半導体レーザーコリメート用チューブ、集光チューブ


  • Collimation and Focusing Tubes for Laser Diodes
  • Aspheric Optics Premounted in Ø15 mm Aluminum Tubes

LT230220P-B

Focusing Tube with Optic

LT110P-B

Collimation Tube with Optic
(Laser Diode Sold Separately)

LTN330-C

Adjustable Laser Diode Collimation Tube with Optic

Related Items


Please Wait

当社のコリメート用チューブならびに集光チューブは、アダプタAD15Fを使用してSM1ネジ付きケージプレートCP33(/M)に取り付け可能です。

特長

  • TO Can型半導体レーザ向けコリメート用チューブ、集光チューブ
  • 当社の静電気放電(ESD)防止&ストレインリリーフケーブルに対応

当社ではコリメートまたは集光の用途向けに、予め非球面レンズが組み込まれたコリメート用(または集光用)半導体レーザーマウントをご用意しております。マウントは、当社の静電気放電(ESD)防止&ストレインリリーフケーブル(下記参照)が取り付け可能です。低出力のØ5.6 mmまたはØ9 mm半導体レーザーパッケージに適用できます。アクティブ冷却は行いません。アダプタAD15NTを使用してキネマティックマウントKM100をはじめとする標準的なØ25 mm~Ø25.4 mm(Ø1インチ)マウントにも使用可能です。またアダプタAD15FまたはAD15F2でSM1ネジ付きレンズチューブやオプトメカニクスにも取り付けられます。

Adjustable Laser Diode Collimation Tubes and Optics
Item #AR
Coating Range
Effective
Focal Length
Numerical
Aperture
Aspheric OpticLens InfoMinimum
Package Length
LTN330-A350 - 700 nm3.1 mm0.68354330-Ainfo icon0.87" (22 mm)
LTN330-B600 - 1050 nm3.1 mm0.68354330-Binfo icon0.87" (22 mm)
LTN330-C1050 - 1700 nm3.1 mm0.68354330-Cinfo icon0.87" (22 mm)
Laser Diode Collimation Tubes and Optics (for 650 - 1050 nm)
Item #AR
Coating Range
Effective
Focal Length
Numerical
Aperture
Aspheric OpticLens InfoPackage Length
LT230P-B650 - 1050 nm4.51 mm0.55A230TM-Binfo0.75" (19 mm)
LT110P-B6.24 mm0.40A110TM-Binfo0.85" (22 mm)
LT240P-B8.00 mm0.50A240TM-Binfo0.95" (24 mm)
LT220P-B11.0 mm0.26A220TM-Binfo1.00" (25 mm)
Adjustable Laser Diode Focusing Tubes and Optics (for 600 - 1050 nm)
Item #AR
Coating Range
Effective
Focal Length
Numerical
Aperture
Aspheric Optic PairComponent
Lens Info
Package Lengtha
LT230220P-B600 - 1050 nm4.51 mmLaser Side: 0.55
Focus Side: 0.25
C230220P-Binfo0.8" (20.3 mm)
info
LT230260P-BLaser Side: 0.55
Focus Side: 0.16
C230260P-Binfo
info
  • この長さには、筐体からレンズが突き出した部分の長さは含まれておりません。

Insights:ビーム解析

こちらのページでは下記について説明しています。

  • チョッパーホイールを使用したビームサイズ測定

このほかにも実験・実習や機器に関するヒントをまとめて掲載しています。こちらからご覧ください。

 

チョッパーホイールを使用したビームサイズ測定

 

Arc length of a beam spot, as defined by the parameters of a chopper wheel.
Click to Enlarge

図2:ブレードはfの角回転速度で、 の弧(Rはブレード中心からの距離)をトレースします。図のチョッパーホイールは、MC1F2です。 

Chopper wheel setup used to estimate beam diameter.
Click to Enlarge

図1:上記に示すセットアップでおおよそのビームサイズの測定が可能です。チョッパーホイールのブレードがビームを横切るとき、S字状の曲線がオシロスコープに現れます。

Gaussian beam intensity profile with 1/e2 diameter noted.
Click to Enlarge

図4:ガウシアンビームの直径は1/e2強度の幅で表されます。

Rising edge of S-curve used to estimated beam diameter..
Click to Enlarge

図3:信号の立ち上がり時間(tr )は、通常、強度の10%~90%の時間で定義されます。立ち上がり時間はホイールの回転速度とビーム径に依存します。

カメラや走査スリット型ビームプロファイラはビームサイズやビーム形状を特性化するツールですが、ビームサイズが小さすぎたり、動作範囲外の波長においては正確な測定を行うことができません。

