength, M85 x 1.0 |
| FTHA1 | 60 mm Cage System and SM3 Lens Tube Adapter for FTH100-1064 or FTH160-1064 Lenses |
| FTHA2 | 60 mm Cage System and SM3 Lens Tube Adapter for FTH254-1064 Lens |
| FTHW110-1064 | Protective Window for FTH254-1064 F-Theta Scan Lens |
| FTHW42-1064 | Protective Window for FTH160-1064-M39 F-Theta Scan Lens |
| FTHW75-1064 | Protective Window for FTH100-1064 and FTH160-1064 F-Theta Scan Lenses |
| FTK01 | Stub-Style BNC Terminator Kit, Set of 8 |
| FTS23A | Stainless Steel Sleeve for Ø2.3 mm Tubing, 0.138" - 0.150" ID |
| FTS23B | Stainless Steel Sleeve for Ø2.3 mm Tubing, 0.153" - 0.165" ID |
| FTS23D | Stainless Steel Sleeve for Ø2.3 mm Tubing, 0.178" - 0.190" ID |
| FTS3 | Stripping Tool for Ø3 mm and Ø3.8 mm Furcation Tubing |
| FTS3B | Replacement Blade Set for FTS3 (Three Straight Blades and One Round Blade) |
| FTS4 | Three-Hole Stripping Tool for Fiber Buffers and Jackets |
| FTS50A | Stainless Steel Sleeve for Ø5.0 mm Tubing, 0.138" - 0.150" ID |
| FTS50B | Stainless Steel Sleeve for Ø5.0 mm Tubing, 0.153" - 0.165" ID |
| FTS50D | Stainless Steel Sleeve for Ø5.0 mm Tubing, 0.178" - 0.190" ID |
| FTS61A | Stainless Steel Sleeve for Ø6.1 mm Tubing, 0.138" - 0.150" ID |
| FTS61B | Stainless Steel Sleeve for Ø6.1 mm Tubing, 0.153" - 0.165" ID |
| FTS61D | Stainless Steel Sleeve for Ø6.1 mm Tubing, 0.178" - 0.190" ID |
| FTS80A | Stainless Steel Sleeve for Ø8.0 mm Tubing, 0.138" - 0.150" ID |
| FTS80B | Stainless Steel Sleeve for Ø8.0 mm Tubing, 0.153" - 0.165" ID |
| FTS80D | Stainless Steel Sleeve for Ø8.0 mm Tubing, 0.178" - 0.190" ID |
| FTSB1 | 304 SS Sleeve for High-Temperature, Vacuum-Compatible SMA905 Connectors |
| FTV7 | Tungsten Fusion Splicing Filament for the FSX2000PM and FFS Series |
| FW102A | Six-Position Filter Wheel for Ø1" Optics |
| FW102B | Six-Position Motorized Filter Wheel with USB |
| FW102C | Six-Position Motorized Filter Wheel for Ø1" (Ø25 mm) Optics |
| FW102C-EC | Six-Position Motorized Filter Wheel for Ø1" (Ø25.4 mm) Optics, 230 VAC Power Cord |
| FW102CNEB | Six-Position Motorized Filter Wheel for Ø1" (Ø25 mm) Optics with Preloaded ND Filters |
| FW102CW | 6-Position Filter Wheel for Ø1" Optics |
| FW102CWNEB | 6-Position Filter Wheel for Ø1" Optics with Preloaded ND Filters |
| FW103 | High-Speed Motorized Filter Wheel |
| FW103/M | High-Speed Motorized Filter Wheel |
| FW103H | Motorized Filter Wheel with High-Current BSC201 Controller, 8-32 Taps |
| FW103H/M | Motorized Filter Wheel with High-Current BSC201 Controller, M4 Taps |
| FW103S | Motorized Filter Wheel with Low-Current Controller TST001 |
| FW103S/M | Motorized Filter Wheel with Low-Current Controller TST001 |
| FW104 | High-Speed Filter Wheel for Dichroic Mirrors |
| FW1A | Filter Wheel Station for Ø1" Filters, One Wheel, 6 Filter Capacity |
| FW1AB | Extra Filter Wheel for Ø1" Filters, 6 Filter Capacity |
| FW1ADF | Filter Wheel with all six 1" diameter Dichroic Color Filters |
| FW1AND | Six Station Single Filter Wheel for Ø1" (Ø25 mm) Filters with Base Assembly, 5 ND Filters Included |
| FW212A | 12-Position Filter Wheel for Ø1/2" Optics |
| FW212B | 12-Position Motorized Filter Wheel with USB |
| FW212C | Twelve-Position Motorized Filter Wheel for Ø1/2" (Ø12.5 mm) Optics |