ビームサイズの正確な測定にはチョッパーホイールやフォトディテクタ、オシロスコープが使用されます(図1)。回転するチョッパーホイールがビームを通過すると、S字状の軌跡がオシロスコープに表示されます。

ブレードがθ の角度を掃引すると、S曲線の立ち上がりまたは立ち下がり時間は、ブレードの移動方向に沿ったビームのサイズに比例します(図2)。 ホイールの中心からR の距離にあるブレードエッジ上の点は、ビームサイズにほぼ等しい弧の長さ分(Rθ )、ビームを横切ります。

このビームサイズ測定をするためには、ディテクタとオシロスコープを合わせた応答を、信号の変化の速度よりもはるかに速くする必要があります。

例:S曲線の立ち上がりエッジ
ビームに関連する角度(θ = ft)は、信号の立ち上がり時間(図3)や、ホイール回転周波数(f または回転/秒)に依存します。ビームを通る弧長( = R ⋅ ft)は、この角度を使用して求められます。小さなガウシアン状のビームにおいては、一次近似の1/eビーム径()は、

10%~90%の強度間で定義されたビーム径の1.56倍となります。

最終更新日:2021年6月22日
Content improved by our readers!


Posted Comments:
Li-Bang Wang  (posted 2021-10-08 01:09:15.343)
It is very inconvenient that I cannot buy the tube with A coating lens. The lens has to be bought separately and the B-coating lens in the tube is wasted.
YLohia  (posted 2021-10-11 02:19:35.0)
Hello, thank you for your feedback. We're sorry to hear about the inconvenience caused by the lack of coating options. We will consider offering various AR-coated versions of these collimation tubes in the future.
user  (posted 2020-08-25 10:07:45.0)
I have you collimating tube LTN330-A. Will it be compatibile with USHIO laser diode: HL65213HDhttps://www.ushio.eu/659nm-biomedical-laser-diode/ ?
YLohia  (posted 2020-08-25 10:19:03.0)
Hello, thank you for contacting Thorlabs. The HL65213HD is a 9mm TO-can laser diode so, yes, the LTN330-A will be compatible with this item.
user  (posted 2019-08-07 07:30:57.453)
Hi, is it possible to mount the Focusing Tube with Optic (LT230220P-B) on the Laser Diode Mount with Integrated TEC and Controller (LDM9T/M)? thank you
YLohia  (posted 2019-08-07 04:01:20.0)
Hello, thank you for contacting Thorlabs. We do not recommend using the LT230220P-B with the LDM9T (as well as our current LDM series of mounts) as it defeats the purpose of using the special temperature control features of the mount. The C230220P-B collimation lens can be used with the S1TM09 adapter with the LDM9T.
user  (posted 2019-04-19 02:42:44.117)
It would be great if you put LT110P-C in the category. otherwise I don't know how to order if I want different coating on the lens.
YLohia  (posted 2019-04-19 09:56:55.0)
Hello, we do have the ability to offer custom coatings on our lenses. For inquiries on custom items, please email techsupport@thorlabs.com for a quote.
thutches  (posted 2017-11-29 14:06:54.447)
Couldn't find details about the lens that is prepackaged in the LTn330-A unit. Can you (anyone) help me with a Zemax file or other information? Thanks
nbayconich  (posted 2017-12-01 04:38:31.0)
Thank you for contacting Thorlabs. The lens used in the LTN330-A is the 354330-A Geltech asphere. The Zemax files for these collimation tubes can be found under the Specs tab located on the Laser Diode Collimation and Focusing Tubes page.
ytoh  (posted 2017-07-22 22:21:28.85)
On line 4, the principal plane to mounting surface is listed as 8.7mm. However, the math does not add up. I think this is incorrect and 8.7mm is the correct distance for the LT110P-B?
tcampbell  (posted 2017-12-29 11:20:53.0)
Hello, thank you for contacting Thorlabs. We have updated this value for several of our laser diode collimation tubes. The correct distance can now be found on the mechanical drawings.
mitch  (posted 2016-08-28 07:36:18.443)
Hi I have purchased several LTN330-B but I am wondering if they will work with a TO-46 package laser diode? Will the TO-46 fit into the adapter ring?
tfrisch  (posted 2016-09-06 03:20:43.0)
Hello, thank you for contacting Thorlabs. I have reached out to you directly, but the TO-46 package will not fit.
user  (posted 2015-08-27 05:46:50.68)
Dear Sir or Madam, I tried to collimate a L785P090 diode using the LN330-B. What I see is that the beam gets like cut on one side and shows strong diffraction at larger distances. My guess was that is most likely a sign that the output facet of the diode is not centered on the lens. Is there way to align the diode somehow ? Thanks and Regards, Christoph
besembeson  (posted 2015-09-25 05:40:38.0)
Response from Bweh at Thorlabs USA: Please contact me at techsupport@thorlabs.com for us to discuss this.
wenxingpath  (posted 2015-08-27 15:44:50.033)
To Whom It May Concern, I have a question with your product “LTN330-B Adjustable Laser Diode Collimation Tubes and Optics”. I would like to buy LTN330-B to collimate your Laser Diode L785P090 to get a output collimated beam with 2mm diameter. Is it possible? And if it is ok, may I use this LTN330-B to collimate Laser Diode with 850nm or 900nm output wavelength to get a collimated beam with 2mm or 3mm diameter? Thanks and looking forward to your response. Best regards Leo
besembeson  (posted 2015-09-28 05:55:16.0)
Response from Bweh at Thorlabs USA: That will not be suitable. The lens that comes with the LTN330-B has a focal length too short. It will be about 0.6mm output beam diameter. The wavelengths will be okay (considering the -B AR coating) but you will need an aspheric lens with a working distance of about 8mm. We have these at the following link: http://www.thorlabs.us/newgrouppage9.cfm?objectgroup_id=3811&pn=354330-B#4438
bonin  (posted 2015-02-25 00:12:29.33)
What size laser beam diameter does the LTN330-A collimation package provide when the output laser beam is collimated? Also, how circularized is the output beam? Thanks
jlow  (posted 2015-02-25 03:08:39.0)
Response from Jeremy at Thorlabs: The output beam diameter is going to be dependent on the divergence of your laser diode. The effective focal length of the aspheric lens used is about 3.1mm so that can be used to estimate the collimated output beam diameter. The aspheric lens does not circularized the beam.
lovecrazydog  (posted 2014-06-17 11:32:18.383)
How much current/heat can be allowed for these products?
jlow  (posted 2014-07-29 03:55:37.0)
Response from Jeremy at Thorlabs: There's no temperature regulation for these collimation tube so it should be used for low-power LD only. The max. current would depend on the individual laser diode you are using.
hagdes  (posted 2014-02-04 13:07:58.087)
Hello, I would like tu buy some laser diode collimator for a diode laser centered at 975 nm and 500 mW as maximun power. I heve seen in the website that you have four products that could meet the requeriments LT110P-B, LT220P-B, LT230P-B and LT240P-B . I would be very glad if you can suggest me any product. The laser diode is from axel photonics. Please follow this link for datasheet, http://www.axcelphotonics.com/images_clients/pdf/980nm_Multi_Mode_Specs_50um_.pdf Thank you
jlow  (posted 2014-02-04 01:29:25.0)
Response from Jeremy at Thorlabs: I will contact you to get more information on your application such as beam diameter requirement, can package of your laser diode, and the way you are mounting/driving it.
user  (posted 2011-08-08 05:53:43.0)
I dont understand why you dont add LT230P-A and LT230P-C to your product lists. Although the tube and lens can be ordered separately by contacting your representatives, it will be easier to shop on line and pay by credit card if the one with different coatings has its own part number.
jjurado  (posted 2011-07-12 10:39:00.0)
Response from Javier at Thorlabs to metz: Thank you very much for contacting us. We can certainly offer the LT230P-B collimation tube without the optic. I will contact you directly with a quotation.
metz  (posted 2011-07-12 16:19:52.0)
Hi: I would like to buy only the collimation tube, which is included in the collimation package "LT230P-B". Is this possible? Best regards, Jonas Metz
jjurado  (posted 2011-02-16 11:37:00.0)
Response from Javier at Thorlabs to last poster: Thank you very much for pointing this error out. We will rectify the information on the drawing shortly.
user  (posted 2011-02-15 21:19:30.0)
for information theres a mistake (that almost got me !) on the AutoCAD PDF file of the collimation tube LT240 (8mm FL): the internal thread is M12x0.5, not M9 as indicated.
user  (posted 2010-02-05 02:25:35.0)
it will be great if you can have separate part number for the tubes, and does not include the lens so people can order online easily
info  (posted 2009-08-08 04:49:37.0)
Dear Sir / Madam, I saw your website and impressed by Laser Diode Collimators products. We try to manufacture prototype laser rangefinder with diode laser that specified below. For this we need an optics unit to reduce beam divergence to 0.5 mrad. We search some companies and find your system can be useful for ours. If you can support us we hare very glad to hear about your suggestion. We have a diode laser that specification as below: 1. Partnumber: 905D3S3J08R 2. Company: Laser Components 3. Wavelength: 905 nm 4. Peakpower: 210 W 5. Beam Spread (50% peak intensity) Parallel: 11 degrees Perpendicular: 25 degrees 6. Emitting Area: 200 um* 250 um 7. Package: R= 9 mm CD 8. Laser windows Thickness: 0.25 mm 9. Datasheet: http://www.lasercomponents.com/uk/fileadmin/user_upload/home/Datasheets/lcc/905d3j09.pdf 10. Quantity: 5 pcs I appreciate it if you could give me an estimate of the cost and some information about delivery time, Shipping. Thanks & Best regards
klee  (posted 2009-06-26 14:40:32.0)
A response from Ken at Thorlabs to futia: We can offer special collimation tubes with C-coated (1050 - 1600 nm) lenses. Please send an email to techsupport@thorlabs.com, indicating which of the 4 tubes you need, and we will send you a quote.
futia  (posted 2009-06-26 14:31:00.0)
It would be useful if ThorLabs sold Collimation Tubes with optics coated for 1050 to 1500nm as well.
Greg  (posted 2009-04-10 08:18:18.0)
A response from Greg at Thorlabs to aidi: The LT230P-B is compatible with the SR9A-DB9, but neither is compatible with the ITC502. In order to temperature controller your laser, you need a TEC element. If you are looking for a collimated laser that you can also temperature control, I suggest looking at our Fiber Pigtailed Lasers and using one with our TCLDM9 TEC mount. You will then need a laser diode driver and TEC controller. If you have further questions, please let me know via e-mail.
aidi  (posted 2009-04-09 21:12:24.0)
Is this SR9A-DB9 can work together with LT230P-B collimation tube and ITC502 Temperature controller? Thank you
Laurie  (posted 2009-02-25 08:07:33.0)
Response from Laurie at Thorlabs to aidi: Thank you for considering Thorlabs as the solution to your optical and photonic needs. For collimating the output of a laser diode, you will want to consider the following points when selecting the optimal focal length: (1) Be sure to select a lens with an NA equal to or larger than that of your diode. This diode has a maximum NA of .423. (2) From the lenses with an appropriate NA, select the correct focal length for your application. A longer focal length will equate to a larger diameter beam with a smaller divergence angle. A shorter focal length will have a smaller output beam diameter, but it will have a larger angle of divergence. Both the LT230P-B and the LT240P-B has the appropriate NA and AR coating for your wavelength.
aidi  (posted 2009-02-19 03:43:53.0)
I have L780P010 laser diode. Which collimating item is suitable for me so that the output laser can transmit and focus properly? And what others accesories needed? Thank you.
Tyler  (posted 2009-01-08 16:32:01.0)
A response from Tyler at Thorlabs to melsscal: One more thing, the SR9A is compatible with the TLD001.
Tyler  (posted 2009-01-08 16:30:10.0)
The LPS-635-FC can be used with the SR9A. However, we generally recommend a laser diode mount with temperature control (TCLDM9) when driving a pigtailed laser diode. Fluctuations in temperature can affect the stability of the laser output. If the laser diode is being operated near the maximum current limit, temperature fluctuations could lead to the maximum current being exceed, which would cause the LD to burn out. Thank you for your question and if we can be of any further service please feel free to ask.
melsscal  (posted 2009-01-08 07:38:06.0)
Dear Sir,Can I connect the LPS-635-FC to SR9A ? Regards A.K.Bose MELSS, KOLKATA melsscal@melss.com
melsscal  (posted 2009-01-08 07:35:22.0)
can we USE the SR9A-DB9 TO connect the LPS-635-FC to the TLD001 ? Regards A.K.Bose MELSS KOLKATA/INDIA melsscal@melss.com
ghegenbart  (posted 2008-11-28 08:46:07.0)
Response from Gerald (Tech Support Thorlabs GmbH Germany) to M. Zimmermann: On the beam output side there is a rubber O-ring that provides friction fit of the mounted lens. The diameter of the groove the O-ring sits in is about 14.0 mm in case of the LT240P and about 12.3 mm for the other types. So it is not possible to have SM05 threads at that end. However, on the laser diode side the internal diameter of the opening is about 9.7 mm. So indeed having SM05 threads there would be feasible. Those threads would give mounting options in particular for very small setups that the current product in combination with the AD15F does not provide. So thank you very much for this very valuable feedback. I will suggest to modify the product.
m.zimmmermann  (posted 2008-11-28 05:19:54.0)
Is it possible to make a thread outside of one or both sides of the LT110P-B (or other modules) so that the customer can adapt this item to the lens tube system SM05? This would be very helpful.
Tyler  (posted 2008-03-27 08:14:18.0)
Response from Tyler at Thorlabs to rachel: The A110TM-C can be installed in the LT110P-B. However, since the LT110P-B includes a collimation lens, it would be better to contact our technical support department and get a custom quote for a collimation tube with the A110TM-C as the collimation optic. One other note, the ML725B8F has a D-type pin configuration, so the proper laser diode mount would be the SR9D-DB9, not the SR9A-DB9. Thank you for your interest in our products.
rachel  (posted 2008-03-24 21:57:09.0)
Dear sir, I would like to purchase ML725B8F 1310nm laser diode, LT110P-B and SR9A-DB9. But I confirm if aspheric optic can be installed A110TM-C(AR Coated 1050-1550nm) in LT110P-B. Thanks! I am looking forward to hearing from you soon. Rachel Chen Hortek Crystal Co., Ltd.
Back to Top

調整機能付き半導体レーザーコリメート用チューブ&レンズ

Adjustable Laser Diode Collimation Tube and SR9 Wire
Click to Enlarge

調整機能付き半導体レーザーコリメート用チューブは、SR9シリーズの静電気放電(ESD)防止&ストレインリリーフケーブルに取り付け可能です。
  • 半導体レーザーソケット付きのストレインリリーフケーブル(下記参照)取付け用コリメート光学素子付きレンズマウント、調整機能付き
  • 付属の固定リングによってØ5.6 mmまたはØ9 mmの半導体レーザを固定
  • コリメータ用非球面レンズの広帯域ARコーティングは3種類から選択可能:
    • Aコーティング:350 nm~700 nm
    • Bコーティング:600 nm~1050 nm
    • Cコーティング:1050 nm~1700 nm
  • ロッキングリング付きの回転式キャップにより、光軸方向への2.5 mmのレンズ移動とこれによる焦点調整が可能
  • 内容:マウント付きレンズを取り付けたチューブ本体、固定リング、Ø5.6 mmパッケージ用のアダプターキット
  • Ø25.4 mm(Ø1インチ)アダプタAD15NTやSM1ネジ付きアダプタAD15FまたはAD15F2を使用してØ15 mmチューブを取付け可能
  • 半導体レーザ用固定リングはスパナレンチSPW301およびSPW801に対応

調整機能付き半導体レーザーコリメート用チューブには、非球面レンズ(コリメート用光学素子)が予め取り付けられています。レンズは、チューブの端についているキャップを回転させることにより、最大2.5 mmまでの位置調整が可能です。調整後のレンズ位置は外側のロッキングリングで固定できます。5°のキャップの回転は、レンズの変位量5.5 µmに相当します。また、キャップに刻印された目盛により、レンズの正確な位置決めが可能です。レンズは、照射の安定性を向上させるために、チューブ内を回転せずに移動します。レンズの移動範囲が大きいため、これらのコリメート用チューブは、ARコーティング(A、B、Cコーティング)の範囲内で発光する当社のすべての半導体レーザのコリメートに使用できます。ただし、コリメート用チューブ内のレンズを交換することはできません。

スパナレンチSPW301は、コリメート用チューブ内のすべてのØ5.6 mmまたはØ9 mmの半導体レーザを取り付ける際にお使いいただけます。Ø9 mmの半導体レーザは、付属の固定リングを用いてチューブ内に直接取り付けることが可能ですが、Ø5.6 mmの半導体レーザは、付属のアダプターキットを使用して取り付けます。

半導体レーザの温度について
このコリメート用チューブは温度調節機能や温度測定機能を備えていません。そのため、温度調節機能を追加設置せずに高出力の半導体レーザとご使用いただくことはお勧めいたしません。高い動作温度で半導体レーザを駆動いただくと寿命が大幅に短くなります。

取付けオプション
当社の調整機能付き半導体レーザーコリメート用チューブは、アダプタAD15NTを使用してキネマティックマウントKM100内に固定できます。また、アダプタAD15Fを使用してSM1ネジ付きマウントに取り付け可能です(ページ上部の動画をご参照ください)。ただし、コリメート用チューブ外側のロッキングリングの外径はこのアダプタ内にはまりません。そのため、チューブはアダプタに対して一方向にしか設置できず、またアダプタ内を完全に貫通することができません。したがって、半導体レーザーソケットはコリメート用チューブに接続する前にアダプタ内に通しておく必要があります。また、ロッキングリングを取り外す際は、先にチューブのエンドキャップを取り外してください。ほかの取付け方法として、コリメート用チューブをキネマティックV字型マウントKM100V/Mに固定することもできます。

Specifications
Item #AR
Coating Range
Effective
Focal Length
Numerical
Aperture
Aspheric OpticLens InfoMinimum
Package Length
LTN330-A350 - 700 nm3.1 mm0.68354330-Ainfo icon0.87" (22 mm)
LTN330-B600 - 1050 nm3.1 mm0.68354330-Binfo icon0.87" (22 mm)
LTN330-C1050 - 1700 nm3.1 mm0.68354330-Cinfo icon0.87" (22 mm)
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
LTN330-A Support Documentation
LTN330-AAdjustable Collimation Tube with Optic for Ø5.6 and Ø9 mm Laser Diodes, f = 3.1 mm, NA = 0.68, AR Coated: 350 - 700 nm
¥40,351
Today
LTN330-B Support Documentation
LTN330-BAdjustable Collimation Tube with Optic for Ø5.6 and Ø9 mm Laser Diodes, f = 3.1 mm, NA = 0.68, AR Coated: 600 - 1050 nm
¥40,351
Today
LTN330-C Support Documentation
LTN330-CAdjustable Collimation Tube with Optic for Ø5.6 and Ø9 mm Laser Diodes, f = 3.1 mm, NA = 0.68, AR Coated: 1050 - 1700 nm
¥40,351
Today
Back to Top

半導体レーザーコリメート用チューブ&レンズ、650~1050 nm用

LT Collimation Tube and SR9 Wire
Click to Enlarge

半導体レーザーコリメート用チューブは、SR9シリーズの静電気放電(ESD)防止&ストレインリリーフケーブルに取付け可能です。
  • 半導体レーザーソケット付きのストレインリリーフケーブル(下記参照)取付け用コリメート光学素子付きレンズマウント
  • 付属の固定リングによってØ5.6 mmまたはØ9 mmの半導体レーザを固定
  • 650~1050 nm用ARコーティング付きの非球面コリメート用レンズ
  • 内容:チューブ本体、光学素子、固定リング、ゴム製Oリング、およびØ5.6 mmパッケージ用アダプタ
  • Ø25.4 mm(Ø1インチ)アダプタAD15NTやSM1ネジ付きアダプタAD15FまたはAD15F2を使用してØ15 mmチューブを取付け可能
  • 半導体レーザ用固定リングはスパナレンチSPW301およびSPW801に対応

ほかの波長域とコリメート用光学素子
半導体レーザーコリメート用チューブには、非球面レンズ(コリメート用光学素子)が予め取り付けられています。しかし異なる波長ではほかの非球面レンズに交換した方が高い性能を示す場合があります。当社のM9 x 0.5ネジマウント付き非球面レンズはすべて、コリメート用チューブLT110P-B、LT220P-B、LT230P-Bに対応し、M12 x 0.5ネジマウント付き非球面レンズはすべて、コリメート用チューブLT240P-Bに対応します。またこれらの2つのサイズの非球面レンズはそれぞれスパナレンチSPW301またはSPW302を使用して、取り外しや取り付けが可能です。非球面レンズ無し、または異なるレンズを付けたコリメート用チューブをご希望の場合は、当社までご連絡ください。

半導体レーザの温度について
このコリメート用チューブは温度調節機能や温度測定機能を備えていません。そのため、温度調節機能を追加設置せずに高出力の半導体レーザとご使用いただくことはお勧めいたしません。高い動作温度で半導体レーザを駆動いただくと寿命が大幅に短くなります。

Specifications
Item #AR
Coating Range
Effective
Focal Length
Numerical
Aperture
Aspheric OpticLens InfoPackage Length
LT230P-B650 - 1050 nm4.51 mm0.55A230TM-Binfo0.75" (19 mm)
LT110P-B6.24 mm0.40A110TM-Binfo0.85" (22 mm)
LT240P-B8.00 mm0.50A240TM-Binfo0.95" (24 mm)
LT220P-B11.0 mm0.26A220TM-Binfo1.00" (25 mm)
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
LT230P-B Support Documentation
LT230P-BCollimation Tube with Optic for Ø5.6 and Ø9 mm Laser Diodes, f = 4.51 mm, NA = 0.55, AR Coated: 650 - 1050 nm
¥24,797
Today
LT110P-B Support Documentation
LT110P-BCollimation Tube with Optic for Ø5.6 and Ø9 mm Laser Diodes, f = 6.24 mm, NA = 0.40, AR Coated: 650 - 1050 nm
¥24,797
Today
LT240P-B Support Documentation
LT240P-BCollimation Tube with Optic for Ø5.6 and Ø9 mm Laser Diodes, f = 8.00 mm, NA = 0.50, AR Coated: 650 - 1050 nm
¥24,797
Today
LT220P-B Support Documentation
LT220P-BCollimation Tube with Optic for Ø5.6 and Ø9 mm Laser Diodes, f = 11.0 mm, NA = 0.26, AR Coated: 650 - 1050 nm
¥24,797
Today
Back to Top

半導体レーザー集光用チューブ&レンズ、焦点調整可能、600~1050 nm用

LT Collimation Tube and SR9 Wire
Click to Enlarge

半導体レーザーコリメート用チューブは、SR9シリーズの静電気放電(ESD)防止&ストレインリリーフケーブルに取付け可能です。
  • 半導体レーザーソケット付きのストレインリリーフケーブル(下記参照)取付け用焦点調整型レンズマウント
  • 付属の固定リングによってØ5.6 mmまたはØ9 mmの半導体レーザを固定
  • 600~1050 nm用ARコーティング付きの非球面集光レンズ
  • 内容:チューブ本体、光学素子、固定リング、ゴム製Oリング、およびØ5.6 mmパッケージ用アダプターキット
  • Ø25.4 mm(Ø1インチ)アダプタAD15NTやSM1ネジ付きアダプタAD15FまたはAD15F2を使用してを使用してØ15 mmチューブを取付け可能
  • 半導体レーザ用固定リングおよび非球面レンズペアはスパナレンチSPW301およびSPW801に対応

こちらの半導体レーザ集光用パッケージは、上記の半導体レーザコリメート用チューブ&レンズと似ていますがレーザの出力を集光するための非球面レンズペアが含まれています。焦点はマウント付きレンズペアをねじ込む深さで調整できます。また、下記でご紹介しているSR9シリーズの半導体レーザーソケットに対応しています。

半導体レーザの温度について
この集光用チューブは温度調節機能や温度測定機能を備えていません。そのため、温度調節機能を追加設置せずに高出力の半導体レーザとご使用いただくことはお勧めいたしません。高い動作温度で半導体レーザを駆動いただくと寿命が大幅に減少します。

Specifications
Item #AR
Coating Range
Effective
Focal Length
Numerical
Aperture
Aspheric Optic PairComponent
Lens Info
Package Lengtha
LT230220P-B600 - 1050 nm4.51 mmLaser Side: 0.55
Focus Side: 0.25
C230220P-Binfo0.8" (20.3 mm)
info
LT230260P-BLaser Side: 0.55
Focus Side: 0.16
C230260P-Binfo
info
  • この長さには、先端部から突き出たレンズ部分の長さは含まれません。
+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
LT230220P-B Support Documentation
LT230220P-BFocusing Tube with Optic Pair for Ø5.6 and Ø9 mm Laser Diodes, f = 4.51 mm, Laser Side NA = 0.55, AR Coated: 600 - 1050 nm
¥43,285
7-10 Days
LT230260P-B Support Documentation
LT230260P-BFocusing Tube with Optic Pair for Ø5.6 and Ø9 mm Laser Diodes, f = 4.51 mm, Laser Side NA = 0.55, AR Coated: 600 - 1050 nm
¥43,285
7-10 Days
Back to Top

静電気放電(ESD)防止&ストレインリリーフケーブル

Item #
Prefixa
Supported
Pin Style
Component
Socket
Max LD
Forward
Voltage
SR9AA and ES80603.3 V
SR9BB and HS8060
SR9CC and HS8060
SR9DDS8060-4
SR9FF and GS8060-4
SR9HAA and ES80607.5 V
SR9HBB and HS8060
SR9HFF and GS8060-4
  • 後ろに-DB9が記載されている型番はコネクタDB9付きとなっております。 それ以外のケーブルについてはワイヤ素線で終端処理されています。
Diode Compatibility with Strain Relief Cables
Laser DiodesØ3.8 mmx
Ø5.6 mmo
Ø9.0 mmYes
TO Can PackagesTO-5x
TO-18o
TO-46o

Yes完全対応
o   互換性あり
x   使用不可

これらのストレインリリーフ&ESD防止ケーブルは、Ø5.6 mmまたはØ9 mm半導体レーザを当社の半導体レーザ用コントローラに接続するのに便利な製品となっております。 各モデルには、小さなプリント基板(PCB)を取付けたレーザーソケットが付いています。 PCBは半導体レーザに発生しうる逆電圧を阻止するショットキーダイオードとともに、半導体レーザに対する過度の電圧やESDを短絡させるツェナーダイオードを内蔵しています。

各モデルは1つ以上の標準的な半導体レーザのピンスタイルに対応します(下記の略図をご覧ください)。また当社の半導体レーザーコリメート用チューブおよび集光用チューブØ12 mm~Ø12.7 mm(Ø1/2インチ)ポスト取付け可能マウント半導体レーザ用ケージプレートマウントに取付け可能です。 SR9モデルは順方向電圧3.3 V用、SR9Hモデルは順方向電圧が最大7.5 Vの半導体レーザ用に設計されています。DB9コネクタ付き、もしくはコネクタなしでご用意しています。 -DB9が記載されたモデルのピンは当社の半導体レーザ用コントローラに対応しています(互換性はストレインリリーフケーブルとピン配列の図を確認してください)。

注)これらのケーブルは温度調節機能を備えておりません。半導体レーザの温度調節につきましては、半導体レーザーチュートリアルをご参照ください。

Supported Laser Diode Pin Codes
サポートするピンコード

+1 数量 資料 型番 - ユニバーサル規格 定価(税抜) 出荷予定日
SR9A Support Documentation
SR9AESD防止&ストレインリリーフケーブル、ピンコードA&E、3.3 V
¥8,136
Today
SR9A-DB9 Support Documentation
SR9A-DB9ESD防止&ストレインリリーフケーブル、ピンコードA&E、3.3 V、DB9コネクタ付き
¥8,667
Today
SR9B Support Documentation
SR9BESD防止&ストレインリリーフケーブル、ピンコードB&H、3.3 V
¥8,136
Today
SR9B-DB9 Support Documentation
SR9B-DB9ESD防止&ストレインリリーフケーブル、ピンコードB&H、3.3 V、DB9コネクタ付き
¥8,667
Today
SR9C Support Documentation
SR9CESD防止&ストレインリリーフケーブル、ピンコードC&H、3.3 V
¥8,136
Today
SR9C-DB9 Support Documentation
SR9C-DB9ESD防止&ストレインリリーフケーブル、ピンコードC&H、3.3 V、DB9コネクタ付き
¥8,667
Today
SR9D Support Documentation
SR9DESD防止&ストレインリリーフケーブル、ピンコードD、3.3 V
¥8,136
7-10 Days
SR9D-DB9 Support Documentation
SR9D-DB9ESD防止&ストレインリリーフケーブル、ピンコードD、3.3 V、DB9コネクタ付き
¥8,667
Today
SR9F Support Documentation
SR9FESD防止&ストレインリリーフケーブル、ピンコードF&G、3.3 V
¥8,136
Today
SR9F-DB9 Support Documentation
SR9F-DB9ESD防止&ストレインリリーフケーブル、ピンコードF&G、3.3 V、DB9コネクタ付き
¥8,667
Today
SR9HA Support Documentation
SR9HACustomer Inspired! ESD防止&ストレインリリーフケーブル、ピンコードA&E、7.5 V
¥8,136
Today
SR9HA-DB9 Support Documentation
SR9HA-DB9Customer Inspired! ESD防止&ストレインリリーフケーブル、ピンコードA&E、7.5 V、DB9コネクタ付き
¥8,667
Today
SR9HB Support Documentation
SR9HBCustomer Inspired! ESD防止&ストレインリリーフケーブル、ピンコードB&H、7.5 V
¥8,136
7-10 Days
SR9HB-DB9 Support Documentation
SR9HB-DB9Customer Inspired! ESD防止&ストレインリリーフケーブル、ピンコードB&H、7.5 V、DB9コネクタ付き
¥8,667
Today
SR9HF Support Documentation
SR9HFESD防止&ストレインリリーフケーブル、ピンコードF&G、7.5 V
¥8,136
Today
SR9HF-DB9 Support Documentation
SR9HF-DB9ESD防止&ストレインリリーフケーブル、ピンコードF&G、7.5 V、DB9コネクタ付き
¥8,667
Today